Health Violations Found IL 1 HEALTH VIOLATION

Gillespie

EPA ID: IL1170400 · 3,737 people served · 1 ZIP code

Unlike fully compliant utilities, Gillespie has 6 outstanding EPA violations for approximately 3,737 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 79
Avg Safety Score
3,737
People Served
1
ZIP Code Served
9
Violations (5yr)
Surface Water
Water Source
0.0048 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
4
Contaminants Flagged
$105K
Median Home Value in Service Area

Service Area Map

Coverage area for Gillespie Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$75,477
Median Household Income
4,398
Service Area Population
38%
Disadvantaged Population
50th
Poverty Percentile
70th
Energy Burden Percentile
79%
Pre-1986 Housing

The Gillespie serves a community with a median household income of $75,477 and an estimated 4,398 residents across its service area. Approximately 79% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 38% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Gillespie's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
30th
Superfund Site Proximity

About 1% of homes in Macoupin County, Illinois rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

72 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
0 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How Gillespie compares to EPA limits

Total Trihalomethanes (TTHM) 4 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns

What This Means For You

Total Trihalomethanes (TTHM) at 4 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Stage 2 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Illinois

0 violations
0 violations
Pleasant Valley Pwd
3,783 people
0 violations
Greene County Rwd
3,786 people
0 violations
Red Bud
3,804 people
C 5 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $1,200
Radon Mitigation $400
Water Filtration $300
Total Estimated Cost $1,900

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $1,900 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Gillespie (EPA ID: IL1170400) is a community water system in Illinois that serves approximately 3,737 people from surface water sources.

This system serves ZIP code 62033 in Gillespie.

Average Home Safety Score: B (79/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. 6 remain unresolved.

Recent Violations

Date Contaminant Type Status
August 22, 2025 Lead and Copper Rule Monitoring Unresolved
July 24, 2025 Total Trihalomethanes (TTHM) Monitoring Unresolved
July 2, 2025 Stage 2 DBP Rule Monitoring Unresolved
April 25, 2025 Total Trihalomethanes (TTHM) Monitoring Unresolved
October 17, 2024 Stage 2 DBP Rule Health-based Unresolved
October 17, 2024 Stage 2 DBP Rule Monitoring Unresolved
February 1, 2024 Consumer Confidence Report Rule Monitoring Resolved
January 1, 2024 Total Trihalomethanes (TTHM) Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 4 No
Stage 2 DBP Rule Treatment Failure 3 Yes
Lead and Copper Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
62033 0.0048 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IL or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Gillespie (IL1170400) on EPA.gov.

Frequently Asked Questions

Is Gillespie water safe to drink?

Gillespie has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Gillespie serve?

Gillespie serves approximately 3,737 people across 1 ZIP code in Illinois.

Where does Gillespie get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Frequently Asked Questions

Is water from Gillespie safe to drink?
Gillespie earns a B safety grade with 9 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Gillespie's water?
Detected contaminants include Total Trihalomethanes (TTHM), Stage 2 DBP Rule, Lead and Copper Rule, Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Gillespie serve?
Gillespie serves approximately 3,737 people with drinking water across 1 ZIP code.
What is Gillespie's water source?
Gillespie draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Gillespie's water?
The maximum detected lead level is 0.0048 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Gillespie's service area?
The Gillespie service area has a median household income of $75,477. EPA EJScreen data classifies 38% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Gillespie get its water?
Gillespie's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Gillespie (EPA ID: IL1170400) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Illinois Gillespie

Get safety alerts for Gillespie, Illinois

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.