Belton, SC: 6 Violations — 65/100 (2026)
1 ZIP code · 9 water systems · Updated 2026-06-03
Water systems across Belton produce average compliance results for SC overall — pockets with documented violations exist, and the variation between areas makes checking the specific system serving a given address the most useful step for residents here.
How Belton Compares
Data: EPA SDWIS Last verified: 2026-06-03
Belton Water: The Quick Version
- Your city's water systems recorded 6 violations in the past 5 years.
- Average lead level: 0.011 mg/L.
- Homes built before 1986: 57% — older plumbing may contain lead solder.
- Estimated remediation: $3,500 per household.
- CDC health risk index: 13.83 — above typical levels.
Water Systems Serving Belton
3 water utilities share the residential service territory in Belton, SC — out of 9 total systems in federal records.
Overview
We track water quality and home safety data for 1 ZIP code in Belton, South Carolina (population ~16,518), covering 9 community water systems serving approximately 514,047 people region-wide.
1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.
Home Safety Score
Average Home Safety Score for Belton: C (65/100)
The score combines three factors:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| Lead Levels | 90th percentile lead concentration vs EPA action level |
| Radon Risk | EPA radon zone classification |
Water Sources
Belton water systems draw from: Surface water.
Lead & Copper
- Average lead level (90th percentile): 0.0110 mg/L (EPA action level: 0.015 mg/L)
- 0 ZIP codes exceed the EPA lead action level
Radon Risk
Dominant radon zone: Zone 2 (Moderate Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Top Contaminants
| Contaminant | Category | Violations | ZIPs Affected |
|---|---|---|---|
| Consumer Confidence Report Rule | Reporting | 4 | 1 |
| Revised Total Coliform Rule | Microbiological | 4 | 1 |
| E. coli | Microbiological | 4 | 1 |
Areas with Most Violations
| ZIP Code | Safety Score | Violations | Health-Based | System |
|---|---|---|---|---|
| 29627 | C | 6 | 0 | Hammond W/d (sc0420007) |
All ZIP Codes in Belton
- 29627 [C] — 6 violations
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Updated daily.
CDC Health Data for Belton
Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.
Compared to National Average
Vertical line = national average. ■ Above national · ■ Below national
Key Contaminants Detected in Belton
Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.
How Old Is Belton's Housing Stock?
With 57% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
The lead that enters tap water in older homes often comes not from the municipal supply but from the home's own plumbing — from solder used in copper joints before the 1986 federal ban, or from lead pipes installed before 1970. In Belton, where the median build year is 1970, these older materials are widespread. More than half the residential stock predates the 1986 solder ban, and a significant fraction predates 1970 as well. For residents in those homes, the city-wide water quality picture is a less relevant frame than the specific materials inside their own walls and under their own street.
Over half of homes in Belton were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.
Source: U.S. Census Bureau ACS B25034.
Belton: Remediation Cost in Perspective
Cost-to-value data for Belton produces a high remediation-share classification — the equity impact here is elevated, placing this market in the tier where financial preparation is a meaningful factor in how homeowners approach documented issues.
At 2.3% of home value, remediation costs in Belton represent a significant financial burden. For homes valued near the median, fixing water and safety issues could cost $2,200–$5,600. Home values here are 25% below the South Carolina average.
Protecting Children from Lead in Belton
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Wherever 57% of local housing was built before solder rules changed — as is the case in Belton — a faucet-level sample closes the gap that aggregate utility data cannot.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Climate-Related Water Risk for Belton
A moderate NFIP record for Belton — 2 insurance claims paired with 100% of ZIP codes in FEMA flood zones — points to a flood history where water-quality pathways have likely been periodically relevant.
Belton has a moderate flood history with 2 FEMA claims averaging $127,649 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$3,500</strong> remediation cost per household.
Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.
Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.
What You Can Do in Belton
- Test your water at home. City-level data shows averages — your tap may differ. Lead testing is especially recommended given the area's lead levels.
- Install a certified water filter. Filters rated for Consumer Confidence Report Rule can reduce the most common contaminant found in Belton's water.
- Check your home's plumbing. With 57% of homes built before 1986, lead solder is a real possibility.
Deep Dive Reports
Detailed analysis for Belton, SC