INFRASTRUCTURE MD HIGH RISK

Infrastructure Stress in Washington Grove, MD: High

Modeled stress 60% · high · 1 water system · Updated

Washington Grove's heuristic infrastructure stress indicator is in the high model band. It does not establish that a pipe or system will fail.

Data: EPA ECHO, Census ACS, NTSB Last verified:

60%
Stress Indicator
high
Modeled Stress Level
12
CO/Gas Incidents
1957
Median Build Year
1
Water Systems
1
ZIP Codes

What is the infrastructure stress indicator?

The infrastructure stress indicator is a heuristic 0-100 composite of housing age, state funding need, violation history, and lead evidence. It is not a probability, measured pipe condition, or forecast of breaks, pressure loss, or contamination. Washington Grove's average indicator is 60/100.

What are CO/gas incidents?

Carbon monoxide (CO) and gas incidents tracked by the NTSB include pipeline failures, gas leaks, and CO exposure events. CO is odorless and can be fatal - the CDC reports about 420 deaths annually from unintentional CO poisoning. Every home should have working CO detectors on each floor, tested monthly. Washington Grove has 12 recorded incidents in the NTSB database.

Infrastructure Risk Distribution

Washington Grove is covered by a single ZIP code. Its infrastructure risk level:

Low 0 ZIPs
Moderate 0 ZIPs
High 1 ZIP
Very High 0 ZIPs

Infrastructure Risk Overview

Washington Grove, Maryland has a high modeled infrastructure stress level with an average heuristic indicator of 60/100. The result does not establish that any pipe or system will fail.

The infrastructure stress indicator combines source inputs for housing age, funding need, violation history, and lead evidence. It does not measure the likelihood of pipe failure, water-main breaks, or system degradation.

Key Infrastructure Metrics

Metric Value
Stress indicator 60/100
Modeled stress level high
Water systems 1
Median build year 1957
Pre-1986 housing 87%
CO/gas incidents 12
ZIP codes 1
Population 590

Infrastructure Risk Distribution

How Washington Grove's 1 ZIP code is distributed by infrastructure risk level:

Risk Level ZIP Codes Percentage
Low 0 0%
Moderate 0 0%
High 1 100%
Very High 0 0%

100% of Washington Grove's ZIP codes are in the high or very-high modeled stress category. This is a distribution of heuristic inputs, not a failure forecast.

Water System Age and Pipe Materials

The median home in Washington Grove was built in 1957 (approximately 69 years old). Housing age is one of the strongest proxies for water infrastructure age, as service lines and interior plumbing were typically installed during construction.

Pipe material risks by era:

Era Common Pipe Material Expected Lifespan Key Risk
Pre-1940 Lead, cast iron 50-75 years Lead contamination, corrosion
1940-1960 Galvanized steel, cast iron 40-60 years Rust, lead solder, reduced flow
1960-1980 Copper, galvanized steel 50-70 years Lead solder (pre-1986), pinhole leaks
1980-2000 Copper, PVC, CPVC 25-50 years Chlorine degradation of plastics
2000+ PEX, copper, CPVC 25-50+ years Generally low risk

With 87% of Washington Grove's homes built before 1986, a significant portion of residential plumbing may contain lead solder or aging pipe materials.

Carbon Monoxide & Gas Safety

12 CO/gas incidents have been recorded in the county covering Washington Grove. The average CO risk score is 49 out of 100.

Carbon monoxide is odorless and colorless - it is the leading cause of poisoning deaths in the U.S. Risk factors include:

  • Gas furnaces, water heaters, and stoves
  • Attached garages
  • Blocked chimneys or vents
  • Portable generators used indoors

Prevention:

  • Install CO detectors on every level, especially near bedrooms
  • Have gas appliances inspected annually
  • Never run generators, grills, or cars in enclosed spaces
  • Replace CO detectors every 5-7 years

What Homeowners Can Do

Pipe Inspection

  • Hire a licensed plumber to inspect your service line and interior plumbing
  • Check for discolored water (brown/orange = rust; white/cloudy = air or sediment)
  • Test water pressure - low pressure may indicate buildup in aging pipes
  • Look for visible corrosion on exposed pipes in basement or utility areas

Water Heater Maintenance

  • Flush your water heater annually to remove sediment
  • Check the anode rod every 2-3 years (prevents tank corrosion)
  • Set temperature to 120F to prevent scalding and reduce energy use
  • Replace water heaters older than 10-15 years proactively

CO Detector Placement

  • One detector per floor, minimum
  • Within 10 feet of each bedroom door
  • Near attached garage and utility room
  • 5 feet above the floor (CO rises with warm air) or on the ceiling
  • Not near windows, doors, or HVAC vents (air movement causes false readings)

Washington Grove vs. Nearby Maryland Cities

How Washington Grove's infrastructure compares to nearby cities:

City Water Systems Violations Population
Washington Grove 1 0 590
Cooksville 0 N/A 587
Secretary 0 N/A 598
Kitzmiller 0 N/A 605

ZIP Codes in Washington Grove

Washington Grove covers 1 ZIP code served by 1 water system. Infrastructure condition varies by ZIP code based on housing age, pipe material, and water system maintenance. Check your specific ZIP code for localized data.

Data Sources

  • Water systems: EPA ECHO - Enforcement and Compliance History Online
  • Infrastructure risk: Derived model (housing age, violation history, system assessments)
  • Housing age: U.S. Census Bureau American Community Survey (ACS)
  • CO/gas incidents: NTSB, PHMSA pipeline incident reports

Source reporting periods vary. See each cited source for its publication schedule.

Infrastructure Risk by ZIP Code in Washington Grove

Washington Grove is covered by a single ZIP code, so one infrastructure profile applies citywide. Risk within it still depends on system age, pipe materials, and violation history.

ZIP Code Grade Score Violations
20880 C 67/100 0 View report →

Check your water system's infrastructure

Infrastructure risk varies by ZIP code and water system. Enter your ZIP for a personalized infrastructure assessment.

Check Your Infrastructure Risk

Frequently Asked Questions

How old are the pipes in Washington Grove?
The median home build year in Washington Grove is 1957, making typical plumbing infrastructure about 69 years old. Pipes older than 40-50 years have elevated risk of corrosion, leaks, and lead contamination.
Is Washington Grove's water infrastructure safe?
The heuristic infrastructure stress indicator is 60/100, in the high model band. It does not predict pipe or system failures.
Is there CO or gas leak risk in Washington Grove?
Washington Grove has recorded 12 CO/gas incidents from NTSB data. Homes in the area should have working CO detectors and regular gas line inspections.
What is the infrastructure stress indicator for Washington Grove?
The average heuristic infrastructure stress indicator for Washington Grove is 60/100. It combines model inputs and does not estimate the likelihood of pipe deterioration.
How many water systems serve Washington Grove?
Washington Grove is served by 1 public water system across 1 ZIP code. Multiple systems mean water quality and infrastructure condition can vary by neighborhood.
HomeCitiesMarylandWashington Grove, MD → Infrastructure

Get safety alerts for Washington Grove, Maryland

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool - no phone call required.