Monitoring Violations IL

Martinsville

EPA ID: IL0230150 · 1,200 people served · 2 ZIP codes

Federal data shows 1 unresolved violation at Martinsville — roughly 1,200 residents in the service area.

Data: EPA SDWIS Last verified: 2026-04-02

B · 76
Avg Safety Score
1,200
People Served
2
ZIP Codes Served
1
Violations (5yr)
Groundwater
Water Source
0.00637 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
1
Contaminants Flagged
$103K
Median Home Value in Service Area

Service Area Map

Coverage area for Martinsville Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$66,618
Median Household Income
6,990
Service Area Population
25%
Disadvantaged Population
60th
Poverty Percentile
70th
Energy Burden Percentile
79%
Pre-1986 Housing

The Martinsville serves a community with a median household income of $66,618 and an estimated 6,990 residents across its service area. Approximately 79% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Martinsville's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
60th
Superfund Site Proximity

About 0% of homes in Clark County, Illinois rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 60th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.

Infrastructure Risk

61 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
5 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 92% of expected lifespan used End of life

Detected Contaminants

How Martinsville compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded.

State limits: PFOA: 0.002 ppt, PFOS: 0.014 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Illinois

St Anne
1,200 people
C 7 violations
Stillman Valley
1,200 people
B 0 violations
Laharpe
1,200 people
F 6 violations
Homer
1,200 people
C 0 violations
Chrisman
1,200 people
D 17 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation PFAS Treatment Water Filtration
Radon Mitigation $400
PFAS Treatment $250
Water Filtration $150
Total Estimated Cost $800

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $800 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Martinsville (EPA ID: IL0230150) is a community water system in Illinois that serves approximately 1,200 people from groundwater sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: B (76/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Surface Water Treatment Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
62442 0.00637 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IL or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Martinsville (IL0230150) on EPA.gov.

Frequently Asked Questions

Is Martinsville water safe to drink?

Martinsville has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Martinsville serve?

Martinsville serves approximately 1,200 people across 2 ZIP codes in Illinois.

Where does Martinsville get its water?

The primary water source is groundwater.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.

Source: MARTINSVILLE Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
599
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 1,200
Reported to Illinois

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Martinsville safe to drink?
Martinsville earns a B safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Martinsville's water?
Detected contaminants include Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Martinsville serve?
Martinsville serves approximately 1,200 people with drinking water across 2 ZIP codes.
What is Martinsville's water source?
Martinsville draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Martinsville's water?
The maximum detected lead level is 0.00637 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Martinsville's service area?
The Martinsville service area has a median household income of $66,618. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Martinsville get its water?
Martinsville's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Martinsville (EPA ID: IL0230150) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Illinois Martinsville

Get safety alerts for Martinsville, Illinois

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.