WATER QUALITY NC

Water Quality in Waco, NC: No Violations — Grade D

Grade D · Score 53/100 · 1 water system · Updated 2026-05-03

Waco's water has significant violations. Water testing and filtration are recommended.

Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03

No EPA violations have been identified for Waco, NC — 1 system, all within federal limits.

D
Water Grade
0
Total Violations
1
Water Systems
0
ZIPs with Violations
1
ZIP Codes Monitored

Water Quality by ZIP Code in Waco

Water quality varies across Waco's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.

ZIP Code Grade Score Violations Health
28169 D 53 0 0 View report →

Water Quality Overview

Waco, North Carolina receives a water quality grade of D with an overall score of 53 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).

No EPA violations have been recorded for the 1 water system serving Waco. This is a positive indicator, though it does not guarantee the absence of all contaminants — some substances (like PFAS) are not yet fully regulated.

What Grade D Means

A grade of D indicates significant compliance issues. Waco's water systems have accumulated violations that suggest ongoing water quality challenges. Residents should check their specific ZIP code report and consider water testing or filtration.

Lead Levels

Lead testing data for Waco is currently being collected. The EPA requires all community water systems to test for lead under the Lead and Copper Rule.

With 56% of homes built before 1986, Waco has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.

Radon Risk

Waco is in EPA Radon Zone 2 (Moderate risk). Testing is recommended, especially for homes with basements or ground-level living spaces.

Water Systems Serving Waco

Waco is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 6,353 people across 1 ZIP codes.

Each water system is identified by a Public Water System ID (PWSID) and is required to:

  • Test for over 90 regulated contaminants on a regular schedule
  • Report results to the EPA and state regulators
  • Issue an annual Consumer Confidence Report (CCR) to all customers
  • Take corrective action when violations occur

How to Check Your Water in Waco

  1. Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores

  2. Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants

  3. Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel

  4. Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics

  5. Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts

Waco vs. Nearby North Carolina Cities

How Waco's water quality compares to similar cities in North Carolina:

City Grade Violations Systems Population
Waco D 0 1 6,353
Crouse D 0 1 6,353
Ayden B 0 1 6,366
Atlantic Beach B 1 1 6,380

Common Questions About Waco Water

These are the most common questions residents search for about water quality in Waco, North Carolina:

Is Waco water hard or soft? Water hardness varies by source. Waco's 1 water system uses a single source. Check your ZIP code report for specific hardness data.

Can I drink Waco tap water? Waco's water receives a grade of D (53/100). No health-based violations have been recorded, but home testing is always recommended.

What is the best water filter for Waco? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.

Waco vs. North Carolina Average

Understanding how Waco compares to the broader North Carolina average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.

To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Waco.

ZIP Codes in Waco

Waco spans 1 ZIP code. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.

Data Sources

Updated daily.

Frequently Asked Questions

Is Waco tap water safe to drink?
Waco's water receives a grade of D (53/100). 0 health-based violations have been recorded. Independent water testing and filtration are recommended.
What contaminants are found in Waco water?
Waco water systems have zero recorded violations. While this is excellent, the EPA recommends annual testing as contaminants can enter your water through home plumbing.
How many water violations does Waco have?
Waco has 0 total EPA violations across 1 water system. 0 of 1 ZIP codes have at least one violation.
How many water systems serve Waco?
Waco is served by 1 public water system supplying drinking water across 1 ZIP codes. Water quality can vary between systems — check your specific ZIP code for localized data.
HomeCitiesNorth CarolinaWaco, NC → Water Quality

Get safety alerts for Waco, North Carolina

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.