Byesville, OH: 3 Health Violations — 54/100 (2026)
1 ZIP code · 1 water system · Updated 2026-06-03
Byesville ranks below average for tap water safety in OH — health-based violations are documented across multiple service areas in recent EPA monitoring data.
How Byesville Compares
Data: EPA SDWIS Last verified: 2026-06-03
What You Should Know About Byesville Water
- Your city's water systems recorded 7 violations in the past 5 years.
- Average lead level: 0.0063 mg/L.
- Homes built before 1986: 67% — older plumbing may contain lead solder.
- Estimated remediation: $3,600 per household.
- CDC health risk index: 15.59 — above typical levels.
Who Supplies Your Water in Byesville
With one provider handling most of Byesville's residential supply in OH, water service accountability is concentrated in a single utility among the 1 system on record.
Overview
We track water quality and home safety data for 1 ZIP code in Byesville, Ohio, covering 1 community water system serving approximately 4,490 people.
1 of 1 ZIP code (100%) have recorded EPA violations. 3 health-based violations documented.
Home Safety Score
Average Home Safety Score for Byesville: D (54/100)
The score combines three factors:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| Lead Levels | 90th percentile lead concentration vs EPA action level |
| Radon Risk | EPA radon zone classification |
Water Sources
Byesville water systems draw from: Surface water.
Lead & Copper
- Average lead level (90th percentile): 0.0063 mg/L (EPA action level: 0.015 mg/L)
- 0 ZIP codes exceed the EPA lead action level
Radon Risk
Dominant radon zone: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Top Contaminants
| Contaminant | Category | Violations | ZIPs Affected |
|---|---|---|---|
| Stage 2 DBP Rule | Treatment Technique | 4 | 1 |
| Surface Water Treatment Rule | Treatment Technique | 4 | 1 |
| Lead and Copper Rule | Treatment Technique | 2 | 1 |
| Contaminant 0800 | Other | 2 | 1 |
| Contaminant 0700 | Other | 2 | 1 |
Areas with Most Violations
| ZIP Code | Safety Score | Violations | Health-Based | System |
|---|---|---|---|---|
| 43723 | D | 7 | 3 | Byesville |
All ZIP Codes in Byesville
- 43723 [D] — 7 violations ⚠
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Updated daily.
Health Outcomes in Byesville
Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.
Compared to National Average
Vertical line = national average. ■ Above national · ■ Below national
Top Contaminants in Byesville Water
Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.
Housing & Infrastructure in Byesville
With 67% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
Decades of residential development in Byesville took place before the two main regulatory milestones that reduced plumbing-era lead risk: the phase-out of lead pipes before 1970, and the federal ban on lead solder in 1986. With a median build year of 1974, the housing stock here is anchored in that earlier period. The distinction between pre-1970 and 1970-to-1986 construction matters: the oldest homes may have lead pipes in the service line and lead solder in the copper joints, while the 1970-to-1986 tier still carries the solder risk even after lead pipes became less common. Together, these two risk layers affect a majority of the residential properties in the city — a fact the aggregate water quality data doesn't directly reveal.
Over half of homes in Byesville were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.
Source: U.S. Census Bureau ACS B25034.
Cost Context: What Remediation Means for Byesville Homeowners
The cost-to-equity ratio for remediation in Byesville is elevated — the financial planning challenge here is real and significant.
At 3.3% of home value, remediation costs in Byesville represent a significant financial burden. For homes valued near the median, fixing water and safety issues could cost $2,300–$5,600. Home values here are 41% below the Ohio average.
Lead Exposure Risk for Children in Byesville
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Households with kids in the home — for whom CDC guidance places particular weight on minimizing exposure — face a specific local picture in Byesville. 67% of homes here come from the pre-rule era, and aggregate utility samples either approach or cross 0.015 mg/L. A baseline draw-test kit and certified lead-removal filtration are available via retailer networks for households confirming conditions at a specific tap.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Flood & Climate Risk in Byesville
Taken together, Byesville's 85 NFIP flood insurance claims and 100% FEMA flood zone coverage place it in the moderate range of exposure. That middle position has specific implications for water quality. The contamination pathways that flooding can open — surface water overwhelming treatment facility intake, floodwaters infiltrating private wells, distribution pressure changes creating backflow — are not constant risks in a moderate-exposure community. But they do become active during significant flood events, and the claim record here indicates enough of those events to make flood timing an occasional factor in local water quality conversations.
Byesville has a moderate flood history with 85 FEMA claims averaging $18,582 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$3,600</strong> remediation cost per household.
Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.
Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.
What You Can Do in Byesville
- Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
- Install a certified water filter. Filters rated for Stage 2 DBP Rule can reduce the most common contaminant found in Byesville's water.
- Check your home's plumbing. With 67% of homes built before 1986, lead solder is a real possibility.
- Review your water system's CCR. Your utility publishes an annual Consumer Confidence Report with detailed test results. Request it or find it online.
Deep Dive Reports
Detailed analysis for Byesville, OH