Monitoring Violations IA

Lone Tree Muni Water System

EPA ID: IA5240095 · 1,357 people served · 2 ZIP codes

Compliance tracking for Lone Tree Muni Water System shows 3 pending violations logged in the EPA system — the supplier delivers water to approximately 1,357 residents while those findings remain open.

Data: EPA SDWIS Last verified: 2026-04-02

C · 64
Avg Safety Score
1,357
People Served
2
ZIP Codes Served
4
Violations (5yr)
Groundwater
Water Source
0.002 mg/L
Max Lead Level
Zone 1
Radon Risk · High
4
Contaminants Flagged
$192K
Median Home Value in Service Area

Service Area Map

Coverage area for Lone Tree Muni Water System Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$81,025
Median Household Income
32,010
Service Area Population
32%
Disadvantaged Population
55th
Poverty Percentile
70th
Energy Burden Percentile
73%
Pre-1986 Housing

The Lone Tree Muni Water System serves a community with a median household income of $81,025 and an estimated 32,010 residents across its service area. Approximately 73% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 32% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Lone Tree Muni Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
65th
Wastewater Discharge Proximity
15th
Superfund Site Proximity

About 2% of homes in Louisa County, Iowa rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Wastewater Proximity Note: This service area ranks in the 65th percentile nationally for proximity to wastewater discharge points.

Infrastructure Risk

55 yr
Avg Pipe Age
Copper
Pipe Material
13 yr
Est. Remaining Life
Accelerating Decay
Decay Status
Installed 81% of expected lifespan used End of life

Detected Contaminants

How Lone Tree Muni Water System compares to EPA limits

Total Trihalomethanes (TTHM) 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns
Copper 1 mg/L (77% of limit)
0 EPA Limit: 1.3 mg/L

What This Means For You

Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 7 detections recorded. 2 exceed federal EPA limits (4 ppt for PFOA/PFOS).

Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Iowa

C 1 violation
Woodward Water Supply
1,346 people
0 violations
C 7 violations
Lenox Water Supply
1,339 people
D 0 violations
Sanborn Water Supply
1,392 people
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,500
Radon Mitigation $1,200
PFAS Treatment $300
Water Filtration $150
Total Estimated Cost $3,150

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $3,150 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Lone Tree Muni Water System (EPA ID: IA5240095) is a community water system in Iowa that serves approximately 1,357 people from groundwater sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: C (64/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

4 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
January 1, 2025 Consumer Confidence Report Rule Monitoring Unresolved
August 1, 2024 Total Trihalomethanes (TTHM) Monitoring Unresolved
January 1, 2023 Copper Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Copper Inorganic 1 No
Total Trihalomethanes (TTHM) Disinfection Byproducts 1 No
Stage 1 DBP Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
52755 0.002 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Lone Tree Muni Water System (IA5240095) on EPA.gov.

Frequently Asked Questions

Is Lone Tree Muni Water System water safe to drink?

Lone Tree Muni Water System has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Lone Tree Muni Water System serve?

Lone Tree Muni Water System serves approximately 1,357 people across 2 ZIP codes in Iowa.

Where does Lone Tree Muni Water System get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

10
Confirmed Lead
35
Galvanized — Replacement Required
18
Unknown Material
480
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2024-01-01 did not exceed the federal lead action level.
Population served: 1,357
Reported to Iowa

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Lone Tree Muni Water System safe to drink?
Lone Tree Muni Water System has a C safety grade based on 4 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Lone Tree Muni Water System's water?
Detected contaminants include Total Trihalomethanes (TTHM), Stage 1 DBP Rule, Consumer Confidence Report Rule, Copper. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Lone Tree Muni Water System serve?
Lone Tree Muni Water System serves approximately 1,357 people with drinking water across 2 ZIP codes.
What is Lone Tree Muni Water System's water source?
Lone Tree Muni Water System draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Lone Tree Muni Water System's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Lone Tree Muni Water System's service area?
The Lone Tree Muni Water System service area has a median household income of $81,025. EPA EJScreen data classifies 32% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Lone Tree Muni Water System get its water?
Lone Tree Muni Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Lone Tree Muni Water System (EPA ID: IA5240095) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Iowa Lone Tree Muni Water System

Get safety alerts for Lone Tree Muni Water System, Iowa

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.