Water Quality in Taylors Falls, MN: No Violations — Grade B
Grade B · Score 83/100 · 1 water system · Updated 2026-05-03
Taylors Falls's water is mostly safe. Minor violations exist but are primarily monitoring-related.
Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03
Zero EPA violations on record for Taylors Falls, MN — the 1 public water system tracked here have met every federal contaminant limit, cleared every monitoring requirement, and drawn no enforcement actions from the agency across the full compliance dataset.
Water Quality by ZIP Code in Taylors Falls
Water quality varies across Taylors Falls's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | Grade | Score | Violations | Health | |
|---|---|---|---|---|---|
| 55084 | B | 83 | 0 | 0 | View report → |
Water Quality Overview
Taylors Falls, Minnesota receives a water quality grade of B with an overall score of 83 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).
No EPA violations have been recorded for the 1 water system serving Taylors Falls. This is a positive indicator, though it does not guarantee the absence of all contaminants — some substances (like PFAS) are not yet fully regulated.
What Grade B Means
A grade of B indicates good compliance with EPA drinking water standards. While not perfect, Taylors Falls's water systems meet the vast majority of federal requirements. Minor violations may exist but typically relate to monitoring or reporting rather than health-based standards.
Lead Levels
The average 90th percentile lead level across Taylors Falls water systems is 0.0030 mg/L — within EPA limits. No ZIP codes exceed the EPA lead action level.
With 58% of homes built before 1986, Taylors Falls has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.
Radon Risk
Taylors Falls is in EPA Radon Zone 2 (Moderate risk). Testing is recommended, especially for homes with basements or ground-level living spaces.
Water Systems Serving Taylors Falls
Taylors Falls is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 1,067 people across 1 ZIP codes.
Each water system is identified by a Public Water System ID (PWSID) and is required to:
- Test for over 90 regulated contaminants on a regular schedule
- Report results to the EPA and state regulators
- Issue an annual Consumer Confidence Report (CCR) to all customers
- Take corrective action when violations occur
How to Check Your Water in Taylors Falls
Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores
Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants
Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel
Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics
Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts
Taylors Falls vs. Nearby Minnesota Cities
How Taylors Falls's water quality compares to similar cities in Minnesota:
| City | Grade | Violations | Systems | Population |
|---|---|---|---|---|
| Taylors Falls | B | 0 | 1 | 1,067 |
| Keewatin | B | 0 | 1 | 1,068 |
| Sherburn | C | 0 | 1 | 1,058 |
| Morristown | C | 4 | 2 | 1,047 |
Common Questions About Taylors Falls Water
These are the most common questions residents search for about water quality in Taylors Falls, Minnesota:
Is Taylors Falls water hard or soft? Water hardness varies by source. Taylors Falls's 1 water system uses a single source. Check your ZIP code report for specific hardness data.
Can I drink Taylors Falls tap water? Taylors Falls's water receives a grade of B (83/100). No health-based violations have been recorded, but home testing is always recommended.
What is the best water filter for Taylors Falls? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.
Taylors Falls vs. Minnesota Average
Understanding how Taylors Falls compares to the broader Minnesota average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.
To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Taylors Falls.
ZIP Codes in Taylors Falls
Taylors Falls spans 1 ZIP code. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
- Enforcement: EPA ECHO database
- Filter recommendations: NSF/ANSI certified products
Updated daily.
Frequently Asked Questions
Your Water is Safe — Here's How to Keep It That Way
Grade B is excellent news. Here's what proactive homeowners do to maintain water quality:
Annual Water Testing
EPA recommends annual testing even with clean water. Home test kits: $20-$50. Catches changes before they become problems.
Maintenance Filtration
A basic carbon filter removes chlorine taste and catches emerging contaminants like PFAS that aren't yet fully regulated.
Plumbing Check
Even safe city water picks up lead from home pipes. If your home was built before 1986, a one-time pipe inspection is recommended.