Water Quality in Perry Point, MD: No Violations — Grade B
Grade B · Score 83/100 · 1 water system · Updated 2026-05-03
Perry Point's water is mostly safe. Minor violations exist but are primarily monitoring-related.
Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03
Perry Point, MD — clean EPA record, 1 water system, zero violations.
Water Quality by ZIP Code in Perry Point
Water quality varies across Perry Point's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | Grade | Score | Violations | Health | |
|---|---|---|---|---|---|
| 21902 | B | 83 | 0 | 0 | View report → |
Water Quality Overview
Perry Point, Maryland receives a water quality grade of B with an overall score of 83 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).
No EPA violations have been recorded for the 1 water system serving Perry Point. This is a positive indicator, though it does not guarantee the absence of all contaminants — some substances (like PFAS) are not yet fully regulated.
What Grade B Means
A grade of B indicates good compliance with EPA drinking water standards. While not perfect, Perry Point's water systems meet the vast majority of federal requirements. Minor violations may exist but typically relate to monitoring or reporting rather than health-based standards.
Lead Levels
The average 90th percentile lead level across Perry Point water systems is 0.0010 mg/L — within EPA limits. No ZIP codes exceed the EPA lead action level.
With 60% of homes built before 1986, Perry Point has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.
Radon Risk
Perry Point is in EPA Radon Zone 2 (Moderate risk). Testing is recommended, especially for homes with basements or ground-level living spaces.
Water Systems Serving Perry Point
Perry Point is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 2,000 people across 1 ZIP codes.
Each water system is identified by a Public Water System ID (PWSID) and is required to:
- Test for over 90 regulated contaminants on a regular schedule
- Report results to the EPA and state regulators
- Issue an annual Consumer Confidence Report (CCR) to all customers
- Take corrective action when violations occur
How to Check Your Water in Perry Point
Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores
Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants
Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel
Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics
Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts
Perry Point vs. Nearby Maryland Cities
How Perry Point's water quality compares to similar cities in Maryland:
| City | Grade | Violations | Systems | Population |
|---|---|---|---|---|
| Perry Point | B | 0 | 1 | 2,000 |
| Sykesville | C | 8 | 2 | 1,950 |
| Big Pool | D | 0 | 1 | 1,921 |
| Hancock | C | 2 | 1 | 1,921 |
Common Questions About Perry Point Water
These are the most common questions residents search for about water quality in Perry Point, Maryland:
Is Perry Point water hard or soft? Water hardness varies by source. Perry Point's 1 water system uses a single source. Check your ZIP code report for specific hardness data.
Can I drink Perry Point tap water? Perry Point's water receives a grade of B (83/100). No health-based violations have been recorded, but home testing is always recommended.
What is the best water filter for Perry Point? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.
Perry Point vs. Maryland Average
Understanding how Perry Point compares to the broader Maryland average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.
To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Perry Point.
ZIP Codes in Perry Point
Perry Point spans 1 ZIP code. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
- Enforcement: EPA ECHO database
- Filter recommendations: NSF/ANSI certified products
Updated daily.
Frequently Asked Questions
Your Water is Safe — Here's How to Keep It That Way
Grade B is excellent news. Here's what proactive homeowners do to maintain water quality:
Annual Water Testing
EPA recommends annual testing even with clean water. Home test kits: $20-$50. Catches changes before they become problems.
Maintenance Filtration
A basic carbon filter removes chlorine taste and catches emerging contaminants like PFAS that aren't yet fully regulated.
Plumbing Check
Even safe city water picks up lead from home pipes. If your home was built before 1986, a one-time pipe inspection is recommended.