Water Quality in Bellevue, WA: No Violations — Grade B
Grade B · Score 84/100 · 1 water system · Updated 2026-05-03
Bellevue's water is mostly safe. Minor violations exist but are primarily monitoring-related.
Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03
When EPA compliance data is reviewed for Bellevue, WA, the result holds consistent: zero violations documented across 1 tracked water system, with every health-based limit and monitoring requirement met through the full dataset available in SDWIS.
Water Quality Map: Bellevue, WA
Each dot represents a ZIP code. Color indicates water quality grade. Tap a dot for details.
Water Quality by ZIP Code in Bellevue
Water quality varies across Bellevue's 7 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | Grade | Score | Violations | Health | |
|---|---|---|---|---|---|
| 98004 | B | 82 | 0 | 0 | View report → |
| 98006 | B | 82 | 0 | 0 | View report → |
| 98007 | B | 82 | 0 | 0 | View report → |
| 98008 | B | 82 | 0 | 0 | View report → |
| 98005 | A | 87 | 0 | 0 | View report → |
| 98009 | A | 88 | 0 | 0 | View report → |
| 98015 | A | 88 | 0 | 0 | View report → |
Water Quality Overview
Bellevue, Washington receives a water quality grade of B with an overall score of 84 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).
No EPA violations have been recorded for the 1 water system serving Bellevue. This is a positive indicator, though it does not guarantee the absence of all contaminants — some substances (like PFAS) are not yet fully regulated.
What Grade B Means
A grade of B indicates good compliance with EPA drinking water standards. While not perfect, Bellevue's water systems meet the vast majority of federal requirements. Minor violations may exist but typically relate to monitoring or reporting rather than health-based standards.
Lead Levels
Lead testing data for Bellevue is currently being collected. The EPA requires all community water systems to test for lead under the Lead and Copper Rule.
With 62% of homes built before 1986, Bellevue has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.
Water Systems Serving Bellevue
Bellevue is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 317,330 people across 7 ZIP codes.
Each water system is identified by a Public Water System ID (PWSID) and is required to:
- Test for over 90 regulated contaminants on a regular schedule
- Report results to the EPA and state regulators
- Issue an annual Consumer Confidence Report (CCR) to all customers
- Take corrective action when violations occur
How to Check Your Water in Bellevue
Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores
Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants
Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel
Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics
Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts
Bellevue vs. Nearby Washington Cities
How Bellevue's water quality compares to similar cities in Washington:
| City | Grade | Violations | Systems | Population |
|---|---|---|---|---|
| Bellevue | B | 0 | 1 | 317,330 |
| Medina | B | 0 | 1 | 317,330 |
| Airway Heights | D | 0 | 1 | 343,167 |
| Nine Mile Falls | D | 0 | 1 | 343,167 |
Recommended Water Filters for Bellevue
Based on contaminants detected in Bellevue's water supply, these filter types are recommended:
Granular Activated Carbon (GAC, under-sink or whole-house)
- Removes: Haloacetic Acid HAA5
- Effectiveness: 60-80%
- Cost range: $100–$600
- Certification: NSF/ANSI 53
- Recommended products:
Water Quality by ZIP Code in Bellevue
Water quality varies across Bellevue's ZIP codes. The table below shows the worst-scoring and best-scoring areas:
| ZIP Code | Score | Grade | Violations | Health-Based |
|---|---|---|---|---|
| 98004 | 82 | B | 0 | 0 |
| 98006 | 82 | B | 0 | 0 |
| 98007 | 82 | B | 0 | 0 |
| 98008 | 82 | B | 0 | 0 |
| 98005 | 87 | A | 0 | 0 |
| 98009 | 88 | A | 0 | 0 |
| 98015 | 88 | A | 0 | 0 |
Common Questions About Bellevue Water
These are the most common questions residents search for about water quality in Bellevue, Washington:
Is Bellevue water hard or soft? Water hardness varies by source. Bellevue's 1 water system uses a single source. Check your ZIP code report for specific hardness data.
Can I drink Bellevue tap water? Bellevue's water receives a grade of B (84/100). No health-based violations have been recorded, but home testing is always recommended.
What is the best water filter for Bellevue? Based on detected contaminants, a granular activated carbon (gac, under-sink or whole-house) filter is most recommended. See our Water Filter Matcher for personalized recommendations.
Bellevue vs. Washington Average
Understanding how Bellevue compares to the broader Washington average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.
To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Bellevue.
ZIP Codes in Bellevue
Bellevue spans 7 ZIP codes. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
- Enforcement: EPA ECHO database
- Filter recommendations: NSF/ANSI certified products
Updated daily.
Frequently Asked Questions
Your Water is Safe — Here's How to Keep It That Way
Grade B is excellent news. Here's what proactive homeowners do to maintain water quality:
Annual Water Testing
EPA recommends annual testing even with clean water. Home test kits: $20-$50. Catches changes before they become problems.
Maintenance Filtration
A basic carbon filter removes chlorine taste and catches emerging contaminants like PFAS that aren't yet fully regulated.
Plumbing Check
Even safe city water picks up lead from home pipes. If your home was built before 1986, a one-time pipe inspection is recommended.