Regional Water
EPA ID: IA8300184 · 4,132 people served · 3 ZIP codes
Compliance tracking for Regional Water shows 2 pending violations logged in the EPA system — the supplier delivers water to approximately 4,132 residents while those findings remain open.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Regional Water Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The Regional Water serves a community with a median household income of $69,286 and an estimated 4,703 residents across its service area. Approximately 81% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
🌊 Where Does Your Water Come From?
Regional Water's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Pottawattamie County, Iowa rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Regional Water compares to EPA limits
What This Means For You
Stage 1 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Copper at 2 mg/L exceeds the EPA maximum of 1.3 mg/L.
Comparable Water Systems
Similar-sized systems in Iowa
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Regional Water (EPA ID: IA8300184) is a community water system in Iowa that serves approximately 4,132 people from surface water sources.
This system provides water to 3 ZIP codes across 3 communities.
Average Home Safety Score: C (60/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2025 | Copper | Monitoring | Unresolved |
| July 1, 2024 | Copper | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Copper | Inorganic | 2 | No |
| Stage 1 DBP Rule | Treatment Failure | 2 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IA or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Regional Water (IA8300184) on EPA.gov.
Frequently Asked Questions
Is Regional Water water safe to drink?
Regional Water has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Regional Water serve?
Regional Water serves approximately 4,132 people across 3 ZIP codes in Iowa.
Where does Regional Water get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Regional Water (EPA ID: IA8300184) — request the latest Consumer Confidence Report or ask about specific contaminants.