Bristol, City of Water System
EPA ID: FL1390087 · 2,688 people served · 3 ZIP codes
Where compliant utilities carry no open actions, Bristol, City of Water System shows 13 active EPA violations in the federal database for a service population of approximately 2,688.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 2 (2022) to 1 (2024). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Bristol, City of Water System Source: EPA SDWIS service area boundaries.
Service area boundary — Grade B
Service Area Demographics
The Bristol, City of Water System serves a community with a median household income of $54,436 and an estimated 7,650 residents across its service area. Approximately 46% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 100% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
Bristol, City of Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in Liberty County, Florida rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Bristol, City of Water System compares to EPA limits
What This Means For You
Haloacetic Acids (HAA5) at 2 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.
Total Trihalomethanes (TTHM) at 2 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.
Total Coliform at 6 presence exceeds the EPA maximum of presence.
Consumer Confidence Report Rule at 6 mg/L exceeds the EPA maximum of mg/L.
Haloacetic Acids (HAA5) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Florida
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Bristol, City of Water System (EPA ID: FL1390087) is a community water system in Florida that serves approximately 2,688 people from groundwater sources.
This system provides water to 3 ZIP codes across 3 communities.
Average Home Safety Score: B (75/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| October 1, 2024 | Total Trihalomethanes (TTHM) | Monitoring | Unresolved |
| July 1, 2024 | Total Trihalomethanes (TTHM) | Health-based | Resolved |
| March 1, 2023 | Consumer Confidence Report Rule | Monitoring | Resolved |
| March 1, 2023 | Total Coliform | Monitoring | Resolved |
| February 1, 2023 | Consumer Confidence Report Rule | Monitoring | Unresolved |
| February 1, 2023 | Total Coliform | Monitoring | Unresolved |
| January 1, 2023 | Total Coliform | Monitoring | Unresolved |
| January 1, 2023 | Consumer Confidence Report Rule | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Total Coliform | Microbiological | 6 | No |
| Consumer Confidence Report Rule | Reporting Failure | 6 | No |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 2 | Yes |
| Haloacetic Acids (HAA5) | Disinfection Byproducts | 2 | Yes |
Health Risk Details
Total Trihalomethanes (TTHM) (EPA limit: 0.08 mg/L)
Bladder & rectal cancer risk; reproductive concerns At-risk groups: pregnant women, long-term consumers of chlorinated water, people who frequently shower in chlorinated water.
Removal methods: granular activated carbon (GAC), carbon block filter, point-of-entry aeration. Find the right filter →
Haloacetic Acids (HAA5) (EPA limit: 0.06 mg/L)
Cancer risk; reproductive & developmental effects At-risk groups: pregnant women, infants, long-term consumers of chlorinated municipal water.
Removal methods: granular activated carbon (GAC), carbon block filter, reverse osmosis. Find the right filter →
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 32321 | 0.001 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 2 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bristol, City of Water System (FL1390087) on EPA.gov.
Frequently Asked Questions
Is Bristol, City of Water System water safe to drink?
Bristol, City of Water System has recorded 3 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does Bristol, City of Water System serve?
Bristol, City of Water System serves approximately 2,688 people across 3 ZIP codes in Florida.
Where does Bristol, City of Water System get its water?
The primary water source is groundwater.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: FDEP PWS Lead Service Line Inventories (LSLI) · Submitted 2024
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Bristol, City of Water System (EPA ID: FL1390087) — request the latest Consumer Confidence Report or ask about specific contaminants.