Monitoring Violations IA

Belle Plaine Water Department

EPA ID: IA0610099 · 2,380 people served · 2 ZIP codes

Five-year compliance data for Belle Plaine Water Department includes 5 violations the EPA has not yet marked resolved — those open findings are part of the utility's current enforcement profile, covering a service population of approximately 2,380 residents across the area it supplies.

Data: EPA SDWIS Last verified: 2026-04-02

D · 42
Avg Safety Score
2,380
People Served
2
ZIP Codes Served
21
Violations (5yr)
Groundwater
Water Source
0.0098 mg/L
Max Lead Level
Zone 1
Radon Risk · High
6
Contaminants Flagged

Service Area Map

Coverage area for Belle Plaine Water Department Source: EPA SDWIS service area boundaries.

Service area boundary — Grade D

Service Area Demographics

$88,043
Median Household Income
3,168
Service Area Population
0%
Disadvantaged Population
40th
Poverty Percentile
80th
Energy Burden Percentile
85%
Pre-1986 Housing

The Belle Plaine Water Department serves a community with a median household income of $88,043 and an estimated 3,168 residents across its service area. Approximately 85% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Belle Plaine Water Department's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
30th
Superfund Site Proximity

About 0% of homes in Benton County, Iowa rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

96 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
0 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How Belle Plaine Water Department compares to EPA limits

Copper 4 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 1.3 mg/L

What This Means For You

Surface Water Treatment Rule at 4 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 4 mg/L exceeds the EPA maximum of mg/L.

Copper at 4 mg/L exceeds the EPA maximum of 1.3 mg/L.

Lead and Copper Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Contaminant 1052 at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Iowa

Hull Water Supply
2,384 people
C 0 violations
C 0 violations
C 3 violations
C 1 violation
Toledo Water Supply
2,399 people
C 1 violation

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance
Radon Mitigation $1,200
Flood Insurance $600
Total Estimated Cost $1,800

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$7,500
10 years
$15,000
20 years
$30,000

Compare: Estimated remediation cost is $1,800 (one-time) vs. $15,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Belle Plaine Water Department (EPA ID: IA0610099) is a community water system in Iowa that serves approximately 2,380 people from groundwater sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: D (42/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

21 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Surface Water Treatment Rule Monitoring Unresolved
April 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
April 1, 2025 Copper Monitoring Resolved
August 20, 2024 Lead and Copper Rule Monitoring Unresolved
July 1, 2024 Surface Water Treatment Rule Monitoring Unresolved
July 1, 2024 Unknown Monitoring Resolved
March 1, 2024 Consumer Confidence Report Rule Monitoring Resolved
January 1, 2024 Copper Monitoring Resolved
August 1, 2023 Consumer Confidence Report Rule Monitoring Resolved
May 1, 2023 Unknown Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Copper Inorganic 4 No
Surface Water Treatment Rule Treatment Failure 4 No
Consumer Confidence Report Rule Reporting Failure 4 No
Lead and Copper Rule Treatment Failure 3 No
Contaminant 1052 Other Violation 1 No
Total Coliform Microbiological 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
52208 0.0098 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Belle Plaine Water Department (IA0610099) on EPA.gov.

Frequently Asked Questions

Is Belle Plaine Water Department water safe to drink?

Belle Plaine Water Department has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Belle Plaine Water Department serve?

Belle Plaine Water Department serves approximately 2,380 people across 2 ZIP codes in Iowa.

Where does Belle Plaine Water Department get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
58

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

147
Confirmed Lead
3
Galvanized — Replacement Required
397
Unknown Material
658
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 2,380
Reported to Iowa

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Belle Plaine Water Department safe to drink?
Belle Plaine Water Department has a D safety grade based on 21 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Belle Plaine Water Department's water?
Detected contaminants include Surface Water Treatment Rule, Consumer Confidence Report Rule, Copper, Lead and Copper Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Belle Plaine Water Department serve?
Belle Plaine Water Department serves approximately 2,380 people with drinking water across 2 ZIP codes.
What is Belle Plaine Water Department's water source?
Belle Plaine Water Department draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Belle Plaine Water Department's water?
The maximum detected lead level is 0.0098 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Belle Plaine Water Department's service area?
The Belle Plaine Water Department service area has a median household income of $88,043. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Belle Plaine Water Department get its water?
Belle Plaine Water Department's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Belle Plaine Water Department (EPA ID: IA0610099) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Iowa Belle Plaine Water Department

Get safety alerts for Belle Plaine Water Department, Iowa

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.