Monitoring Violations IL

Sullivan

EPA ID: IL1390300 · 4,729 people served · 1 ZIP code

In the current EPA monitoring period, Sullivan has 1 violation still listed as unresolved, with the utility supplying water to approximately 4,729 residents.

Data: EPA SDWIS Last verified: 2026-04-02

C · 67
Avg Safety Score
4,729
People Served
1
ZIP Code Served
3
Violations (5yr)
Groundwater
Water Source
0.0013 mg/L
Max Lead Level
Zone 1
Radon Risk · High
1
Contaminants Flagged
$136K
Median Home Value in Service Area

Service Area Map

Coverage area for Sullivan Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$75,234
Median Household Income
7,654
Service Area Population
25%
Disadvantaged Population
50th
Poverty Percentile
50th
Energy Burden Percentile
64%
Pre-1986 Housing

The Sullivan serves a community with a median household income of $75,234 and an estimated 7,654 residents across its service area. Approximately 64% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Sullivan's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
10th
Superfund Site Proximity

About 2% of homes in Moultrie County, Illinois rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

50 yr
Avg Pipe Age
Copper
Pipe Material
20 yr
Est. Remaining Life
Stable
Decay Status
Installed 71% of expected lifespan used End of life

Detected Contaminants

How Sullivan compares to EPA limits

What This Means For You

Stage 1 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Illinois

Cherry Valley
4,731 people
C 5 violations
Petersburg
4,725 people
D 9 violations
Byron
4,743 people
D 2 violations
Eldorado
4,715 people
B 5 violations
Lebanon
4,714 people
B 1 violation

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance
Radon Mitigation $1,200
Flood Insurance $1,200
Total Estimated Cost $2,400

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $2,400 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Sullivan (EPA ID: IL1390300) is a community water system in Illinois that serves approximately 4,729 people from groundwater sources.

This system serves ZIP code 61951 in Sullivan.

Average Home Safety Score: C (67/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Stage 1 DBP Rule Monitoring Unresolved
July 1, 2024 Stage 1 DBP Rule Monitoring Resolved
October 1, 2023 Stage 1 DBP Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 3 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
61951 0.0013 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IL or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Sullivan (IL1390300) on EPA.gov.

Frequently Asked Questions

Is Sullivan water safe to drink?

Sullivan has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Sullivan serve?

Sullivan serves approximately 4,729 people across 1 ZIP code in Illinois.

Where does Sullivan get its water?

The primary water source is groundwater.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.

Source: SULLIVAN Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
58

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
2,166
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-07-01 did not exceed the federal lead action level.
Population served: 4,729
Reported to Illinois

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from SULLIVAN Consumer Confidence Report:
  • TTHM highest level = 104 ppb exceeds MCL of 80, but Violation column = N in report (LRAA compliance basis — locational running annual average may be below 80 ppb)
  • Lead 90th reported as 0 ppb with 1 site over AL noted — possible report anomaly

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Sullivan safe to drink?
Sullivan has a C safety grade based on 3 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Sullivan's water?
Detected contaminants include Stage 1 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Sullivan serve?
Sullivan serves approximately 4,729 people with drinking water across 1 ZIP code.
What is Sullivan's water source?
Sullivan draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Sullivan's water?
The maximum detected lead level is 0.0013 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Sullivan's service area?
The Sullivan service area has a median household income of $75,234. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Sullivan get its water?
Sullivan's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Sullivan (EPA ID: IL1390300) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Illinois Sullivan

Get safety alerts for Sullivan, Illinois

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.