Maryland, NY: 1 Health Violation — 66/100 (2026)
1 ZIP code · 2 water systems · Updated 2026-06-03
Across Maryland, EPA compliance data for NY sits at a moderate level — not alarming, but not uniformly clean across all service areas either.
How Maryland Compares
Data: EPA SDWIS Last verified: 2026-06-03
Key Facts for Maryland Residents
- Your city's water systems recorded 42 violations in the past 5 years.
- Average lead level: 0.001 mg/L.
- Homes built before 1986: 72% — older plumbing may contain lead solder.
- Estimated remediation: $2,700 per household.
- CDC health risk index: 12.18 — above typical levels.
Maryland's Water Providers
Across Maryland, NY, residential water comes from 2 primary utilities rather than a single consolidated provider. Each system operates independently — managing its own distribution infrastructure, rate schedules, and EPA compliance filings. Federal records track 2 water systems in the area, with these top providers accounting for the majority of residential connections.
Overview
We track water quality and home safety data for 1 ZIP code in Maryland, New York, covering 2 community water systems serving approximately 1,533 people.
1 of 1 ZIP code (100%) have recorded EPA violations. 1 health-based violation documented.
Home Safety Score
Average Home Safety Score for Maryland: C (66/100)
The score combines three factors:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| Lead Levels | 90th percentile lead concentration vs EPA action level |
| Radon Risk | EPA radon zone classification |
Water Sources
Maryland water systems draw from: Groundwater.
Lead & Copper
- Average lead level (90th percentile): 0.0010 mg/L (EPA action level: 0.015 mg/L)
- 0 ZIP codes exceed the EPA lead action level
Radon Risk
Dominant radon zone: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Top Contaminants
| Contaminant | Category | Violations | ZIPs Affected |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Technique | 10 | 1 |
| Contaminant 2049 | Other | 8 | 1 |
| Consumer Confidence Report Rule | Reporting | 6 | 1 |
| Stage 2 DBP Rule | Treatment Technique | 4 | 1 |
| Lead | Inorganic | 2 | 1 |
Areas with Most Violations
| ZIP Code | Safety Score | Violations | Health-Based | System |
|---|---|---|---|---|
| 12116 | C | 42 | 1 | Maryland Water District |
All ZIP Codes in Maryland
- 12116 [C] — 42 violations ⚠
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Updated daily.
Maryland Community Health Snapshot
Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.
Compared to National Average
Vertical line = national average. ■ Above national · ■ Below national
What's in Maryland's Water?
Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.
Maryland Infrastructure Age
With 72% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
The median home in Maryland was built in 1977 — a figure that places most of the city's residential stock in the era when lead solder was still standard in copper plumbing. Homes built before 1986 may have lead-soldered joints; those built before 1970 face the additional possibility of lead pipes in the service line itself.
Over half of homes in Maryland were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.
Source: U.S. Census Bureau ACS B25034.
How Remediation Costs Compare in Maryland
Property equity in Maryland sits at a moderate ratio to estimated remediation costs — a classification that reframes the household financial perspective from routine maintenance to deliberate budgeting, where most homeowners have a realistic path to addressing documented water and safety issues if they map the financial commitment against available resources before committing to scope.
Remediation costs are moderate relative to home values in Maryland. The estimated $1,750–$3,900 range is manageable for most homeowners but still worth budgeting for. Home values are 61% below the New York average.
Maryland: Lead Risk & Vulnerable Populations
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Despite citywide averages serving as the standard public reference point, those aggregates cannot resolve what is happening at one specific faucet — and where 72% of Maryland homes come from before the solder rule or where utility samples sit at or above the action mark, the gap between system data and faucet reality matters more than it does in lower-exposure communities. An in-home draw closes that gap, with certified filtration through retailer networks available where confirmed faucet results warrant additional measures.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Maryland: Flood History & Water Damage Risk
Across the NFIP's long tracking period, Maryland shows 6 claims and 100% of ZIP codes within FEMA-designated flood zones — figures that place it in moderate flood exposure territory. At this level, the water-quality implications of flooding — contaminated wells, stressed treatment intake, distribution backflow — move from theoretical edge cases to genuine periodic risks, particularly during higher-severity events.
Maryland has a moderate flood history with 6 FEMA claims averaging $10,220 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$2,700</strong> remediation cost per household.
Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.
Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.
What You Can Do in Maryland
- Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
- Install a certified water filter. Filters rated for Surface Water Treatment Rule can reduce the most common contaminant found in Maryland's water.
- Check your home's plumbing. With 72% of homes built before 1986, lead solder is a real possibility.
Deep Dive Reports
Detailed analysis for Maryland, NY