INFRASTRUCTURE WA

Water Infrastructure in Kent, WA: 25/100 Stress Indicator

Modeled stress 25% · moderate · 13 water systems · Updated

Kent's heuristic infrastructure stress indicator is in the moderate model band.

Data: EPA ECHO, Census ACS, NTSB Last verified:

25%
Stress Indicator
moderate
Modeled Stress Level
15
CO/Gas Incidents
1984
Median Build Year
13
Water Systems
7
ZIP Codes

What is the infrastructure stress indicator?

The infrastructure stress indicator is a heuristic 0-100 composite of housing age, state funding need, violation history, and lead evidence. It is not a probability, measured pipe condition, or forecast of breaks, pressure loss, or contamination. Kent's average indicator is 25/100.

What are CO/gas incidents?

Carbon monoxide (CO) and gas incidents tracked by the NTSB include pipeline failures, gas leaks, and CO exposure events. CO is odorless and can be fatal - the CDC reports about 420 deaths annually from unintentional CO poisoning. Every home should have working CO detectors on each floor, tested monthly. Kent has 15 recorded incidents in the NTSB database.

Infrastructure Risk Distribution

How Kent's 7 ZIP codes are distributed by infrastructure risk level:

Low 0 ZIPs
Moderate 7 ZIPs
High 0 ZIPs
Very High 0 ZIPs

Infrastructure Risk Overview

Kent, Washington has a moderate modeled infrastructure stress level with an average heuristic indicator of 25/100. The result summarizes model inputs and does not predict service outcomes.

The infrastructure stress indicator combines source inputs for housing age, funding need, violation history, and lead evidence. It does not measure the likelihood of pipe failure, water-main breaks, or system degradation.

Key Infrastructure Metrics

Metric Value
Stress indicator 25/100
Modeled stress level moderate
Water systems 13
Median build year 1984
Pre-1986 housing 52%
CO/gas incidents 15
ZIP codes 7
Population 168,134

Infrastructure Risk Distribution

How Kent's 7 ZIP codes are distributed by infrastructure risk level:

Risk Level ZIP Codes Percentage
Low 0 0%
Moderate 7 100%
High 0 0%
Very High 0 0%

Water System Age and Pipe Materials

The median home in Kent was built in 1984 (approximately 42 years old). Housing age is one of the strongest proxies for water infrastructure age, as service lines and interior plumbing were typically installed during construction.

Pipe material risks by era:

Era Common Pipe Material Expected Lifespan Key Risk
Pre-1940 Lead, cast iron 50-75 years Lead contamination, corrosion
1940-1960 Galvanized steel, cast iron 40-60 years Rust, lead solder, reduced flow
1960-1980 Copper, galvanized steel 50-70 years Lead solder (pre-1986), pinhole leaks
1980-2000 Copper, PVC, CPVC 25-50 years Chlorine degradation of plastics
2000+ PEX, copper, CPVC 25-50+ years Generally low risk

With 52% of Kent's homes built before 1986, a significant portion of residential plumbing may contain lead solder or aging pipe materials.

Carbon Monoxide & Gas Safety

15 CO/gas incidents have been recorded in the county covering Kent. The average CO risk score is 10 out of 100.

Carbon monoxide is odorless and colorless - it is the leading cause of poisoning deaths in the U.S. Risk factors include:

  • Gas furnaces, water heaters, and stoves
  • Attached garages
  • Blocked chimneys or vents
  • Portable generators used indoors

Prevention:

  • Install CO detectors on every level, especially near bedrooms
  • Have gas appliances inspected annually
  • Never run generators, grills, or cars in enclosed spaces
  • Replace CO detectors every 5-7 years

What Homeowners Can Do

Pipe Inspection

  • Hire a licensed plumber to inspect your service line and interior plumbing
  • Check for discolored water (brown/orange = rust; white/cloudy = air or sediment)
  • Test water pressure - low pressure may indicate buildup in aging pipes
  • Look for visible corrosion on exposed pipes in basement or utility areas

Water Heater Maintenance

  • Flush your water heater annually to remove sediment
  • Check the anode rod every 2-3 years (prevents tank corrosion)
  • Set temperature to 120F to prevent scalding and reduce energy use
  • Replace water heaters older than 10-15 years proactively

CO Detector Placement

  • One detector per floor, minimum
  • Within 10 feet of each bedroom door
  • Near attached garage and utility room
  • 5 feet above the floor (CO rises with warm air) or on the ceiling
  • Not near windows, doors, or HVAC vents (air movement causes false readings)

Kent vs. Nearby Washington Cities

How Kent's infrastructure compares to nearby cities:

City Water Systems Violations Population
Kent 13 11 168,134
Everett 7 8 172,103
Puyallup 11 15 159,553
Renton 11 5 157,493

ZIP Codes in Kent

Kent covers 7 ZIP codes served by 13 water systems. Infrastructure condition varies by ZIP code based on housing age, pipe material, and water system maintenance. Check your specific ZIP code for localized data.

Data Sources

  • Water systems: EPA ECHO - Enforcement and Compliance History Online
  • Infrastructure risk: Derived model (housing age, violation history, system assessments)
  • Housing age: U.S. Census Bureau American Community Survey (ACS)
  • CO/gas incidents: NTSB, PHMSA pipeline incident reports

Source reporting periods vary. See each cited source for its publication schedule.

Water Quality Map: Kent, WA

Each dot represents a ZIP code. Color indicates water quality grade. Tap a dot for details.

A B C D F

Infrastructure Risk by ZIP Code in Kent

Infrastructure risk varies across Kent's 7 ZIP codes based on system age, pipe materials, and violation history.

ZIP Code Grade Score Violations
98042 B 82/100 5 View report →
98031 A 98/100 6 View report →
98030 A 99/100 6 View report →
98032 A 99/100 2 View report →
98035 N/A /100 0 View report →
98064 N/A /100 0 View report →
98089 N/A /100 0 View report →

Check your water system's infrastructure

Infrastructure risk varies by ZIP code and water system. Enter your ZIP for a personalized infrastructure assessment.

Check Your Infrastructure Risk

Frequently Asked Questions

How old are the pipes in Kent?
The median home build year in Kent is 1984, making typical plumbing infrastructure about 42 years old. Pipes older than 40-50 years have elevated risk of corrosion, leaks, and lead contamination.
Is Kent's water infrastructure safe?
The heuristic infrastructure stress indicator is 25/100, in the moderate model band.
Is there CO or gas leak risk in Kent?
Kent has recorded 15 CO/gas incidents from NTSB data. Homes in the area should have working CO detectors and regular gas line inspections.
What is the infrastructure stress indicator for Kent?
The average heuristic infrastructure stress indicator for Kent is 25/100. It combines model inputs and does not estimate the likelihood of pipe deterioration.
How many water systems serve Kent?
Kent is served by 13 public water systems across 7 ZIP codes. Multiple systems mean water quality and infrastructure condition can vary by neighborhood.
HomeCitiesWashingtonKent, WA → Infrastructure

Get safety alerts for Kent, Washington

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.