Oglesby
EPA ID: IL0990700 · 4,500 people served · 1 ZIP code
While corrective steps may be in progress, Oglesby currently shows 1 EPA violation unresolved — serving a population of approximately 4,500.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 3 (2022) to 1 (2024). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Oglesby Source: EPA SDWIS service area boundaries.
Service area boundary — Grade B
Service Area Demographics
The Oglesby serves a community with a median household income of $71,197 and an estimated 4,397 residents across its service area. Approximately 78% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Oglesby's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in LaSalle County, Illinois rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 80th percentile nationally for proximity to wastewater discharge points.
Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.
Infrastructure Risk
Detected Contaminants
How Oglesby compares to EPA limits
What This Means For You
Lead and Copper Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Revised Total Coliform Rule at 1 presence exceeds the EPA maximum of presence.
Comparable Water Systems
Similar-sized systems in Illinois
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Oglesby (EPA ID: IL0990700) is a community water system in Illinois that serves approximately 4,500 people from groundwater sources.
This system serves ZIP code 61348 in Oglesby.
Average Home Safety Score: B (77/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 2, 2025 | Stage 2 DBP Rule | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Lead and Copper Rule | Treatment Failure | 2 | No |
| Stage 2 DBP Rule | Treatment Failure | 1 | No |
| Surface Water Treatment Rule | Treatment Failure | 1 | No |
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
| Revised Total Coliform Rule | Microbiological | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 61348 | 0.00746 mg/L | No | N/A |
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IL or modeled from parcel and building-footprint data.
- 61348 — Oglesby
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Oglesby (IL0990700) on EPA.gov.
Frequently Asked Questions
Is Oglesby water safe to drink?
Oglesby has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Oglesby serve?
Oglesby serves approximately 4,500 people across 1 ZIP code in Illinois.
Where does Oglesby get its water?
The primary water source is groundwater.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment chemicals and what each one does
Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.
Treatment classification and chemical list sourced from OGLESBY Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Oglesby (EPA ID: IL0990700) — request the latest Consumer Confidence Report or ask about specific contaminants.