Free Area Context

EPA Radon Zone Context

Check your ZIP code's EPA radon zone and get testing guidance without treating a model as a home measurement.

About This Tool
Enter your ZIP code and foundation type to get EPA radon zone context, testing options, and mitigation information. A zone is not a home radon measurement.
  • EPA radon zone (1-3) as county-level screening context
  • Available foundation and housing context, with unknown values left unknown
  • Testing options and official follow-up guidance
Based on the EPA Map of Radon Zones and U.S. Census ACS area housing data.
Used to look up EPA radon zone and housing data

How This Calculator Works

  1. Enter your ZIP code - we look up the EPA radon zone classification (Zone 1 = highest potential, Zone 3 = lower potential).
  2. Specify your foundation type - basements have the highest radon entry potential.
  3. Get county-level context - testing guidance and mitigation information, with no claim about an unmeasured home level.

EPA Radon Zones Explained

EPA radon zones describe county-level potential. They are not indoor-air measurements and cannot determine whether a building is above or below an action level. Test the specific home before making a threshold-based decision.

Why Radon Matters

Radon is a naturally occurring radioactive gas that comes from the decay of uranium in soil and rock. It enters homes through cracks in foundations, gaps around pipes, and other openings. The EPA and Surgeon General recommend testing all homes below the third floor.

A home test result, not a county zone, is the evidence used for any comparison with the EPA indoor-air action level.

Data sources: EPA Map of Radon Zones for county-level potential and U.S. Census ACS for area housing context.

Find your official state radon program, testing guidance, and local contacts.

Find Your State Radon Program

The EPA map links to official state radon programs. Provider certification and availability vary by state.

Data Sources & Methodology

Data Sources

Methodology

We map your ZIP code to its EPA radon zone and show available housing context. We do not calculate a home pCi/L result or compare a model with the EPA action level. Cost information reflects typical sub-slab depressurization system installations.

Last updated: 2026-04
EPA zones are county-level averages. Actual radon levels vary house by house based on soil geology, foundation cracks, and ventilation. The only way to know your home's radon level is to test.
HomeTools → EPA Radon Zone Context

Frequently Asked Questions

What radon level is dangerous?

The EPA recommends fixing a home if a measured radon test result is 4 pCi/L or more. An EPA county zone is not a home test and cannot be compared with that action level.

How do I test my home for radon?

Short-term test kits ($12-30 at hardware stores) measure radon over 2-7 days and give a quick screening result. Long-term test kits (90+ days) provide a more accurate annual average. Digital continuous radon monitors ($150-200) give ongoing readings. Place the test in the lowest livable area of your home with windows and doors closed.

When should I consider radon mitigation?

A standard sub-slab depressurization system costs $800-2,500 for most homes. This involves installing a pipe through the foundation slab and a fan that draws radon gas from beneath the home and vents it above the roofline. The system runs continuously and typically reduces radon levels by 80-99%. Annual electricity cost is about $50-75.

Can new homes have radon problems?

Yes. Radon comes from natural uranium decay in soil and rock beneath any building regardless of age. New construction may have radon-resistant features (sealed foundation, passive pipe), but these do not guarantee low levels. The EPA recommends testing every home, including new construction, before and after occupancy.

How does radon enter a home?

Radon seeps into buildings through cracks in foundation slabs, gaps around pipes and wires, construction joints, crawl spaces, and well water. The pressure difference between indoor air and soil drives radon upward. Basements and first floors typically have the highest concentrations. Granite countertops are not a significant radon source despite common claims.

0 ZIP Codes Analyzed
0+ Government Data Sources
0 Contaminants Tracked
Updated Daily From Federal Databases
Data sources include:
EPA CPSC DOE NWS NCES Census

Get safety alerts

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool - no phone call required.

Share your results

Help your neighbors discover what's in their water - share your results with your community.