PFAS in Alabama: 319 ZIP Codes Linked to PFAS Detections
319 ZIPs linked to PFAS sampling ยท 123 with samples above federal MCL levels (39%)
Data source: EPA UCMR 3/5, SDWIS, ECHO, DOD
ZipCheckup's PFAS reading for Alabama: 123 of 319 tested ZIP codes (39%) are linked to water systems with a UCMR result above the value of an EPA PFAS MCL, with compliance required from 2029. Separately, the state has 13 Superfund sites (not screened for PFAS) and 25 military sites in Department of Defense PFAS investigations.
PFAS Contamination Summary
| Metric | Value |
|---|---|
| ZIP codes with PFAS detections | 319 |
| ZIP codes with a PFAS sample above an EPA MCL level (MCL takes effect in 2029) | 123 (39%) |
| Superfund sites | 13 |
| Military bases with PFAS records in our data | 25 of 35 |
| Testing coverage | 39% of state ZIP codes |
| Untested ZIP codes | 496 |
Most Common PFAS Compounds Detected
| Compound | ZIP Codes with Detections |
|---|---|
| PFBS | 248 |
| PFBA | 241 |
| PFPeA | 218 |
| PFHxA | 212 |
| PFOS | 180 |
| PFOA | 177 |
Worst-Affected Areas in Alabama
The following ZIP codes in Alabama are mapped to water systems with the most reported PFAS detections:
| Rank | ZIP Code | City | PFAS Types | Total Detections | Exceeds EPA Limit |
|---|---|---|---|---|---|
| 1 | 35674 | Tuscumbia | 8 | 234 | Yes |
| 2 | 35661 | Muscle Shoals | 8 | 169 | Yes |
| 3 | 36561 | Orange Beach | 11 | 152 | Yes |
| 4 | 35646 | Leighton | 8 | 150 | Yes |
| 5 | 35672 | Town Creek | 8 | 128 | Yes |
| 6 | 35653 | Russellville | 8 | 122 | Yes |
| 7 | 35616 | Cherokee | 8 | 120 | Yes |
| 8 | 35147 | Sterrett | 8 | 86 | Yes |
| 9 | 35178 | Vincent | 8 | 86 | Yes |
| 10 | 35951 | Albertville | 7 | 86 | Yes |
Check our PFAS map for reported detections associated with water systems serving your area.
Sources of PFAS Contamination in Alabama
Potential sources of PFAS in Alabama include:
Military Installations
25 military bases in Alabama are linked to PFAS contamination in these records; aqueous film-forming foam (AFFF) used in firefighting training is a possible source at military sites.
Key installations include:
- Anniston Army Depot
- Maxwell Air Force Base
- 3M Decatur facility
- Redstone Arsenal
Superfund Sites
Alabama has 13 Superfund sites; this count does not establish a link to PFAS in drinking water. Sites include:
- ALABAMA ARMY AMMUNITION PLANT
- ALABAMA PLATING COMPANY INC
- 35TH AVENUE
- INTERSTATE LEAD CO ILCO
- ANNISTON ARMY DEPOT SOUTHEAST INDUSTRIAL AREA
Industrial and Municipal Sources
Beyond military and Superfund sites, other potential PFAS sources in Alabama include:
- Industrial facilities that make or use PFAS-containing products (a potential source)
- Airports that used AFFF firefighting foam
- Wastewater treatment plants, which can receive industrial discharge containing PFAS
- Landfills, which can receive PFAS-containing consumer products
Alabama PFAS Regulations
Alabama does not currently have state-specific PFAS drinking water standards. The federal EPA PFAS rule (April 2024) sets MCLs of 4 ppt for PFOA and PFOS; covered water systems are required to comply by 2029.
Some states have moved faster than the federal government. Check our PFAS contaminant guide for the full federal standard and how it compares to state-level action.
Testing Gaps
Only 39% of ZIP codes in Alabama have public PFAS testing data in our records. That leaves 496 ZIP codes with no PFAS results mapped in our records.
The EPA requires community and non-transient non-community water systems to complete initial PFAS monitoring by 2027. Until then, residents whose water has no mapped PFAS result may want to consider independent water testing or a filter certified for PFAS reduction.
What Alabama Residents Can Do
1. Check Your Water
Enter your ZIP code on ZipCheckup to see mapped PFAS detections and water-system violation records associated with your area.
2. Get Your Water Tested
If a water system serving your ZIP code has a PFAS detection, or no PFAS result is mapped for your area, consider a certified lab test. Look for a laboratory certified to test drinking water for PFAS using EPA Method 533 or 537.1. Before ordering, check which PFAS compounds a test measures and whether it includes the compounds regulated by EPA.
3. Install a Certified Filter
Home treatment options that can reduce some PFAS:
- Reverse osmosis (RO) systems certified to NSF 58 for PFOA/PFOS reduction
- Granular activated carbon (GAC) filters certified to NSF/ANSI 53 for PFOA/PFOS reduction can reduce those compounds
- Ion exchange systems are effective for short-chain PFAS
Use our Filter Matcher tool to find NSF-certified filters that remove PFAS.
4. Check for Lead Risk Too
Lead service line risk is separate from PFAS results and should be checked on its own. Use our Lead Risk Calculator to assess your home's lead exposure risk.
Frequently Asked Questions
How many ZIP codes in Alabama are linked to water-system PFAS detections?
Based on EPA data, 319 ZIP codes in Alabama are linked to a public water system with a PFAS detection. Of those, 123 (39%) had a PFOA or PFOS sample above the level of the 4 ppt federal MCL, which takes effect in 2029.
Is my water safe to drink in Alabama?
It depends on your location. 123 ZIP codes in Alabama had a PFAS sample above the level of a federal MCL, which takes effect in 2029. Enter your ZIP code on ZipCheckup to see your area's specific results. If PFAS are a concern, consider a filter certified for reduction of the specific PFAS in your water.
Does Alabama have its own PFAS limits?
Alabama does not currently have state-specific PFAS drinking water standards. The federal EPA rule (April 2024) sets MCLs of 4 ppt for PFOA and PFOS, and community and non-transient non-community water systems must comply by 2029.
What is the best water filter for PFAS in Alabama?
Reverse osmosis (RO) systems certified to NSF 58 for PFOA/PFOS reduction are among the most effective options for reducing PFAS. Granular activated carbon (GAC) filters certified to NSF 53 for PFOA/PFOS reduction also reduce PFAS. Use the ZipCheckup Filter Matcher tool to find certified filters for your specific contaminants.
Where does PFAS contamination in Alabama come from?
Potential PFAS source types include 25 military bases that used AFFF firefighting foam, 13 Superfund sites, industrial facilities, airports, and wastewater treatment plants. PFAS are also found in landfill leachate from consumer products containing these chemicals.
Why is there no PFAS result mapped to my area?
Public PFAS monitoring results in our records cover water systems mapped to only 39% of ZIP codes in Alabama. The EPA requires community and non-transient non-community water systems to complete initial PFAS monitoring by 2027 under the federal PFAS rule. Until then, you can ask a certified laboratory about PFAS testing using EPA Method 533 or 537.1 and its current price.