Water Quality in Valley Mills, TX: 22 Violations — Grade B
Grade B · Score 77/100 · 4 water systems · Updated 2026-05-03
Valley Mills's water is mostly safe. Minor violations exist but are primarily monitoring-related.
Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03
The public EPA compliance record for Valley Mills, TX holds 22 documented water violations — sourced from the federal Safe Drinking Water Information System, which tracks every reportable event for registered public water systems in the state.
Water Quality by ZIP Code in Valley Mills
Water quality varies across Valley Mills's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | Grade | Score | Violations | Health | |
|---|---|---|---|---|---|
| 76689 | B | 77 | 22 | 2 | View report → |
Water Quality Overview
Valley Mills, Texas receives a water quality grade of B with an overall score of 77 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).
The 4 water systems serving Valley Mills have accumulated 22 EPA violations, including 2 health-based violations. These violations are tracked across 1 ZIP codes serving approximately 2,929 people.
What Grade B Means
A grade of B indicates good compliance with EPA drinking water standards. While not perfect, Valley Mills's water systems meet the vast majority of federal requirements. Minor violations may exist but typically relate to monitoring or reporting rather than health-based standards.
Lead Levels
Lead testing data for Valley Mills is currently being collected. The EPA requires all community water systems to test for lead under the Lead and Copper Rule.
With 50% of homes built before 1986, Valley Mills has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.
Water Systems Serving Valley Mills
Valley Mills is served by 4 community water systems regulated under the Safe Drinking Water Act. These systems collectively serve approximately 2,929 people across 1 ZIP codes.
Each water system is identified by a Public Water System ID (PWSID) and is required to:
- Test for over 90 regulated contaminants on a regular schedule
- Report results to the EPA and state regulators
- Issue an annual Consumer Confidence Report (CCR) to all customers
- Take corrective action when violations occur
The EPA has taken 10 enforcement actions against water systems serving Valley Mills. Enforcement actions range from informal compliance assistance to formal orders and penalties.
How to Check Your Water in Valley Mills
Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores
Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants
Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel
Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics
Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts
Contaminants Detected in Valley Mills Water Systems
The following contaminants have been detected or caused violations across Valley Mills's water systems:
| Contaminant | Category | MCL | Violations | ZIPs Affected | Health-Based |
|---|---|---|---|---|---|
| Stage 1 DBP Rule | Treatment Technique | N/A | 6 | 1 | No |
| Lead and Copper Rule | Treatment Technique | N/A | 6 | 1 | No |
| Stage 2 DBP Rule | Treatment Technique | N/A | 4 | 1 | Yes |
| Revised Total Coliform Rule | Microbiological | N/A | 2 | 1 | No |
| Surface Water Treatment Rule | Treatment Technique | N/A | 2 | 1 | No |
| Total Coliform | Microbiological | N/A | 1 | 1 | No |
MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.
EPA Enforcement History
The EPA and state regulators have taken 10 enforcement actions against water systems serving Valley Mills. Recent actions:
| Date | Action Type |
|---|---|
| 2025-08-07 | State Order Extension |
| 2025-06-16 | State Informal Action |
| 2025-05-28 | State Informal Action |
| 2025-04-30 | State Informal Action |
| 2025-04-22 | State Order Extension |
| 2025-04-14 | State Informal Action |
| 2025-04-14 | State Informal Enforcement |
| 2025-04-09 | State Informal Action |
| 2025-03-31 | State Informal Action |
| 2025-03-31 | State Informal Enforcement |
Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2025-08-07.
Valley Mills vs. Nearby Texas Cities
How Valley Mills's water quality compares to similar cities in Texas:
| City | Grade | Violations | Systems | Population |
|---|---|---|---|---|
| Valley Mills | B | 22 | 4 | 2,929 |
| Pottsboro | B | 37 | 3 | 2,928 |
| Freer | C | 14 | 1 | 2,923 |
| Jonesville | C | 0 | 1 | 2,923 |
Common Questions About Valley Mills Water
These are the most common questions residents search for about water quality in Valley Mills, Texas:
Is Valley Mills water hard or soft? Water hardness varies by source. Valley Mills's 4 water systems use multiple sources. Check your ZIP code report for specific hardness data.
Can I drink Valley Mills tap water? Valley Mills's water receives a grade of B (77/100). There are 2 health-based violations — consider filtration.
What is the best water filter for Valley Mills? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.
Valley Mills vs. Texas Average
Understanding how Valley Mills compares to the broader Texas average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.
To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Valley Mills.
ZIP Codes in Valley Mills
Valley Mills spans 1 ZIP code. The ZIP with the lowest water quality score is 76689. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
- Enforcement: EPA ECHO database
- Filter recommendations: NSF/ANSI certified products
Updated daily.
Frequently Asked Questions
Your Water is Safe — Here's How to Keep It That Way
Grade B is excellent news. Here's what proactive homeowners do to maintain water quality:
Annual Water Testing
EPA recommends annual testing even with clean water. Home test kits: $20-$50. Catches changes before they become problems.
Maintenance Filtration
A basic carbon filter removes chlorine taste and catches emerging contaminants like PFAS that aren't yet fully regulated.
Plumbing Check
Even safe city water picks up lead from home pipes. If your home was built before 1986, a one-time pipe inspection is recommended.