WATER QUALITY MO 6 HEALTH VIOLATIONS

Platte County Water Quality: 100 Violations (MO)

17 water systems · 13 ZIP codes · Home Safety Score Unavailable · 0 of 16 tracked ZIP records scored · Updated

Data: EPA Safe Drinking Water Information System (SDWIS), EPA ECHO Last verified:

Unavailable
Home Safety Score
17
Water Systems
100
Total Violations
6
Health-Based
13
ZIP Codes
90
Enforcement Actions

Violation Trend

EPA violations across water systems in Platte County.

2022
2023
Health-based Other violations

Concerned about water quality in Platte County?

Get connected with a certified testing service.

Find the Right Filter →

Water Quality Overview

Platte County has 17 community water systems across 13 directly mapped ZIP records. The systems report serving approximately 614,668 people. The available records contain 100 EPA violations, including 6 health-based violations.

Health-based violations account for 6% of all violations in Platte County. These violations indicate contaminant levels that may pose direct risks to human health.

Violation Breakdown

Violation Type Count Percentage
Health-based 6 6.0%
Monitoring/Reporting 94 94.0%
Total 100 100%

Health-based violations indicate contaminant levels exceeding EPA Maximum Contaminant Levels (MCLs). Monitoring violations indicate failures to test or report.

Cities with Most Violations

Rank City Violations Health-Based ZIP Codes Population
1 Kansas City 36 0 6 81,298
2 Platte City 19 2 1 14,092
3 Weston 18 1 1 3,300
4 Dearborn 8 1 1 1,535
5 Edgerton 8 1 1 1,300
6 Camden Point 8 1 1 1,104
7 Riverside 3 0 1 4,294

Violation Trend

Year-by-year EPA violations across water systems in Platte County:

Year Total Health-Based
2022 2 2
2023 4 4

Most Common Contaminants

Contaminant Category Violations ZIPs Affected Health-Based
Stage 1 DBP Rule Treatment Technique 32 12 No
Stage 2 DBP Rule Treatment Technique 16 7 No
Haloacetic Acids (HAA5) Disinfection Byproducts 11 5 Yes
Total Trihalomethanes (TTHM) Disinfection Byproducts 9 5 No
Surface Water Treatment Rule Treatment Technique 9 7 No
Lead and Copper Rule Treatment Technique 6 5 No

Water Data and the Home Safety Score

This page reports EPA water-system facts without converting the broader Home Safety Score into a drinking-water grade. The county Home Safety grade (unavailable) is a separate multi-source index that also requires PFAS screening, radon, and annual air-quality evidence. Check each ZIP report for the versioned score and its component coverage.

Water Systems in Platte County

Platte County is served by 17 community water systems, averaging 1.1 systems per ZIP code. Each system is independently regulated and tested by the EPA. Larger systems serving more people typically have more extensive monitoring requirements.

Water systems in Platte County source water from a mix of surface water (rivers, reservoirs) and groundwater (wells, aquifers). Source type affects which contaminants are most likely to be detected.

How to Check Your Water in Platte County

  1. Enter your ZIP code on ZipCheckup for detailed water-system data including contaminant levels and violation history; the Home Safety Score is shown separately with its model version

  2. Request your CCR — every water utility must provide an annual Consumer Confidence Report

  3. Get a home test — certified kits ($20-$50) or professional lab tests ($150-$400) can detect contaminants not covered by routine testing

  4. Consider filtration — NSF-certified filters can address specific contaminants found in your area

  5. Check for lead — homes built before 1986 should test for lead regardless of utility compliance

EPA Enforcement

The EPA and state regulators have taken 90 enforcement actions against water systems in Platte County. Enforcement actions range from compliance assistance and administrative orders to formal penalties. Systems under enforcement are required to remediate violations and may face ongoing monitoring requirements.

Data Sources

Source publication schedules vary. See the page source and verification fields for available timing evidence.

Water Quality by ZIP Code in Platte County

Water quality varies across Platte County's 13 ZIP codes. Check your specific ZIP for detailed contaminant data.

ZIP Code City Violations Health
64079 Platte City 19 2 View →
64098 Weston 18 1 View →
64152 Kansas City 10 0 View →
64018 Camden Point 8 1 View →
64439 Dearborn 8 1 View →
64444 Edgerton 8 1 View →
64151 Kansas City 7 0 View →
64154 Kansas City 7 0 View →
64153 Kansas City 6 0 View →
64150 Riverside 3 0 View →
64163 Kansas City 3 0 View →
64164 Kansas City 3 0 View →
64092 Waldron 0 0 View →

What are EPA health violations?

Health-based violations mean a contaminant was detected above the EPA's Maximum Contaminant Level (MCL) - the legal limit designed to protect human health. Platte County has 6 such violations. Not all violations cause illness, but repeated exceedances increase risk, especially for children and immunocompromised individuals.

Water facts and the Home Safety Score

This page reports water evidence separately. A broader Home Safety Score is not published here unless the versioned model identity and complete required component coverage are available.

Not sure if your water needs a filter?

Our free tool matches your ZIP code data to the right filtration system - based on actual contaminants detected in your area.

Find the Right Filter →

Frequently Asked Questions

Is the tap water safe in Platte County, Missouri?

Platte County has 17 community water systems with 100 recorded EPA violations, including 6 health-based. Water quality varies by ZIP code - check your specific location for detailed results.

How many water violations does Platte County have?

Platte County has 100 total EPA violations across 13 directly mapped ZIP records. 6 are health-based.

Which city in Platte County has the most water violations?

Kansas City has the most violations in Platte County with 36 recorded EPA violations across 6 ZIP codes.

What contaminants are found in Platte County water?

Platte County water systems are monitored for over 90 EPA-regulated contaminants including lead, copper, nitrates, disinfection byproducts, and bacteria. Check your ZIP code for contaminant-specific data.

How can I test my water in Platte County?

Contact your local water utility for free or low-cost testing. You can also use a certified home test kit ($20-$50) or hire a certified lab ($150-$400).

Get safety alerts for Platte, Missouri

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.