HOME SAFETY MO

Is Belton, MO Safe to Buy? Home Safety Score 50/100

Score 50/100 · Risk: moderate-high · Home Safety Grade D · Updated

Belton has moderate-to-high risk. Several risk factors require careful evaluation.

Score data: EPA SDWIS, EPA PFAS monitoring, EPA Radon Zones, EPA Air Quality Index Last verified:

Safety upgrade budgets in Belton sit at the more accessible end of the remediation spectrum - a practical planning number rather than a significant equity concern, and one that most homeowners here can work with through routine financial preparation.

D
Home Safety Grade
0
ZIPs Over Lead Limit
1%
A/V Share of Claim-Record ZIPs
Zone 1
Radon (High)
63
AQI (Moderate)
$1,100
Est. Remediation
0.5%
Equity Trap Ratio

What is a home safety score?

Home Safety Score model 4.0.0 combines EPA SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, UCMR5 PFAS, EPA radon zone, and annual AQI with complete coverage. Belton scores 50/100 with a "moderate-high" risk level.

Remediation Cost Breakdown

Estimated costs to address safety issues for a typical home in Belton:

Filtration $600
Pfas $500

Cost ranges are estimates based on national averages. Actual costs vary by property. Get 3 quotes before proceeding.

Per-ZIP Home Safety Scores

Belton is covered by a single ZIP code, so one safety score applies citywide.

ZIP Code Score Grade
64012 50 D View report →

Home Safety Overview

Belton, Missouri has moderate-to-high risk for homebuyers. The average home safety score is 50/100 across 1 ZIP code. Several risk factors require careful evaluation during due diligence.

Safety Score Card

A composite view of Belton's key risk indicators:

Risk Factor Value Assessment
Water Compliance 25 EPA violations across 1 direct ZIP records Recorded violations
Lead Risk 0.0029 mg/L Low risk
Flood Risk 1% of claim-record ZIPs have A/V-family dominant recorded rated zones Historical claims evidence
Radon Zone 1 (High) Elevated risk
Air Quality AQI 63 (Moderate) Moderate risk

Cost to Fix: Remediation Breakdown

Estimated costs to address safety issues for a typical home in Belton:

Component Estimated Cost
Filtration $600
Pfas $500
Total (low estimate) $600
Total (mid estimate) $1K
Total (high estimate) $2K

Cost ranges are estimates based on national averages and local data. Actual costs vary by property condition, contractor, and scope of work. Get 3 quotes before proceeding.

Belton vs. Nearby Missouri Cities

How Belton's overall risk compares to similar cities in Missouri:

City Home Safety Grade Lead ZIPs Over Limit Flood Claims Population
Belton D 0 50 28,980
Farmington N/A 0 9 28,800
Imperial B 0 132 28,741
Branson C 0 180 28,295

Homebuyer Safety Checklist for Belton

Before purchasing a home in Belton, Missouri, complete these checks:

Water Quality

  • Request the latest Consumer Confidence Report (CCR) from the water utility
  • Test tap water for lead, bacteria, and nitrates ($20-$50 for DIY kit)

Radon

  • Conduct a radon test ($15-$30 for short-term kit, $150-$300 for professional)
  • Belton is in Radon Zone 1 (High risk) - testing is strongly recommended

Flood Risk

  • Check the property's FEMA flood zone at msc.fema.gov
  • Ask about flood history and past insurance claims
  • Review the claims-only zone evidence: 1% of ZIPs with NFIP claim records have A/V-family dominant recorded rated zones. This does not replace an address-level FEMA map check.

Lead Paint & Pipes

  • For homes built before 1978: request lead paint disclosure
  • For homes built before 1986: inspect plumbing for lead solder and pipes
  • 51% of Belton homes built before 1986 - pipe inspection recommended

General

  • Check for carbon monoxide detectors on every level
  • Inspect for visible mold, water stains, or musty odors
  • Verify the home's connection to a regulated public water system

Data Sources

  • Water quality: EPA SDWIS
  • Lead: EPA Lead and Copper Rule
  • Flood: FEMA NFIP
  • Radon: EPA Radon Zones
  • Air quality: EPA AirNow
  • Home values: U.S. Census Bureau ACS B25077
  • Remediation costs: National cost model (EPA, Census, FEMA data)

Source reporting periods vary. See each cited source for its publication schedule.

Check your specific ZIP code

City averages can hide neighborhood-level risks. Enter your ZIP for a personalized home safety score.

Check Your Home Safety Score

Frequently Asked Questions

Is Belton safe to buy a home?
Belton has a moderate-high measured-score rating (average: 50/100). Review the four model components and the separate contextual risks before purchasing.
What is the home safety score for Belton?
Belton has a Home Safety Score of 50 out of 100 under model 4.0.0, combining water compliance, PFAS, radon, and annual AQI with complete coverage.
How much does remediation cost in Belton?
The estimated average remediation cost for a typical home in Belton is $1,100. This includes potential costs for water filtration, lead abatement, radon mitigation, and flood-proofing based on local risk factors.
What is the equity trap ratio in Belton?
The equity trap ratio in Belton is 0.5%, which measures remediation costs as a percentage of median home value. This is low - remediation costs are a small fraction of home value.
Is radon a concern in Belton?
Belton is in EPA Radon Zone 1 (High risk). This is the highest risk zone - EPA recommends testing all homes.
HomeCitiesMissouriBelton, MO → Home Safety

Get safety alerts for Belton, Missouri

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.