CITY REPORT NH 2 HEALTH VIOLATIONS

Danville, NH: 2 Health Violations — 70/100 (2026)

1 ZIP code · 5 water systems · Updated 2026-06-03

Tap water monitoring data for Danville shows a consistently clean picture in NH — few violations on record, compliance well above the median.

How Danville Compares

Danville70/100
New Hampshire avg64/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
5
Water Systems
1
ZIPs with Violations
B · 70
Avg Safety Score
Zone 2
Radon Risk (Moderate)
$407K
Median Home Value
$1,900
Est. Remediation (0.5% of home value)

Key Facts for Danville Residents

  • Your city's water systems recorded 4 violations in the past 5 years.
  • Homes built before 1986: 43% — older plumbing may contain lead solder.
  • Estimated remediation: $1,900 per household.
  • CDC health risk index: 11.66.

Danville's Water Providers

Danville, NH is covered by 3 major water utilities out of 5 federally tracked systems, each managing its own pipes, treatment processes, and EPA filings. What a household gets from the tap depends on which provider's system serves that address.

Colby Pond
Serves ~485 people · 4 violations
70
/100
Cotton Farms Mhp
Serves ~390 people · 4 violations
70
/100
Rock Rimmon Cooperative
Serves ~200 people · 4 violations
70
/100

Overview

We track water quality and home safety data for 1 ZIP code in Danville, New Hampshire, covering 5 community water systems serving approximately 4,325 people.

1 of 1 ZIP code (100%) have recorded EPA violations. 2 health-based violations documented.

Home Safety Score

Average Home Safety Score for Danville: B (70/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Danville water systems draw from: Groundwater.

Lead & Copper

  • Lead data: not yet available for Danville
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Top Contaminants

Contaminant Category Violations ZIPs Affected
Consumer Confidence Report Rule Reporting 4 1
Gross Beta Radionuclides 2 1
Contaminant 0700 Other 2 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
03819 B 4 2 Colby Pond

All ZIP Codes in Danville

  • 03819 [B] — 4 violations ⚠

Data Sources

Updated daily.

Danville Community Health Snapshot

10%
Asthma (US: 9.8%)
9.1%
Diabetes (US: 10.4%)
14.4%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 10% ↑
Diabetes 9.1% ↓
Mental Health 14.4% ↓

Vertical line = national average. Above national · Below national

What's in Danville's Water?

Consumer Confidence Report Rule 4 violations
Reporting
Gross Beta 2 violations
Radionuclides · EPA limit: 50 pCi/L
Contaminant 0700 2 violations
Other

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

Danville Infrastructure Age

1982
Median Build Year
43%
Built Before 1986
12%
Built Before 1970
Copper
Likely Pipe Material

With 43% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

The story of Danville's housing stock is one of layered development — neighborhoods built in different decades, each carrying the plumbing standards of their era. The median build year of 1982 reflects that layered character. Before 1986, lead solder was standard in copper plumbing; before 1970, lead pipes were commonly used for service lines. A substantial portion of the pre-1986 homes visible in the distribution above still carry the plumbing materials of those earlier standards — creating a risk environment that the city-wide aggregate water data doesn't fully capture.

1982
Median Year Built
43%
Pre-1986 (Lead Paint Risk)
12%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (12%) 1970–1986 (31%) Post-1986 (57%)

Most homes in Danville were built after 1986, reducing the risk of lead contamination from plumbing. Older homes should still be tested.

Source: U.S. Census Bureau ACS B25034.

How Remediation Costs Compare in Danville

Given current Danville valuations, the remediation-to-property-value ratio is low — most homeowners are looking at a proportionally modest share that fits within routine financial planning.

Median Home Value
$406,800
Est. Remediation
$1,900
Remediation as % of home value 0.5%

Remediation costs in Danville are relatively low compared to home values. The $950–$3,200 estimated range is a small fraction of median property value. Home values are 12% above the New Hampshire average.

Danville: Lead Risk & Vulnerable Populations

43%
Homes Built Before 1986

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

Older stock in Danville represents 43% of the inventory, and citywide monitoring runs at or above the federal action level — making an in-home read a standard household-level step.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Danville: Flood History & Water Damage Risk

Within the NFIP's national dataset, Danville falls in moderate-exposure territory — 3 documented incidents spanning multiple decades, with 100% of local ZIP codes sitting inside FEMA flood boundaries. That combination warrants inclusion in any thorough local water quality review.

3
Total FEMA Flood Claims
$3,176
Avg Claim Payout
100%
ZIPs in FEMA Flood Zones

Danville has a moderate flood history with 3 FEMA claims averaging $3,176 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$1,900</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

Frequently Asked Questions

Is the water safe to drink in Danville, NH?
Danville has an average water safety score of 70/100 (Grade B). 4 EPA violations have been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does Danville have?
Danville water systems have a total of 4 EPA violations, including 2 health-based violations. Violations are tracked across 1 ZIP code.
How does Danville compare to New Hampshire average?
Danville has an average water safety score of 70/100, which is above the New Hampshire state average of 64/100.
How many water systems serve Danville?
Danville is served by 5 public water systems across 1 ZIP code, serving approximately 4,325 people.
How much does it cost to fix water issues in Danville?
Estimated remediation costs in Danville average $1,900 per household, ranging from $950 to $3,200. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesNew Hampshire → Danville, NH

Get safety alerts for Danville, New Hampshire

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.