Fillmore, MO: 1 Health Violation — 69/100 (2026)
1 ZIP code · 3 water systems · Updated 2026-06-03
Recent monitoring in Fillmore shows middle-tier safety for MO — some systems are clean; others have logged EPA violations.
How Fillmore Compares
Data: EPA SDWIS Last verified: 2026-06-03
What You Should Know About Fillmore Water
- Your city's water systems recorded 2 violations in the past 5 years.
- Average lead level: 0.0019 mg/L.
- Homes built before 1986: 74% — older plumbing may contain lead solder.
- Estimated remediation: $3,300 per household.
- CDC health risk index: 13.77 — above typical levels.
Who Supplies Your Water in Fillmore
Water supply in Fillmore, MO follows a divided structure: 3 utilities account for the largest share of residential service out of 3 total systems, each managing its own distribution network and EPA reporting. Because these systems operate independently, rate decisions and compliance outcomes are determined separately.
Overview
We track water quality and home safety data for 1 ZIP code in Fillmore, Missouri (population ~515), covering 3 community water systems serving approximately 7,434 people region-wide.
1 of 1 ZIP code (100%) have recorded EPA violations. 1 health-based violation documented.
Home Safety Score
Average Home Safety Score for Fillmore: C (69/100)
The score combines three factors:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| Lead Levels | 90th percentile lead concentration vs EPA action level |
| Radon Risk | EPA radon zone classification |
Water Sources
Fillmore water systems draw from: Groundwater.
Lead & Copper
- Average lead level (90th percentile): 0.0019 mg/L (EPA action level: 0.015 mg/L)
- 0 ZIP codes exceed the EPA lead action level
Radon Risk
Dominant radon zone: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Top Contaminants
| Contaminant | Category | Violations | ZIPs Affected |
|---|---|---|---|
| Haloacetic Acids (HAA5) | Disinfection Byproducts | 2 | 1 |
| Consumer Confidence Report Rule | Reporting | 2 | 1 |
Areas with Most Violations
| ZIP Code | Safety Score | Violations | Health-Based | System |
|---|---|---|---|---|
| 64449 | C | 2 | 1 | Andrew County Pwsd 3 |
All ZIP Codes in Fillmore
- 64449 [C] — 2 violations ⚠
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Updated daily.
Health Outcomes in Fillmore
Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.
Compared to National Average
Vertical line = national average. ■ Above national · ■ Below national
Top Contaminants in Fillmore Water
Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.
Housing & Infrastructure in Fillmore
With 74% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
Decades of residential development in Fillmore took place before the two main regulatory milestones that reduced plumbing-era lead risk: the phase-out of lead pipes before 1970, and the federal ban on lead solder in 1986. With a median build year of 1957, the housing stock here is anchored in that earlier period. The distinction between pre-1970 and 1970-to-1986 construction matters: the oldest homes may have lead pipes in the service line and lead solder in the copper joints, while the 1970-to-1986 tier still carries the solder risk even after lead pipes became less common. Together, these two risk layers affect a majority of the residential properties in the city — a fact the aggregate water quality data doesn't directly reveal.
Over half of homes in Fillmore were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.
Source: U.S. Census Bureau ACS B25034.
Cost Context: What Remediation Means for Fillmore Homeowners
Cost-to-value data for Fillmore produces a high remediation-share classification — the equity impact here is elevated, placing this market in the tier where financial preparation is a meaningful factor in how homeowners approach documented issues.
At 3.2% of home value, remediation costs in Fillmore represent a significant financial burden. For homes valued near the median, fixing water and safety issues could cost $2,150–$4,600. Home values here are 41% below the Missouri average.
Lead Exposure Risk for Children in Fillmore
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Although utility-side compliance with federal Lead and Copper requirements remains the system reference, that compliance does not extend down into interior plumbing. With 74% of Fillmore stock built before the solder ban and aggregate readings at or beyond the action mark, a household-level sample becomes the practical way to close that information gap.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Flood & Climate Risk in Fillmore
Flood history in Fillmore spans 4 NFIP claims and 100% flood zone coverage — enough to place it in moderate-exposure territory where flood events are genuinely recurring rather than statistical outliers. That distinction matters for water quality assessment because the connection between flooding and water safety is not uniform across communities. In low-exposure areas, flooding rarely generates the conditions needed to compromise treatment or distribution infrastructure. In high-exposure areas, it can do so repeatedly. Moderate-exposure communities sit in between: flood events occur with enough frequency to make periodic infrastructure stress a reasonable concern, particularly for private well owners and residents in lower-elevation FEMA-designated zones.
Fillmore has a moderate flood history with 4 FEMA claims. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$3,300</strong> remediation cost per household.
Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.
Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.
What You Can Do in Fillmore
- Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
- Install a certified water filter. Filters rated for Haloacetic Acids (HAA5) can reduce the most common contaminant found in Fillmore's water.
- Check your home's plumbing. With 74% of homes built before 1986, lead solder is a real possibility.
Deep Dive Reports
Detailed analysis for Fillmore, MO