WATER QUALITY ND

Water Quality in Sawyer, ND: 1 Violation — Grade C

Grade C · Score 63/100 · 1 water system · Updated 2026-05-03

Sawyer's water has moderate compliance issues. Residents in affected areas should consider filtration.

Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03

Drinking water compliance data for Sawyer, ND reflects 1 EPA violation — details in the grid below.

C
Water Grade
1
Total Violations
1
Water Systems
1
ZIPs with Violations
1
ZIP Codes Monitored
4
Enforcement Actions

Water Quality by ZIP Code in Sawyer

Water quality varies across Sawyer's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.

ZIP Code Grade Score Violations Health
58781 C 63 1 0 View report →

Water Quality Overview

Sawyer, North Dakota receives a water quality grade of C with an overall score of 63 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).

The 1 water system serving Sawyer have accumulated 1 EPA violations (all monitoring/reporting type). These violations are tracked across 1 ZIP codes serving approximately 357 people.

What Grade C Means

A grade of C indicates moderate compliance issues. Sawyer's water systems have some violations that warrant attention. While the water may still be safe for most people, residents in affected ZIP codes should consider additional testing or filtration.

Lead Levels

The average 90th percentile lead level across Sawyer water systems is 0.0049 mg/L — within EPA limits. No ZIP codes exceed the EPA lead action level.

With 68% of homes built before 1986, Sawyer has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.

Radon Risk

Sawyer is in EPA Radon Zone 1 (High risk). The EPA recommends all homes in Zone 1 areas be tested for radon. Radon is the second leading cause of lung cancer after smoking.

Water Systems Serving Sawyer

Sawyer is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 357 people across 1 ZIP codes.

Each water system is identified by a Public Water System ID (PWSID) and is required to:

  • Test for over 90 regulated contaminants on a regular schedule
  • Report results to the EPA and state regulators
  • Issue an annual Consumer Confidence Report (CCR) to all customers
  • Take corrective action when violations occur

The EPA has taken 4 enforcement actions against water systems serving Sawyer. Enforcement actions range from informal compliance assistance to formal orders and penalties.

How to Check Your Water in Sawyer

  1. Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores

  2. Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants

  3. Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel

  4. Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics

  5. Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts

Contaminants Detected in Sawyer Water Systems

The following contaminants have been detected or caused violations across Sawyer's water systems:

Contaminant Category MCL Violations ZIPs Affected Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 0.08 mg/L 1 1 No

MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.

EPA Enforcement History

The EPA and state regulators have taken 4 enforcement actions against water systems serving Sawyer. Recent actions:

Date Action Type
2024-10-28 State Order Extension
2023-10-02 State Informal Action
2023-09-23 State Informal Action
2023-09-23 State Informal Enforcement

Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2024-10-28.

Sawyer vs. Nearby North Dakota Cities

How Sawyer's water quality compares to similar cities in North Dakota:

City Grade Violations Systems Population
Sawyer C 1 1 357
Kulm A 0 1 354
Mcville B 0 1 349
Pekin D 0 1 349

Common Questions About Sawyer Water

These are the most common questions residents search for about water quality in Sawyer, North Dakota:

Is Sawyer water hard or soft? Water hardness varies by source. Sawyer's 1 water system uses a single source. Check your ZIP code report for specific hardness data.

Can I drink Sawyer tap water? Sawyer's water receives a grade of C (63/100). No health-based violations have been recorded, but home testing is always recommended.

What is the best water filter for Sawyer? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.

Sawyer vs. North Dakota Average

Understanding how Sawyer compares to the broader North Dakota average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.

To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Sawyer.

ZIP Codes in Sawyer

Sawyer spans 1 ZIP code. The ZIP with the lowest water quality score is 58781. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.

Data Sources

Updated daily.

Frequently Asked Questions

Is Sawyer tap water safe to drink?
Sawyer's water receives a grade of C (63/100). Some areas have recorded violations — residents in affected ZIP codes may want to consider water testing.
What contaminants are found in Sawyer water?
Sawyer water systems have recorded 1 total violation, including 0 health-based violations. Specific contaminants vary by ZIP code — check your ZIP report for details on detected substances.
How many water violations does Sawyer have?
Sawyer has 1 total EPA violation across 1 water system. 1 of 1 ZIP codes have at least one violation.
How many water systems serve Sawyer?
Sawyer is served by 1 public water system supplying drinking water across 1 ZIP codes. Water quality can vary between systems — check your specific ZIP code for localized data.
HomeCitiesNorth DakotaSawyer, ND → Water Quality

Get safety alerts for Sawyer, North Dakota

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.