Monitoring Violations IL

Elmwood Park

EPA ID: IL0310780 · 25,000 people served · 1 ZIP code

Looking at the EPA enforcement file for Elmwood Park, 2 violations are listed as unresolved — those findings cover the utility's service area of approximately 25,000 people and remain open in the federal compliance system, awaiting formal corrective action documentation.

Data: EPA SDWIS Last verified: 2026-04-02

C · 64
Avg Safety Score
25,000
People Served
1
ZIP Code Served
2
Violations (5yr)
Surface Water
Water Source
0.0072 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
2
Contaminants Flagged
$315K
Median Home Value in Service Area

Service Area Map

Coverage area for Elmwood Park Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$82,746
Median Household Income
40,897
Service Area Population
46%
Disadvantaged Population
50th
Poverty Percentile
40th
Energy Burden Percentile
85%
Pre-1986 Housing

The Elmwood Park serves a community with a median household income of $82,746 and an estimated 40,897 residents across its service area. Approximately 85% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 46% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Elmwood Park's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
40th
Superfund Site Proximity

About 1% of homes in Cook County, Illinois rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

72 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
0 yr
Est. Remaining Life
Stable
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How Elmwood Park compares to EPA limits

What This Means For You

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Illinois

Harvey
25,000 people
C 3 violations
Belvidere
25,070 people
C 2 violations
West Chicago
25,166 people
B 2 violations
Morton Grove
25,297 people
D 3 violations
Zion
24,442 people
D 6 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation
Flood Insurance $1,200
Radon Mitigation $400
Total Estimated Cost $1,600

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,600 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Elmwood Park (EPA ID: IL0310780) is a community water system in Illinois that serves approximately 25,000 people from surface water sources.

This system serves ZIP code 60707 in Elmwood Park.

Average Home Safety Score: C (64/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Stage 1 DBP Rule Monitoring Unresolved
July 1, 2025 Surface Water Treatment Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 1 No
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
60707 0.0072 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IL or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Elmwood Park (IL0310780) on EPA.gov.

Frequently Asked Questions

Is Elmwood Park water safe to drink?

Elmwood Park has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Elmwood Park serve?

Elmwood Park serves approximately 25,000 people across 1 ZIP code in Illinois.

Where does Elmwood Park get its water?

The primary water source is surface water.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Chlorine

Source: ELMWOOD PARK Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from ELMWOOD PARK Consumer Confidence Report:
The source water assessment for our supply has been completed by the Illinois EPA. If you would like a copy of this information, please stop by City Hall or call our water operator at __________________. To view a summary version of the completed Source Water Assessments, including: Importance of Source Water; Susceptibility to Contamination Determination; and documentation/recommendation of Source Water Protection Efforts, you may access the Illinois EPA website at http://www.epa.state.il.us/cgi-bin/wp/swap-fact-sheets.pl.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment classification and chemical list sourced from ELMWOOD PARK Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
87

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

6,329
Confirmed Lead
15
Galvanized — Replacement Required
0
Unknown Material
40
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-07-01 did not exceed the federal lead action level.
Population served: 25,000
Reported to Illinois

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Elmwood Park safe to drink?
Elmwood Park has a C safety grade based on 2 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Elmwood Park's water?
Detected contaminants include Stage 1 DBP Rule, Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Elmwood Park serve?
Elmwood Park serves approximately 25,000 people with drinking water across 1 ZIP code.
What is Elmwood Park's water source?
Elmwood Park draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Elmwood Park's water?
The maximum detected lead level is 0.0072 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Elmwood Park's service area?
The Elmwood Park service area has a median household income of $82,746. EPA EJScreen data classifies 46% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Elmwood Park get its water?
Elmwood Park's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Elmwood Park (EPA ID: IL0310780) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Illinois Elmwood Park

Get safety alerts for Elmwood Park, Illinois

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.