INFRASTRUCTURE NH HIGH RISK

Infrastructure Stress in Temple, NH: High

Modeled stress 47% · high · 0 water systems · Updated

Temple's heuristic infrastructure stress indicator is in the high model band. It does not establish that a pipe or system will fail.

Data: EPA ECHO, Census ACS, NTSB Last verified:

47%
Stress Indicator
high
Modeled Stress Level
0
CO/Gas Incidents
1986
Median Build Year
0
Water Systems
1
ZIP Codes

What is the infrastructure stress indicator?

The infrastructure stress indicator is a heuristic 0-100 composite of housing age, state funding need, violation history, and lead evidence. It is not a probability, measured pipe condition, or forecast of breaks, pressure loss, or contamination. Temple's average indicator is 47/100.

Infrastructure Risk Distribution

Temple is covered by a single ZIP code. Its infrastructure risk level:

Low 0 ZIPs
Moderate 0 ZIPs
High 1 ZIP
Very High 0 ZIPs

Infrastructure Risk Overview

Temple, New Hampshire has a high modeled infrastructure stress level with an average heuristic indicator of 47/100. The result does not establish that any pipe or system will fail.

The infrastructure stress indicator combines source inputs for housing age, funding need, violation history, and lead evidence. It does not measure the likelihood of pipe failure, water-main breaks, or system degradation.

Key Infrastructure Metrics

Metric Value
Stress indicator 47/100
Modeled stress level high
Water systems 0
Median build year 1986
Pre-1986 housing 60%
CO/gas incidents 0
ZIP codes 1
Population 1,367

Infrastructure Risk Distribution

How Temple's 1 ZIP code is distributed by infrastructure risk level:

Risk Level ZIP Codes Percentage
Low 0 0%
Moderate 0 0%
High 1 100%
Very High 0 0%

100% of Temple's ZIP codes are in the high or very-high modeled stress category. This is a distribution of heuristic inputs, not a failure forecast.

Water System Age and Pipe Materials

The median home in Temple was built in 1986 (approximately 40 years old). Housing age is one of the strongest proxies for water infrastructure age, as service lines and interior plumbing were typically installed during construction.

Pipe material risks by era:

Era Common Pipe Material Expected Lifespan Key Risk
Pre-1940 Lead, cast iron 50-75 years Lead contamination, corrosion
1940-1960 Galvanized steel, cast iron 40-60 years Rust, lead solder, reduced flow
1960-1980 Copper, galvanized steel 50-70 years Lead solder (pre-1986), pinhole leaks
1980-2000 Copper, PVC, CPVC 25-50 years Chlorine degradation of plastics
2000+ PEX, copper, CPVC 25-50+ years Generally low risk

With 60% of Temple's homes built before 1986, a significant portion of residential plumbing may contain lead solder or aging pipe materials.

Carbon Monoxide & Gas Safety

The available county record contains no CO/gas incidents. The average CO risk score is 0 out of 100.

Carbon monoxide is odorless and colorless - it is the leading cause of poisoning deaths in the U.S. Risk factors include:

  • Gas furnaces, water heaters, and stoves
  • Attached garages
  • Blocked chimneys or vents
  • Portable generators used indoors

Prevention:

  • Install CO detectors on every level, especially near bedrooms
  • Have gas appliances inspected annually
  • Never run generators, grills, or cars in enclosed spaces
  • Replace CO detectors every 5-7 years

What Homeowners Can Do

Pipe Inspection

  • Hire a licensed plumber to inspect your service line and interior plumbing
  • Check for discolored water (brown/orange = rust; white/cloudy = air or sediment)
  • Test water pressure - low pressure may indicate buildup in aging pipes
  • Look for visible corrosion on exposed pipes in basement or utility areas

Water Heater Maintenance

  • Flush your water heater annually to remove sediment
  • Check the anode rod every 2-3 years (prevents tank corrosion)
  • Set temperature to 120F to prevent scalding and reduce energy use
  • Replace water heaters older than 10-15 years proactively

CO Detector Placement

  • One detector per floor, minimum
  • Within 10 feet of each bedroom door
  • Near attached garage and utility room
  • 5 feet above the floor (CO rises with warm air) or on the ceiling
  • Not near windows, doors, or HVAC vents (air movement causes false readings)

Temple vs. Nearby New Hampshire Cities

How Temple's infrastructure compares to nearby cities:

City Water Systems Violations Population
Temple 0 N/A 1,367
Freedom 1 0 1,369
Francestown 0 N/A 1,347
Center Sandwich 0 N/A 1,399

ZIP Codes in Temple

Temple covers 1 ZIP code served by 0 water system. Infrastructure condition varies by ZIP code based on housing age, pipe material, and water system maintenance. Check your specific ZIP code for localized data.

Data Sources

  • Water systems: EPA ECHO - Enforcement and Compliance History Online
  • Infrastructure risk: Derived model (housing age, violation history, system assessments)
  • Housing age: U.S. Census Bureau American Community Survey (ACS)
  • CO/gas incidents: NTSB, PHMSA pipeline incident reports

Source reporting periods vary. See each cited source for its publication schedule.

Infrastructure Risk by ZIP Code in Temple

Temple is covered by a single ZIP code, so one infrastructure profile applies citywide. Risk within it still depends on system age, pipe materials, and violation history.

ZIP Code Grade Score Violations
03084 N/A /100 0 View report →

Check your water system's infrastructure

Infrastructure risk varies by ZIP code and water system. Enter your ZIP for a personalized infrastructure assessment.

Check Your Infrastructure Risk

Frequently Asked Questions

How old are the pipes in Temple?
The median home build year in Temple is 1986, making typical plumbing infrastructure about 40 years old. Pipes older than 40-50 years have elevated risk of corrosion, leaks, and lead contamination.
Is Temple's water infrastructure safe?
The heuristic infrastructure stress indicator is 47/100, in the high model band. It does not predict pipe or system failures.
Is there CO or gas leak risk in Temple?
Temple has recorded 0 CO/gas incidents from NTSB data. While incidents are low, all homes should have working CO detectors as a precaution.
What is the infrastructure stress indicator for Temple?
The average heuristic infrastructure stress indicator for Temple is 47/100. It combines model inputs and does not estimate the likelihood of pipe deterioration.
HomeCitiesNew HampshireTemple, NH → Infrastructure

Get safety alerts for Temple, New Hampshire

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool - no phone call required.