INFRASTRUCTURE PA VERY HIGH RISK

Infrastructure Stress in Point Marion, PA: Very High

Modeled stress 67% · very-high · 2 water systems · Updated

Point Marion's modeled infrastructure stress level is very-high. The score summarizes inputs and is not a probability.

Data: EPA ECHO, Census ACS, NTSB Last verified:

67%
Stress Indicator
very-high
Modeled Stress Level
0
CO/Gas Incidents
1949
Median Build Year
2
Water Systems
1
ZIP Codes

What is the infrastructure stress indicator?

The infrastructure stress indicator is a heuristic 0-100 composite of housing age, state funding need, violation history, and lead evidence. It is not a probability, measured pipe condition, or forecast of breaks, pressure loss, or contamination. Point Marion's average indicator is 67/100.

Infrastructure Risk Distribution

Point Marion is covered by a single ZIP code. Its infrastructure risk level:

Low 0 ZIPs
Moderate 0 ZIPs
High 0 ZIPs
Very High 1 ZIP

Infrastructure Risk Overview

Point Marion, Pennsylvania has a very-high modeled infrastructure stress level with an average heuristic indicator of 67/100. It is an evidence summary, not a probability.

The infrastructure stress indicator combines source inputs for housing age, funding need, violation history, and lead evidence. It does not measure the likelihood of pipe failure, water-main breaks, or system degradation.

Key Infrastructure Metrics

Metric Value
Stress indicator 67/100
Modeled stress level very-high
Water systems 2
Median build year 1949
Pre-1986 housing 86%
CO/gas incidents 0
ZIP codes 1
Population 2,399

Infrastructure Risk Distribution

How Point Marion's 1 ZIP code is distributed by infrastructure risk level:

Risk Level ZIP Codes Percentage
Low 0 0%
Moderate 0 0%
High 0 0%
Very High 1 100%

100% of Point Marion's ZIP codes are in the high or very-high modeled stress category. This is a distribution of heuristic inputs, not a failure forecast.

Water System Age and Pipe Materials

The median home in Point Marion was built in 1949 (approximately 77 years old). Housing age is one of the strongest proxies for water infrastructure age, as service lines and interior plumbing were typically installed during construction.

Pipe material risks by era:

Era Common Pipe Material Expected Lifespan Key Risk
Pre-1940 Lead, cast iron 50-75 years Lead contamination, corrosion
1940-1960 Galvanized steel, cast iron 40-60 years Rust, lead solder, reduced flow
1960-1980 Copper, galvanized steel 50-70 years Lead solder (pre-1986), pinhole leaks
1980-2000 Copper, PVC, CPVC 25-50 years Chlorine degradation of plastics
2000+ PEX, copper, CPVC 25-50+ years Generally low risk

With 86% of Point Marion's homes built before 1986, a significant portion of residential plumbing may contain lead solder or aging pipe materials.

Carbon Monoxide & Gas Safety

The available county record contains no CO/gas incidents. The average CO risk score is 0 out of 100.

Carbon monoxide is odorless and colorless - it is the leading cause of poisoning deaths in the U.S. Risk factors include:

  • Gas furnaces, water heaters, and stoves
  • Attached garages
  • Blocked chimneys or vents
  • Portable generators used indoors

Prevention:

  • Install CO detectors on every level, especially near bedrooms
  • Have gas appliances inspected annually
  • Never run generators, grills, or cars in enclosed spaces
  • Replace CO detectors every 5-7 years

What Homeowners Can Do

Pipe Inspection

  • Hire a licensed plumber to inspect your service line and interior plumbing
  • Check for discolored water (brown/orange = rust; white/cloudy = air or sediment)
  • Test water pressure - low pressure may indicate buildup in aging pipes
  • Look for visible corrosion on exposed pipes in basement or utility areas

Water Heater Maintenance

  • Flush your water heater annually to remove sediment
  • Check the anode rod every 2-3 years (prevents tank corrosion)
  • Set temperature to 120F to prevent scalding and reduce energy use
  • Replace water heaters older than 10-15 years proactively

CO Detector Placement

  • One detector per floor, minimum
  • Within 10 feet of each bedroom door
  • Near attached garage and utility room
  • 5 feet above the floor (CO rises with warm air) or on the ceiling
  • Not near windows, doors, or HVAC vents (air movement causes false readings)

Point Marion vs. Nearby Pennsylvania Cities

How Point Marion's infrastructure compares to nearby cities:

City Water Systems Violations Population
Point Marion 2 24 2,399
Germansville 0 N/A 2,400
Eldred 0 N/A 2,397
Schellsburg 0 N/A 2,407

ZIP Codes in Point Marion

Point Marion covers 1 ZIP code served by 2 water systems. Infrastructure condition varies by ZIP code based on housing age, pipe material, and water system maintenance. Check your specific ZIP code for localized data.

Data Sources

  • Water systems: EPA ECHO - Enforcement and Compliance History Online
  • Infrastructure risk: Derived model (housing age, violation history, system assessments)
  • Housing age: U.S. Census Bureau American Community Survey (ACS)
  • CO/gas incidents: NTSB, PHMSA pipeline incident reports

Source reporting periods vary. See each cited source for its publication schedule.

Infrastructure Risk by ZIP Code in Point Marion

Point Marion is covered by a single ZIP code, so one infrastructure profile applies citywide. Risk within it still depends on system age, pipe materials, and violation history.

ZIP Code Grade Score Violations
15474 N/A /100 24 View report →

Check your water system's infrastructure

Infrastructure risk varies by ZIP code and water system. Enter your ZIP for a personalized infrastructure assessment.

Check Your Infrastructure Risk

Frequently Asked Questions

How old are the pipes in Point Marion?
The median home build year in Point Marion is 1949, making typical plumbing infrastructure about 77 years old. Pipes older than 40-50 years have elevated risk of corrosion, leaks, and lead contamination.
Is Point Marion's water infrastructure safe?
The heuristic infrastructure stress indicator is 67/100, in the very-high model band. It does not predict pipe or system failures.
Is there CO or gas leak risk in Point Marion?
Point Marion has recorded 0 CO/gas incidents from NTSB data. While incidents are low, all homes should have working CO detectors as a precaution.
What is the infrastructure stress indicator for Point Marion?
The average heuristic infrastructure stress indicator for Point Marion is 67/100. It combines model inputs and does not estimate the likelihood of pipe deterioration.
How many water systems serve Point Marion?
Point Marion is served by 2 public water systems across 1 ZIP code. Multiple systems mean water quality and infrastructure condition can vary by neighborhood.
HomeCitiesPennsylvaniaPoint Marion, PA → Infrastructure

Get safety alerts for Point Marion, Pennsylvania

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.