CITY REPORT MD

Hancock, MD: 2 Violations — 63/100 (2026)

1 ZIP code · 1 water system · Updated 2026-06-03

Unlike higher-rated cities in MD, Hancock carries a fair number of documented violations — the pattern of compliance gaps keeps the city in the middle tier of EPA safety rankings.

How Hancock Compares

Hancock63/100
Maryland avg61/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
1
Water Systems
1
ZIPs with Violations
C · 63
Avg Safety Score
Zone 1
Radon Risk (High)
$213K
Median Home Value
$2,400
Est. Remediation (1.1% of home value)

Key Facts for Hancock Residents

  • Your city's water systems recorded 2 violations in the past 5 years.
  • Average lead level: 0.0024 mg/L.
  • Homes built before 1986: 75% — older plumbing may contain lead solder.
  • Estimated remediation: $2,400 per household.
  • CDC health risk index: 14.16 — above typical levels.

Hancock's Water Providers

Across most of Hancock, MD, residential water comes from a single utility. That provider sets rates, manages infrastructure maintenance, and files compliance reports with the EPA on behalf of the households it serves. Federal tracking data shows 1 system on record, but one carries the bulk of the service load.

Town of Hancock
Serves ~1,921 people · 2 violations
63
/100

Overview

We track water quality and home safety data for 1 ZIP code in Hancock, Maryland, covering 1 community water system serving approximately 3,585 people.

1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.

Home Safety Score

Average Home Safety Score for Hancock: C (63/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Hancock water systems draw from: Groundwater.

Lead & Copper

  • Average lead level (90th percentile): 0.0024 mg/L (EPA action level: 0.015 mg/L)
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Top Contaminants

Contaminant Category Violations ZIPs Affected
Stage 1 DBP Rule Treatment Technique 2 1
Stage 2 DBP Rule Treatment Technique 2 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
21750 C 2 0 Town of Hancock

All ZIP Codes in Hancock

  • 21750 [C] — 2 violations

Data Sources

Updated daily.

Hancock Community Health Snapshot

10.7%
Asthma (US: 9.8%)
13.3%
Diabetes (US: 10.4%)
16.9%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 10.7% ↑
Diabetes 13.3% ↑
Mental Health 16.9% ↑

Vertical line = national average. Above national · Below national

What's in Hancock's Water?

Stage 1 DBP Rule 2 violations
Treatment Technique
Disinfection byproduct exposure risk
Stage 2 DBP Rule 2 violations
Treatment Technique
Disinfection byproduct exposure risk

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

Hancock Infrastructure Age

1961
Median Build Year
75%
Built Before 1986
39%
Built Before 1970
Galvanized Steel or Copper
Likely Pipe Material

With 75% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

Hancock's housing stock is predominantly older, with a median build year of 1961 that reflects decades of construction before federal plumbing standards were tightened. The 1986 ban on lead solder and the pre-1970 era of lead service lines are both relevant benchmarks here — a significant share of the residential inventory predates one or both of those cutoffs, creating an elevated baseline for plumbing-related lead risk that aggregate water quality data may not fully reflect at the household level.

1961
Median Year Built
75%
Pre-1986 (Lead Paint Risk)
39%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (39%) 1970–1986 (36%) Post-1986 (25%)

Over half of homes in Hancock were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.

Source: U.S. Census Bureau ACS B25034.

How Remediation Costs Compare in Hancock

Homeowners in Hancock are working with a moderate equity share for documented remediation — the commitment deserves a line in the household budget, not dismissal.

Median Home Value
$212,700
Est. Remediation
$2,400
Remediation as % of home value 1.1%

Remediation costs are moderate relative to home values in Hancock. The estimated $1,600–$3,300 range is manageable for most homeowners but still worth budgeting for. Home values are 50% below the Maryland average.

Hancock: Lead Risk & Vulnerable Populations

75%
Homes Built Before 1986
0.0024
mg/L Avg Lead (Limit: 0.015)

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

Before the federal solder ban, lead solder was a routine plumbing material, and 75% of the Hancock inventory was built in that earlier era — a share large enough to move household-level reads onto the standard list.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Hancock: Flood History & Water Damage Risk

Multiple flood events have been recorded for Hancock through the NFIP — 29 claims in total, with 100% of ZIP codes in FEMA-designated zones — pointing to a flood exposure profile that merits inclusion in a water quality assessment without reaching high-severity planning territory.

29
Total FEMA Flood Claims
$17,066
Avg Claim Payout
100%
ZIPs in FEMA Flood Zones
~1
Est. Claims/Year

Hancock has a moderate flood history with 29 FEMA claims averaging $17,066 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$2,400</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

What You Can Do in Hancock

  1. Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
  2. Install a certified water filter. Filters rated for Stage 1 DBP Rule can reduce the most common contaminant found in Hancock's water.
  3. Check your home's plumbing. With 75% of homes built before 1986, lead solder is a real possibility.

Frequently Asked Questions

Is the water safe to drink in Hancock, MD?
Hancock has an average water safety score of 63/100 (Grade C). 2 EPA violations have been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does Hancock have?
Hancock water systems have a total of 2 EPA violations. Violations are tracked across 1 ZIP code.
Does Hancock water have lead?
The average 90th-percentile lead level in Hancock is 0.0024 mg/L. This is below the EPA action level of 0.015 mg/L. Lead levels can vary by home — testing is recommended especially in older properties.
How does Hancock compare to Maryland average?
Hancock has an average water safety score of 63/100, which is above the Maryland state average of 61/100.
How many water systems serve Hancock?
Hancock is served by 1 public water system across 1 ZIP code, serving approximately 3,585 people.
How much does it cost to fix water issues in Hancock?
Estimated remediation costs in Hancock average $2,400 per household, ranging from $1,600 to $3,300. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesMaryland → Hancock, MD

Get safety alerts for Hancock, Maryland

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.