Belmont County Water Quality: 316 Violations (OH)
18 water systems · 14 ZIP codes · Home Safety Score 49/100 (D) · 12 of 27 tracked ZIP records scored · Updated
Data: EPA Safe Drinking Water Information System (SDWIS), EPA ECHO Last verified:
Concerned about water quality in Belmont County?
Get connected with a certified testing service.
Find the Right Filter →Water Quality Overview
Belmont County has 18 community water systems across 14 directly mapped ZIP records. The systems report serving approximately 66,707 people. The available records contain 316 EPA violations, including 33 health-based violations.
Health-based violations account for 10% of all violations in Belmont County. These violations indicate contaminant levels that may pose direct risks to human health.
Violation Breakdown
| Violation Type | Count | Percentage |
|---|---|---|
| Health-based | 33 | 10.4% |
| Monitoring/Reporting | 283 | 89.6% |
| Total | 316 | 100% |
Health-based violations indicate contaminant levels exceeding EPA Maximum Contaminant Levels (MCLs). Monitoring violations indicate failures to test or report.
Cities with Most Violations
| Rank | City | Violations | Health-Based | ZIP Codes | Population |
|---|---|---|---|---|---|
| 1 | Saint Clairsville | 55 | 5 | 1 | 16,422 |
| 2 | Flushing | 41 | 4 | 1 | 2,576 |
| 3 | Martins Ferry | 34 | 4 | 1 | 7,918 |
| 4 | Bridgeport | 34 | 4 | 1 | 5,852 |
| 5 | Belmont | 32 | 4 | 1 | 2,810 |
| 6 | Yorkville | 29 | 2 | 1 | 1,015 |
| 7 | Bellaire | 24 | 4 | 1 | 7,888 |
| 8 | Piedmont | 20 | 1 | 1 | 651 |
| 9 | Barton | 19 | 3 | 1 | 645 |
| 10 | Bethesda | 11 | 1 | 1 | 2,471 |
Most Common Contaminants
| Contaminant | Category | Violations | ZIPs Affected | Health-Based |
|---|---|---|---|---|
| Surface Water Treatment Rule | Treatment Technique | 86 | 14 | No |
| Lead and Copper Rule | Treatment Technique | 47 | 11 | No |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 37 | 10 | Yes |
| Haloacetic Acids (HAA5) | Disinfection Byproducts | 37 | 10 | No |
| Stage 2 DBP Rule | Treatment Technique | 31 | 11 | Yes |
| Fecal Coliform | Microbiological | 14 | 7 | Yes |
| Stage 1 DBP Rule | Treatment Technique | 8 | 6 | No |
| Revised Total Coliform Rule | Microbiological | 7 | 7 | No |
| E. coli | Microbiological | 2 | 2 | No |
Water Data and the Home Safety Score
This page reports EPA water-system facts without converting the broader Home Safety Score into a drinking-water grade. The county Home Safety grade (D) is a separate multi-source index that also requires PFAS screening, radon, and annual air-quality evidence. Check each ZIP report for the versioned score and its component coverage.
Water Systems in Belmont County
Belmont County is served by 18 community water systems, averaging 0.7 systems per ZIP code. Each system is independently regulated and tested by the EPA. Larger systems serving more people typically have more extensive monitoring requirements.
Water systems in Belmont County source water from a mix of surface water (rivers, reservoirs) and groundwater (wells, aquifers). Source type affects which contaminants are most likely to be detected.
How to Check Your Water in Belmont County
Enter your ZIP code on ZipCheckup for detailed water-system data including contaminant levels and violation history; the Home Safety Score is shown separately with its model version
Request your CCR — every water utility must provide an annual Consumer Confidence Report
Get a home test — certified kits ($20-$50) or professional lab tests ($150-$400) can detect contaminants not covered by routine testing
Consider filtration — NSF-certified filters can address specific contaminants found in your area
Check for lead — homes built before 1986 should test for lead regardless of utility compliance
EPA Enforcement
The EPA and state regulators have taken 122 enforcement actions against water systems in Belmont County. Enforcement actions range from compliance assistance and administrative orders to formal penalties. Systems under enforcement are required to remediate violations and may face ongoing monitoring requirements.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Enforcement: EPA ECHO
Source publication schedules vary. See the page source and verification fields for available timing evidence.
Water Quality by ZIP Code in Belmont County
Water quality varies across Belmont County's 14 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | City | Violations | Health | |
|---|---|---|---|---|
| 43950 | Saint Clairsville | 55 | 5 | View → |
| 43977 | Flushing | 41 | 4 | View → |
| 43912 | Bridgeport | 34 | 4 | View → |
| 43935 | Martins Ferry | 34 | 4 | View → |
| 43718 | Belmont | 32 | 4 | View → |
| 43971 | Yorkville | 29 | 2 | View → |
| 43906 | Bellaire | 24 | 4 | View → |
| 43983 | Piedmont | 20 | 1 | View → |
| 43905 | Barton | 19 | 3 | View → |
| 43719 | Bethesda | 11 | 1 | View → |
| 43947 | Shadyside | 9 | 1 | View → |
| 43713 | Barnesville | 6 | 0 | View → |
| 43933 | Jacobsburg | 1 | 0 | View → |
| 43942 | Powhatan Point | 1 | 0 | View → |
What are EPA health violations?
Health-based violations mean a contaminant was detected above the EPA's Maximum Contaminant Level (MCL) - the legal limit designed to protect human health. Belmont County has 33 such violations. Not all violations cause illness, but repeated exceedances increase risk, especially for children and immunocompromised individuals.
Water facts and the Home Safety Score
The score shown here is the broader Home Safety Score, not a water-quality grade. Model 4.0.0 combines EPA SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, PFAS screening, radon zones, and annual air-quality evidence. Belmont County has a score of 49/100 (Grade D) across 12 scored of 27 tracked ZIP records.
Not sure if your water needs a filter?
Our free tool matches your ZIP code data to the right filtration system - based on actual contaminants detected in your area.
Find the Right Filter →Frequently Asked Questions
Is the tap water safe in Belmont County, Ohio?
Belmont County has 18 community water systems with 316 recorded EPA violations, including 33 health-based. Water quality varies by ZIP code - check your specific location for detailed results.
How many water violations does Belmont County have?
Belmont County has 316 total EPA violations across 14 directly mapped ZIP records. 33 are health-based.
Which city in Belmont County has the most water violations?
Saint Clairsville has the most violations in Belmont County with 55 recorded EPA violations across 1 ZIP code.
What contaminants are found in Belmont County water?
Belmont County water systems are monitored for over 90 EPA-regulated contaminants including lead, copper, nitrates, disinfection byproducts, and bacteria. Check your ZIP code for contaminant-specific data.
How can I test my water in Belmont County?
Contact your local water utility for free or low-cost testing. You can also use a certified home test kit ($20-$50) or hire a certified lab ($150-$400).