Port Byron
EPA ID: IL1610550 · 1,678 people served · 2 ZIP codes
Within the EPA compliance database, Port Byron shows 4 violations still pending resolution — a status that applies across the full service territory of approximately 1,678 people and reflects findings that have not yet cleared the federal enforcement process or received formal closure.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Port Byron Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The Port Byron serves a community with a median household income of $80,792 and an estimated 5,092 residents across its service area. Approximately 77% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 33% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
Port Byron's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 2% of homes in Rock Island County, Illinois rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 70th percentile nationally for proximity to wastewater discharge points.
Infrastructure Risk
Detected Contaminants
How Port Byron compares to EPA limits
What This Means For You
Surface Water Treatment Rule at 5 mg/L exceeds the EPA maximum of mg/L.
Contaminant 1032 at 2 mg/L exceeds the EPA maximum of mg/L.
Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Comparable Water Systems
Similar-sized systems in Illinois
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
PORT BYRON (EPA ID: IL1610550) is a community water system in Illinois that serves approximately 1,678 people from groundwater sources.
This system provides water to 2 ZIP codes across 2 communities.
Average Home Safety Score: D (51/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 2, 2025 | Stage 2 DBP Rule | Monitoring | Unresolved |
| July 1, 2025 | Surface Water Treatment Rule | Monitoring | Unresolved |
| April 1, 2025 | Contaminant 1032 | Health-based | Unresolved |
| July 1, 2024 | Surface Water Treatment Rule | Monitoring | Unresolved |
| July 1, 2023 | Surface Water Treatment Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Failure | 5 | No |
| Contaminant 1032 | Other Violation | 2 | Yes |
| Stage 2 DBP Rule | Treatment Failure | 1 | No |
| Lead and Copper Rule | Treatment Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 61275 | 0.005 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IL or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Port Byron (IL1610550) on EPA.gov.
Frequently Asked Questions
Is Port Byron water safe to drink?
Port Byron has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does Port Byron serve?
Port Byron serves approximately 1,678 people across 2 ZIP codes in Illinois.
Where does Port Byron get its water?
The primary water source is groundwater.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Notable events and violations
This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.
Notable events from the utility's CCR
These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.
- Manganese detected at 240-350 ppb; state MCL=150 ppb; report shows Violation=Y for Manganese
ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Port Byron (EPA ID: IL1610550) — request the latest Consumer Confidence Report or ask about specific contaminants.