Mechanic Falls, ME: 2 Violations — 69/100 (2026)
1 ZIP code · 1 water system · Updated 2026-06-03
Mechanic Falls shows moderate tap water quality for ME — some areas carry documented EPA violations while others meet standards without issues.
How Mechanic Falls Compares
Data: EPA SDWIS Last verified: 2026-06-03
Key Facts for Mechanic Falls Residents
- Your city's water systems recorded 2 violations in the past 5 years.
- Average lead level: 0.0008 mg/L.
- Homes built before 1986: 53% — older plumbing may contain lead solder.
- Estimated remediation: $2,400 per household.
- CDC health risk index: 13.83 — above typical levels.
Mechanic Falls's Water Providers
Across most of Mechanic Falls, ME, residential water comes from a single utility. That provider sets rates, manages infrastructure maintenance, and files compliance reports with the EPA on behalf of the households it serves. Federal tracking data shows 1 system on record, but one carries the bulk of the service load.
Overview
We track water quality and home safety data for 1 ZIP code in Mechanic Falls, Maine, covering 1 community water system serving approximately 3,108 people.
1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.
Home Safety Score
Average Home Safety Score for Mechanic Falls: C (69/100)
The score combines three factors:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| Lead Levels | 90th percentile lead concentration vs EPA action level |
| Radon Risk | EPA radon zone classification |
Water Sources
Mechanic Falls water systems draw from: Groundwater.
Lead & Copper
- Average lead level (90th percentile): 0.0008 mg/L (EPA action level: 0.015 mg/L)
- 0 ZIP codes exceed the EPA lead action level
Radon Risk
Dominant radon zone: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Top Contaminants
| Contaminant | Category | Violations | ZIPs Affected |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Technique | 2 | 1 |
| Consumer Confidence Report Rule | Reporting | 2 | 1 |
Areas with Most Violations
| ZIP Code | Safety Score | Violations | Health-Based | System |
|---|---|---|---|---|
| 04256 | C | 2 | 0 | Mechanic Falls Water Department |
All ZIP Codes in Mechanic Falls
- 04256 [C] — 2 violations
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Updated daily.
Mechanic Falls Community Health Snapshot
Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.
Compared to National Average
Vertical line = national average. ■ Above national · ■ Below national
What's in Mechanic Falls's Water?
Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.
Mechanic Falls Infrastructure Age
With 53% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
Reading the housing age data for Mechanic Falls — median build year 1988 — the overriding implication is that the plumbing materials inside a typical home here reflect pre-1986 construction standards. In practical terms, that means lead-soldered copper joints are common across much of the housing stock. Where those materials are present, water can leach lead as it moves through joints — a pathway that corrosion control treatment under federal rules is designed to reduce, though it cannot eliminate lead risk where the plumbing materials themselves contain lead.
Over half of homes in Mechanic Falls were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.
Source: U.S. Census Bureau ACS B25034.
How Remediation Costs Compare in Mechanic Falls
While Mechanic Falls homeowners face a manageable path to remediation, the equity share sits in the moderate tier — a signal that proactive budgeting matters more here than in lower-ratio markets.
Remediation costs are moderate relative to home values in Mechanic Falls. The estimated $1,600–$3,300 range is manageable for most homeowners but still worth budgeting for. Home values are 14% below the Maine average.
Mechanic Falls: Lead Risk & Vulnerable Populations
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Before the federal solder ban, lead solder was a routine plumbing material, and 53% of the Mechanic Falls inventory was built in that earlier era — a share large enough to move household-level reads onto the standard list.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Mechanic Falls: Flood History & Water Damage Risk
Multiple flood events have been recorded for Mechanic Falls through the NFIP — 5 claims in total, with 100% of ZIP codes in FEMA-designated zones — pointing to a flood exposure profile that merits inclusion in a water quality assessment without reaching high-severity planning territory.
Mechanic Falls has a moderate flood history with 5 FEMA claims averaging $4,046 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$2,400</strong> remediation cost per household.
Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.
Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.
What You Can Do in Mechanic Falls
- Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
- Install a certified water filter. Filters rated for Surface Water Treatment Rule can reduce the most common contaminant found in Mechanic Falls's water.
- Check your home's plumbing. With 53% of homes built before 1986, lead solder is a real possibility.
Deep Dive Reports
Detailed analysis for Mechanic Falls, ME