INFRASTRUCTURE TX

Water Infrastructure in Fort Worth, TX: 31/100 Stress Indicator

Modeled stress 31% · moderate · 37 water systems · Updated

Fort Worth's heuristic infrastructure stress indicator is in the moderate model band.

Data: EPA ECHO, Census ACS, NTSB Last verified:

31%
Stress Indicator
moderate
Modeled Stress Level
19
CO/Gas Incidents
1978
Median Build Year
37
Water Systems
56
ZIP Codes

What is the infrastructure stress indicator?

The infrastructure stress indicator is a heuristic 0-100 composite of housing age, state funding need, violation history, and lead evidence. It is not a probability, measured pipe condition, or forecast of breaks, pressure loss, or contamination. Fort Worth's average indicator is 31/100.

What are CO/gas incidents?

Carbon monoxide (CO) and gas incidents tracked by the NTSB include pipeline failures, gas leaks, and CO exposure events. CO is odorless and can be fatal - the CDC reports about 420 deaths annually from unintentional CO poisoning. Every home should have working CO detectors on each floor, tested monthly. Fort Worth has 19 recorded incidents in the NTSB database.

Infrastructure Risk Distribution

How Fort Worth's 56 ZIP codes are distributed by infrastructure risk level:

Low 2 ZIPs
Moderate 48 ZIPs
High 6 ZIPs
Very High 0 ZIPs

Infrastructure Risk Overview

Fort Worth, Texas has a moderate modeled infrastructure stress level with an average heuristic indicator of 31/100. The result summarizes model inputs and does not predict service outcomes.

The infrastructure stress indicator combines source inputs for housing age, funding need, violation history, and lead evidence. It does not measure the likelihood of pipe failure, water-main breaks, or system degradation.

Key Infrastructure Metrics

Metric Value
Stress indicator 31/100
Modeled stress level moderate
Water systems 37
Median build year 1978
Pre-1986 housing 53%
CO/gas incidents 19
ZIP codes 56
Population 982,017

Infrastructure Risk Distribution

How Fort Worth's 56 ZIP codes are distributed by infrastructure risk level:

Risk Level ZIP Codes Percentage
Low 2 4%
Moderate 48 86%
High 6 11%
Very High 0 0%

11% of Fort Worth's ZIP codes have high or very-high infrastructure risk. Residents in these areas should be especially vigilant about water quality and pipe condition.

Water System Age and Pipe Materials

The median home in Fort Worth was built in 1978 (approximately 48 years old). Housing age is one of the strongest proxies for water infrastructure age, as service lines and interior plumbing were typically installed during construction.

Pipe material risks by era:

Era Common Pipe Material Expected Lifespan Key Risk
Pre-1940 Lead, cast iron 50-75 years Lead contamination, corrosion
1940-1960 Galvanized steel, cast iron 40-60 years Rust, lead solder, reduced flow
1960-1980 Copper, galvanized steel 50-70 years Lead solder (pre-1986), pinhole leaks
1980-2000 Copper, PVC, CPVC 25-50 years Chlorine degradation of plastics
2000+ PEX, copper, CPVC 25-50+ years Generally low risk

With 53% of Fort Worth's homes built before 1986, a significant portion of residential plumbing may contain lead solder or aging pipe materials.

Carbon Monoxide & Gas Safety

19 CO/gas incidents have been recorded in the county covering Fort Worth. The average CO risk score is 21 out of 100.

Carbon monoxide is odorless and colorless - it is the leading cause of poisoning deaths in the U.S. Risk factors include:

  • Gas furnaces, water heaters, and stoves
  • Attached garages
  • Blocked chimneys or vents
  • Portable generators used indoors

Prevention:

  • Install CO detectors on every level, especially near bedrooms
  • Have gas appliances inspected annually
  • Never run generators, grills, or cars in enclosed spaces
  • Replace CO detectors every 5-7 years

