INFRASTRUCTURE TX

Water Infrastructure in Katy, TX: 20/100 Stress Indicator

Modeled stress 20% · low · 20 water systems · Updated

Katy's heuristic infrastructure stress indicator is in the low model band. This is not a measured condition or failure forecast.

Data: EPA ECHO, Census ACS, NTSB Last verified:

20%
Stress Indicator
low
Modeled Stress Level
38
CO/Gas Incidents
2009
Median Build Year
20
Water Systems
6
ZIP Codes

What is the infrastructure stress indicator?

The infrastructure stress indicator is a heuristic 0-100 composite of housing age, state funding need, violation history, and lead evidence. It is not a probability, measured pipe condition, or forecast of breaks, pressure loss, or contamination. Katy's average indicator is 20/100.

What are CO/gas incidents?

Carbon monoxide (CO) and gas incidents tracked by the NTSB include pipeline failures, gas leaks, and CO exposure events. CO is odorless and can be fatal - the CDC reports about 420 deaths annually from unintentional CO poisoning. Every home should have working CO detectors on each floor, tested monthly. Katy has 38 recorded incidents in the NTSB database.

Infrastructure Risk Distribution

How Katy's 6 ZIP codes are distributed by infrastructure risk level:

Low 3 ZIPs
Moderate 3 ZIPs
High 0 ZIPs
Very High 0 ZIPs

Infrastructure Risk Overview

Katy, Texas has a low modeled infrastructure stress level with an average heuristic indicator of 20/100. This is not a measured condition or failure forecast.

The infrastructure stress indicator combines source inputs for housing age, funding need, violation history, and lead evidence. It does not measure the likelihood of pipe failure, water-main breaks, or system degradation.

Key Infrastructure Metrics

Metric Value
Stress indicator 20/100
Modeled stress level low
Water systems 20
Median build year 2009
Pre-1986 housing 16%
CO/gas incidents 38
ZIP codes 6
Population 395,745

Infrastructure Risk Distribution

How Katy's 6 ZIP codes are distributed by infrastructure risk level:

Risk Level ZIP Codes Percentage
Low 3 50%
Moderate 3 50%
High 0 0%
Very High 0 0%

Water System Age and Pipe Materials

The median home in Katy was built in 2009 (approximately 17 years old). Housing age is one of the strongest proxies for water infrastructure age, as service lines and interior plumbing were typically installed during construction.

Pipe material risks by era:

Era Common Pipe Material Expected Lifespan Key Risk
Pre-1940 Lead, cast iron 50-75 years Lead contamination, corrosion
1940-1960 Galvanized steel, cast iron 40-60 years Rust, lead solder, reduced flow
1960-1980 Copper, galvanized steel 50-70 years Lead solder (pre-1986), pinhole leaks
1980-2000 Copper, PVC, CPVC 25-50 years Chlorine degradation of plastics
2000+ PEX, copper, CPVC 25-50+ years Generally low risk

Carbon Monoxide & Gas Safety

38 CO/gas incidents have been recorded in the county covering Katy. The average CO risk score is 11 out of 100.

Carbon monoxide is odorless and colorless - it is the leading cause of poisoning deaths in the U.S. Risk factors include:

  • Gas furnaces, water heaters, and stoves
  • Attached garages
  • Blocked chimneys or vents
  • Portable generators used indoors

Prevention:

  • Install CO detectors on every level, especially near bedrooms
  • Have gas appliances inspected annually
  • Never run generators, grills, or cars in enclosed spaces
  • Replace CO detectors every 5-7 years

What Homeowners Can Do

Pipe Inspection

  • Hire a licensed plumber to inspect your service line and interior plumbing
  • Check for discolored water (brown/orange = rust; white/cloudy = air or sediment)
  • Test water pressure - low pressure may indicate buildup in aging pipes
  • Look for visible corrosion on exposed pipes in basement or utility areas

Water Heater Maintenance

  • Flush your water heater annually to remove sediment
  • Check the anode rod every 2-3 years (prevents tank corrosion)
  • Set temperature to 120F to prevent scalding and reduce energy use
  • Replace water heaters older than 10-15 years proactively

CO Detector Placement

  • One detector per floor, minimum
  • Within 10 feet of each bedroom door
  • Near attached garage and utility room
  • 5 feet above the floor (CO rises with warm air) or on the ceiling
  • Not near windows, doors, or HVAC vents (air movement causes false readings)

Katy vs. Nearby Texas Cities

How Katy's infrastructure compares to nearby cities:

City Water Systems Violations Population
Katy 20 50 395,745
Arlington 7 22 399,411
Spring 36 128 424,945
Corpus Christi 8 40 318,904

ZIP Codes in Katy

Katy covers 6 ZIP codes served by 20 water systems. Infrastructure condition varies by ZIP code based on housing age, pipe material, and water system maintenance. Check your specific ZIP code for localized data.

Data Sources

  • Water systems: EPA ECHO - Enforcement and Compliance History Online
  • Infrastructure risk: Derived model (housing age, violation history, system assessments)
  • Housing age: U.S. Census Bureau American Community Survey (ACS)
  • CO/gas incidents: NTSB, PHMSA pipeline incident reports

Source reporting periods vary. See each cited source for its publication schedule.

Water Quality Map: Katy, TX

Each dot represents a ZIP code. Color indicates water quality grade. Tap a dot for details.

A B C D F

Infrastructure Risk by ZIP Code in Katy

Infrastructure risk varies across Katy's 6 ZIP codes based on system age, pipe materials, and violation history.

ZIP Code Grade Score Violations
77493 A 87/100 14 View report →
77449 N/A /100 24 View report →
77450 N/A /100 2 View report →
77491 N/A /100 0 View report →
77492 N/A /100 0 View report →
77494 N/A /100 23 View report →

Check your water system's infrastructure

Infrastructure risk varies by ZIP code and water system. Enter your ZIP for a personalized infrastructure assessment.

Check Your Infrastructure Risk

Frequently Asked Questions

How old are the pipes in Katy?
The median home build year in Katy is 2009, making typical plumbing infrastructure about 17 years old. Pipes older than 40-50 years have elevated risk of corrosion, leaks, and lead contamination.
Is Katy's water infrastructure safe?
The heuristic infrastructure stress indicator is 20/100, in the low model band. This does not measure maintenance or failure probability.
Is there CO or gas leak risk in Katy?
Katy has recorded 38 CO/gas incidents from NTSB data. Homes in the area should have working CO detectors and regular gas line inspections.
What is the infrastructure stress indicator for Katy?
The average heuristic infrastructure stress indicator for Katy is 20/100. It combines model inputs and does not estimate the likelihood of pipe deterioration.
How many water systems serve Katy?
Katy is served by 20 public water systems across 6 ZIP codes. Multiple systems mean water quality and infrastructure condition can vary by neighborhood.
HomeCitiesTexasKaty, TX → Infrastructure

Get safety alerts for Katy, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.