Monitoring Violations IL

Shelbyville

EPA ID: IL1730300 · 6,174 people served · 1 ZIP code

Pulled from the federal compliance ledger, 1 violation at Shelbyville remain without resolution — the utility delivers drinking water to roughly 6,174 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 81
Avg Safety Score
6,174
People Served
1
ZIP Code Served
2
Violations (5yr)
Groundwater
Water Source
0.0049 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
2
Contaminants Flagged
$132K
Median Home Value in Service Area

Service Area Map

Coverage area for Shelbyville Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$61,722
Median Household Income
7,422
Service Area Population
17%
Disadvantaged Population
60th
Poverty Percentile
80th
Energy Burden Percentile
79%
Pre-1986 Housing

The Shelbyville serves a community with a median household income of $61,722 and an estimated 7,422 residents across its service area. Approximately 79% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Shelbyville's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 1% of homes in Shelby County, Illinois rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

58 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
7 yr
Est. Remaining Life
Stable
Decay Status
Installed 89% of expected lifespan used End of life

Detected Contaminants

How Shelbyville compares to EPA limits

What This Means For You

Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded.

State limits: PFOA: 0.002 ppt, PFOS: 0.014 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Illinois

Braidwood
6,194 people
B 3 violations
Williamsville
6,198 people
C 1 violation
Fairfield
6,202 people
C 12 violations
Fort Massac Pwd
6,290 people
A 4 violations
Carmi
6,307 people
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

PFAS Treatment Radon Mitigation
PFAS Treatment $500
Radon Mitigation $400
Total Estimated Cost $900

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $900 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Shelbyville (EPA ID: IL1730300) is a community water system in Illinois that serves approximately 6,174 people from groundwater sources.

This system serves ZIP code 62565 in Shelbyville.

Average Home Safety Score: B (81/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 2, 2025 Stage 2 DBP Rule Monitoring Resolved
July 1, 2025 Surface Water Treatment Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 2 DBP Rule Treatment Failure 1 No
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
62565 0.0049 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IL or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Shelbyville (IL1730300) on EPA.gov.

Frequently Asked Questions

Is Shelbyville water safe to drink?

Shelbyville has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Shelbyville serve?

Shelbyville serves approximately 6,174 people across 1 ZIP code in Illinois.

Where does Shelbyville get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Contact information from SHELBYVILLE Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: SHELBYVILLE Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Treatment classification and chemical list sourced from SHELBYVILLE Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
58

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

11
Confirmed Lead
476
Galvanized — Replacement Required
3
Unknown Material
2,530
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-07-01 did not exceed the federal lead action level.
Population served: 5,600
Reported to Illinois

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Shelbyville safe to drink?
Shelbyville earns a B safety grade with 2 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Shelbyville's water?
Detected contaminants include Stage 2 DBP Rule, Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Shelbyville serve?
Shelbyville serves approximately 6,174 people with drinking water across 1 ZIP code.
What is Shelbyville's water source?
Shelbyville draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Shelbyville's water?
The maximum detected lead level is 0.0049 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Shelbyville's service area?
The Shelbyville service area has a median household income of $61,722. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Shelbyville get its water?
Shelbyville's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Shelbyville (EPA ID: IL1730300) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Illinois Shelbyville

Get safety alerts for Shelbyville, Illinois

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.