WATER QUALITY MS

Water Quality in Shannon, MS: 11 Violations — Grade C

Grade C · Score 69/100 · 3 water systems · Updated 2026-05-03

Shannon's water has moderate compliance issues. Residents in affected areas should consider filtration.

Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03

On record with EPA: Shannon, MS has 11 water violations.

C
Water Grade
11
Total Violations
3
Water Systems
1
ZIPs with Violations
1
ZIP Codes Monitored
10
Enforcement Actions

Water Quality by ZIP Code in Shannon

Water quality varies across Shannon's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.

ZIP Code Grade Score Violations Health
38868 C 69 11 0 View report →

Water Quality Overview

Shannon, Mississippi receives a water quality grade of C with an overall score of 69 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).

The 3 water systems serving Shannon have accumulated 11 EPA violations (all monitoring/reporting type). These violations are tracked across 1 ZIP codes serving approximately 6,249 people.

What Grade C Means

A grade of C indicates moderate compliance issues. Shannon's water systems have some violations that warrant attention. While the water may still be safe for most people, residents in affected ZIP codes should consider additional testing or filtration.

Lead Levels

The average 90th percentile lead level across Shannon water systems is 0.0007 mg/L — within EPA limits. No ZIP codes exceed the EPA lead action level.

With 50% of homes built before 1986, Shannon has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.

Radon Risk

Shannon is in EPA Radon Zone 2 (Moderate risk). Testing is recommended, especially for homes with basements or ground-level living spaces.

Water Systems Serving Shannon

Shannon is served by 3 community water systems regulated under the Safe Drinking Water Act. These systems collectively serve approximately 6,249 people across 1 ZIP codes.

Each water system is identified by a Public Water System ID (PWSID) and is required to:

  • Test for over 90 regulated contaminants on a regular schedule
  • Report results to the EPA and state regulators
  • Issue an annual Consumer Confidence Report (CCR) to all customers
  • Take corrective action when violations occur

The EPA has taken 10 enforcement actions against water systems serving Shannon. Enforcement actions range from informal compliance assistance to formal orders and penalties.

How to Check Your Water in Shannon

  1. Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores

  2. Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants

  3. Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel

  4. Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics

  5. Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts

Contaminants Detected in Shannon Water Systems

The following contaminants have been detected or caused violations across Shannon's water systems:

Contaminant Category MCL Violations ZIPs Affected Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 0.08 mg/L 4 1 No
Stage 1 DBP Rule Treatment Technique N/A 2 1 No
Copper Inorganic 1.3 mg/L 1 1 No
Lead and Copper Rule Treatment Technique N/A 1 1 No
Surface Water Treatment Rule Treatment Technique N/A 1 1 No

MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.

EPA Enforcement History

The EPA and state regulators have taken 7 enforcement actions against water systems serving Shannon. Recent actions:

Date Action Type
2025-03-19 State Order Action
2025-03-03 State Informal Action
2025-02-25 State Order Extension
2025-02-05 State Order Action
2025-01-30 State Order Action
2025-01-29 State Order Action
2024-03-07 State Order Action

Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2025-03-19.

Shannon vs. Nearby Mississippi Cities

How Shannon's water quality compares to similar cities in Mississippi:

City Grade Violations Systems Population
Shannon C 11 3 6,249
Conehatta C 0 1 6,207
Sebastopol A 1 1 6,207
Charleston B 20 5 6,187

Common Questions About Shannon Water

These are the most common questions residents search for about water quality in Shannon, Mississippi:

Is Shannon water hard or soft? Water hardness varies by source. Shannon's 3 water systems use multiple sources. Check your ZIP code report for specific hardness data.

Can I drink Shannon tap water? Shannon's water receives a grade of C (69/100). No health-based violations have been recorded, but home testing is always recommended.

What is the best water filter for Shannon? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.

Shannon vs. Mississippi Average

Understanding how Shannon compares to the broader Mississippi average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.

To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Shannon.

ZIP Codes in Shannon

Shannon spans 1 ZIP code. The ZIP with the lowest water quality score is 38868. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.

Data Sources

Updated daily.

Frequently Asked Questions

Is Shannon tap water safe to drink?
Shannon's water receives a grade of C (69/100). Some areas have recorded violations — residents in affected ZIP codes may want to consider water testing.
What contaminants are found in Shannon water?
Shannon water systems have recorded 11 total violations, including 0 health-based violations. Specific contaminants vary by ZIP code — check your ZIP report for details on detected substances.
How many water violations does Shannon have?
Shannon has 11 total EPA violations across 3 water systems. 1 of 1 ZIP codes have at least one violation.
How many water systems serve Shannon?
Shannon is served by 3 public water systems supplying drinking water across 1 ZIP codes. Water quality can vary between systems — check your specific ZIP code for localized data.
HomeCitiesMississippiShannon, MS → Water Quality

Get safety alerts for Shannon, Mississippi

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.