Water Quality in Sherman, TX: 12 Violations — Grade B
Grade B · Score 80/100 · 2 water systems · Updated 2026-05-03
Sherman's water is mostly safe. Minor violations exist but are primarily monitoring-related.
Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03
Looking at EPA compliance data for Sherman, TX, the record shows 12 violations — findings that span health-based exceedances, monitoring lapses, and enforcement events tied to local utilities in the SDWIS database.
Water Quality by ZIP Code in Sherman
Water quality varies across Sherman's 3 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | Grade | Score | Violations | Health | |
|---|---|---|---|---|---|
| 75090 | B | 75 | 4 | 0 | View report → |
| 75092 | B | 75 | 4 | 0 | View report → |
| 75091 | A | 90 | 4 | 0 | View report → |
Water Quality Overview
Sherman, Texas receives a water quality grade of B with an overall score of 80 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).
The 2 water systems serving Sherman have accumulated 12 EPA violations (all monitoring/reporting type). These violations are tracked across 3 ZIP codes serving approximately 47,845 people.
What Grade B Means
A grade of B indicates good compliance with EPA drinking water standards. While not perfect, Sherman's water systems meet the vast majority of federal requirements. Minor violations may exist but typically relate to monitoring or reporting rather than health-based standards.
Lead Levels
The average 90th percentile lead level across Sherman water systems is 0.0008 mg/L — within EPA limits. No ZIP codes exceed the EPA lead action level.
With 60% of homes built before 1986, Sherman has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.
Water Systems Serving Sherman
Sherman is served by 2 community water systems regulated under the Safe Drinking Water Act. These systems collectively serve approximately 47,845 people across 3 ZIP codes.
Each water system is identified by a Public Water System ID (PWSID) and is required to:
- Test for over 90 regulated contaminants on a regular schedule
- Report results to the EPA and state regulators
- Issue an annual Consumer Confidence Report (CCR) to all customers
- Take corrective action when violations occur
The EPA has taken 15 enforcement actions against water systems serving Sherman. Enforcement actions range from informal compliance assistance to formal orders and penalties.
How to Check Your Water in Sherman
Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores
Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants
Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel
Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics
Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts
Contaminants Detected in Sherman Water Systems
The following contaminants have been detected or caused violations across Sherman's water systems:
| Contaminant | Category | MCL | Violations | ZIPs Affected | Health-Based |
|---|---|---|---|---|---|
| E. coli | Microbiological | N/A | 3 | 3 | No |
| Fecal Coliform | Microbiological | N/A | 3 | 3 | No |
| Total Organic Carbon | Disinfection Byproducts | N/A | 3 | 3 | No |
MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.
EPA Enforcement History
The EPA and state regulators have taken 5 enforcement actions against water systems serving Sherman. Recent actions:
| Date | Action Type |
|---|---|
| 2021-06-24 | State Informal Action |
| 2021-06-16 | State Informal Action |
| 2021-05-10 | State Informal Action |
| 2021-05-10 | State Informal Enforcement |
| 2021-04-01 | State Order Extension |
Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2021-06-24.
Sherman vs. Nearby Texas Cities
How Sherman's water quality compares to similar cities in Texas:
| City | Grade | Violations | Systems | Population |
|---|---|---|---|---|
| Sherman | B | 12 | 2 | 47,845 |
| Port Isabel | B | 0 | 1 | 46,341 |
| South Padre Island | D | 0 | 1 | 46,341 |
| Keller | A | 0 | 1 | 46,308 |
Water Quality by ZIP Code in Sherman
Water quality varies across Sherman's ZIP codes. The table below shows the worst-scoring and best-scoring areas:
Common Questions About Sherman Water
These are the most common questions residents search for about water quality in Sherman, Texas:
Is Sherman water hard or soft? Water hardness varies by source. Sherman's 2 water systems use multiple sources. Check your ZIP code report for specific hardness data.
Can I drink Sherman tap water? Sherman's water receives a grade of B (80/100). No health-based violations have been recorded, but home testing is always recommended.
What is the best water filter for Sherman? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.
Sherman vs. Texas Average
Understanding how Sherman compares to the broader Texas average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.
To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Sherman.
ZIP Codes in Sherman
Sherman spans 3 ZIP codes. The ZIP with the lowest water quality score is 75090. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
- Enforcement: EPA ECHO database
- Filter recommendations: NSF/ANSI certified products
Updated daily.
Frequently Asked Questions
Your Water is Safe — Here's How to Keep It That Way
Grade B is excellent news. Here's what proactive homeowners do to maintain water quality:
Annual Water Testing
EPA recommends annual testing even with clean water. Home test kits: $20-$50. Catches changes before they become problems.
Maintenance Filtration
A basic carbon filter removes chlorine taste and catches emerging contaminants like PFAS that aren't yet fully regulated.
Plumbing Check
Even safe city water picks up lead from home pipes. If your home was built before 1986, a one-time pipe inspection is recommended.