What Homeowners Can Do

Pipe Inspection

  • Hire a licensed plumber to inspect your service line and interior plumbing
  • Check for discolored water (brown/orange = rust; white/cloudy = air or sediment)
  • Test water pressure - low pressure may indicate buildup in aging pipes
  • Look for visible corrosion on exposed pipes in basement or utility areas

Water Heater Maintenance

  • Flush your water heater annually to remove sediment
  • Check the anode rod every 2-3 years (prevents tank corrosion)
  • Set temperature to 120F to prevent scalding and reduce energy use
  • Replace water heaters older than 10-15 years proactively

CO Detector Placement

  • One detector per floor, minimum
  • Within 10 feet of each bedroom door
  • Near attached garage and utility room
  • 5 feet above the floor (CO rises with warm air) or on the ceiling
  • Not near windows, doors, or HVAC vents (air movement causes false readings)

Fort Worth vs. Nearby Texas Cities

How Fort Worth's infrastructure compares to nearby cities:

City Water Systems Violations Population
Fort Worth 37 334 982,017
El Paso 11 43 815,636
Austin 46 138 1,157,348
Dallas 18 30 1,372,181

ZIP Codes in Fort Worth

Fort Worth covers 56 ZIP codes served by 37 water systems. Infrastructure condition varies by ZIP code based on housing age, pipe material, and water system maintenance. Check your specific ZIP code for localized data.

Data Sources

  • Water systems: EPA ECHO - Enforcement and Compliance History Online
  • Infrastructure risk: Derived model (housing age, violation history, system assessments)
  • Housing age: U.S. Census Bureau American Community Survey (ACS)
  • CO/gas incidents: NTSB, PHMSA pipeline incident reports

Source reporting periods vary. See each cited source for its publication schedule.

Water Quality Map: Fort Worth, TX

Each dot represents a ZIP code. Color indicates water quality grade. Tap a dot for details.

A B C D F

Infrastructure Risk by ZIP Code in Fort Worth

Infrastructure risk varies across Fort Worth's 56 ZIP codes based on system age, pipe materials, and violation history.

ZIP Code Grade Score Violations
76108 C 58/100 102 View report →
76177 C 58/100 107 View report →
76126 C 60/100 64 View report →
76114 C 65/100 16 View report →
76116 C 65/100 51 View report →
76179 C 66/100 21 View report →
76140 C 67/100 29 View report →
76106 B 70/100 9 View report →
76134 B 71/100 8 View report →
76107 B 73/100 3 View report →
76111 B 73/100 3 View report →
76135 B 73/100 26 View report →
76137 B 73/100 3 View report →
76102 B 74/100 2 View report →
76103 B 74/100 2 View report →
76104 B 74/100 2 View report →
76105 B 74/100 2 View report →
76109 B 74/100 41 View report →
76110 B 74/100 2 View report →
76112 B 74/100 2 View report →

Check your water system's infrastructure

Infrastructure risk varies by ZIP code and water system. Enter your ZIP for a personalized infrastructure assessment.

Check Your Infrastructure Risk

Frequently Asked Questions

How old are the pipes in Fort Worth?
The median home build year in Fort Worth is 1978, making typical plumbing infrastructure about 48 years old. Pipes older than 40-50 years have elevated risk of corrosion, leaks, and lead contamination.
Is Fort Worth's water infrastructure safe?
The heuristic infrastructure stress indicator is 31/100, in the moderate model band.
Is there CO or gas leak risk in Fort Worth?
Fort Worth has recorded 19 CO/gas incidents from NTSB data. Homes in the area should have working CO detectors and regular gas line inspections.
What is the infrastructure stress indicator for Fort Worth?
The average heuristic infrastructure stress indicator for Fort Worth is 31/100. It combines model inputs and does not estimate the likelihood of pipe deterioration.
How many water systems serve Fort Worth?
Fort Worth is served by 37 public water systems across 56 ZIP codes. Multiple systems mean water quality and infrastructure condition can vary by neighborhood.
HomeCitiesTexasFort Worth, TX → Infrastructure

Get safety alerts for Fort Worth, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.