WATER QUALITY OH 2 HEALTH VIOLATIONS

Water Quality in Dayton, OH: 19 Violations - Grade N/A

19 water systems · 29 directly mapped ZIP records

Available EPA records report 19 violations across 29 directly mapped ZIP records with known counts for Dayton. This is compliance evidence, not a property-level tap-water verdict.

Data: EPA Safe Drinking Water Information System (SDWIS)

19
Total Violations
19
Water Systems
2
Health-Based Violations
29
Direct EPA ZIP Records
29
ZIP Records with Violation Counts
13
ZIPs with Violations

Water Quality by ZIP Code in Dayton

This table shows typed EPA water evidence only. Missing violation counts are displayed as N/A, not zero.

Water Quality Overview

Dayton, Ohio has directly mapped EPA water-system data for 29 ZIP codes. This page reports typed compliance facts and does not relabel the multi-source Home Safety Score as a drinking-water grade.

The available EPA records report 19 violations, including 2 health-based violations across 29 directly mapped ZIP records with reported counts.

Lead Levels

The average 90th percentile lead level across Dayton water systems is 0.3249 mg/L - this exceeds the EPA action level of 0.015 mg/L. 20 ZIP codes exceed the EPA lead action level.

With 81% of homes built before 1986, Dayton has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.

Water Systems Serving Dayton

Dayton is served by 19 community water systems regulated under the Safe Drinking Water Act. These systems collectively serve approximately 485,366 people across 49 ZIP codes.

Each water system is identified by a Public Water System ID (PWSID) and is required to:

  • Test for over 90 regulated contaminants on a regular schedule
  • Report results to the EPA and state regulators
  • Issue an annual Consumer Confidence Report (CCR) to all customers
  • Take corrective action when violations occur

The EPA has taken 107 enforcement actions against water systems serving Dayton. Enforcement actions range from informal compliance assistance to formal orders and penalties.

How to Check Your Water in Dayton

  1. Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels and violation history

  2. Request your CCR - your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants

  3. Get a home test - certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel

  4. Consider filtration - NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics

  5. Check for advisories - monitor your local utility website and local news for boil water advisories or system alerts

Contaminants Detected in Dayton Water Systems

The following contaminants have been detected or caused violations across Dayton's water systems:

Contaminant Category MCL Violations ZIPs Affected Health-Based
Surface Water Treatment Rule Treatment Technique N/A 21 12 No
Stage 2 DBP Rule Treatment Technique N/A 12 6 Yes
Barium Inorganic 2 mg/L 1 1 No

MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.

EPA Enforcement History

The EPA and state regulators have taken 37 enforcement actions against water systems serving Dayton. Recent actions:

Date Action Type
2026-01-21 State Informal Action
2026-01-07 State Informal Action
2026-01-06 State Informal Action
2025-12-30 State Informal Action
2025-12-22 State Order Extension
2025-12-18 State Order Extension
2025-12-15 State Informal Action
2025-12-10 State Order Extension
2025-11-13 State Informal Action
2025-10-21 State Informal Action

Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2026-01-21.

Dayton vs. Nearby Ohio Cities

How Dayton's water quality compares to similar cities in Ohio:

City Direct EPA ZIPs Violations Systems Population
Dayton 29 19 19 485,366
Toledo 15 7 4 299,334
Akron 18 34 12 263,720
Cleveland 28 8 2 734,002

Water Quality by ZIP Code in Dayton

EPA coverage and recorded violations can differ across Dayton's ZIP codes. Missing counts are shown as unavailable, not zero:

ZIP Code Violations Health-Based
45426 6 0
45417 5 0
45449 5 1
45440 4 1
45458 3 1
45459 3 1
45434 2 0
45415 1 0
45424 1 0
45430 1 0
45431 1 0
45432 1 0
45435 1 0
45402 0 0
45403 0 0

Common Questions About Dayton Water

These are the most common questions residents search for about water quality in Dayton, Ohio:

Is Dayton water hard or soft? Water hardness varies by source. Dayton's 19 water systems use multiple sources. Check your ZIP code report for specific hardness data.

Can I drink Dayton tap water? City-level EPA records cannot determine safety at a specific tap. The measured subset contains 2 health-based violations; check the affected utility record and consider certified testing.

What is the best water filter for Dayton? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.

Dayton vs. Ohio Average

Understanding how Dayton compares to the broader Ohio average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.

To see how individual neighborhoods compare, check the ZIP code reports below - water quality can vary significantly even within Dayton.

ZIP Codes in Dayton

Dayton spans 49 ZIP codes. EPA water-system coverage is available for 29 directly mapped ZIP codes. Check each ZIP code for detailed contaminant data, violation history, and system information.

Data Sources

Source reporting periods vary. See each cited source for its publication schedule.

Frequently Asked Questions

Is Dayton tap water safe to drink?
City-level EPA records cannot determine whether a specific tap is safe. The available records report 19 violations across 29 directly mapped ZIP records with known counts in Dayton. Check the affected utility's current CCR and use certified property-level testing when needed.
How many water systems serve Dayton?
Dayton is served by 19 public public water systems supplying drinking water across 29 directly mapped ZIP codes. Water quality can vary between systems - check your specific ZIP code for localized data.
HomeCitiesDayton, OH → Water Quality

Get safety alerts for Dayton, Ohio

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.