Bivalve, MD Water Safety: 63/100 (2026)
1 ZIP code · 1 water system · Updated 2026-06-03
Based on current EPA data, Bivalve, MD reflects fair but uneven tap water safety.
How Bivalve Compares
Data: EPA SDWIS Last verified: 2026-06-03
Key Facts for Bivalve Residents
- Homes built before 1986: 100% — older plumbing may contain lead solder.
- Estimated remediation: $1,600 per household.
- CDC health risk index: 13.44 — above typical levels.
Bivalve's Water Providers
With one provider handling most of Bivalve's residential supply in MD, water service accountability is concentrated in a single utility among the 1 system on record.
Overview
We track water quality and home safety data for 1 ZIP code in Bivalve, Maryland (population ~205), covering 1 community water system serving approximately 3,300 people region-wide.
No EPA violations recorded across any ZIP codes in Bivalve — an excellent indicator of water quality.
Home Safety Score
Average Home Safety Score for Bivalve: C (63/100)
The score combines three factors:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| Lead Levels | 90th percentile lead concentration vs EPA action level |
| Radon Risk | EPA radon zone classification |
Water Sources
Bivalve water systems draw from: Groundwater.
Lead & Copper
- Lead data: not yet available for Bivalve
- 0 ZIP codes exceed the EPA lead action level
Radon Risk
Dominant radon zone: Zone 2 (Moderate Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Areas with No Violations
| ZIP Code | Safety Score | System | Population |
|---|---|---|---|
| 21814 | C | TOWN OF PRINCESS ANNE | 3,300 |
All ZIP Codes in Bivalve
- 21814 [C]
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Updated daily.
Bivalve Community Health Snapshot
Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.
Compared to National Average
Vertical line = national average. ■ Above national · ■ Below national
Bivalve Infrastructure Age
With 100% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
The lead that enters tap water in older homes often comes not from the municipal supply but from the home's own plumbing — from solder used in copper joints before the 1986 federal ban, or from lead pipes installed before 1970. In Bivalve, where the median build year is 1963, these older materials are widespread. More than half the residential stock predates the 1986 solder ban, and a significant fraction predates 1970 as well. For residents in those homes, the city-wide water quality picture is a less relevant frame than the specific materials inside their own walls and under their own street.
Over half of homes in Bivalve were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.
Source: U.S. Census Bureau ACS B25034.
Bivalve: Lead Risk & Vulnerable Populations
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Locally, 100% of Bivalve homes carry interior plumbing from the era when lead solder was still permitted in new builds, and citywide monitoring approaches or crosses the EPA action benchmark. Households can find a draw-test kit and certified filtration through verified retailers.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Bivalve: Flood History & Water Damage Risk
Although Bivalve's flood history doesn't reach high-severity thresholds, NFIP data documents 5 claims and FEMA maps place 100% of ZIP codes in designated flood zones — a combined profile that makes flood-related water quality considerations a reasonable planning baseline.
Bivalve has a moderate flood history with 5 FEMA claims averaging $18,298 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$1,600</strong> remediation cost per household.
Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.
Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.
What You Can Do in Bivalve
- Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
- Install a certified water filter. An NSF-certified pitcher or under-sink filter removes most common contaminants.
- Check your home's plumbing. With 100% of homes built before 1986, lead solder is a real possibility.
Deep Dive Reports
Detailed analysis for Bivalve, MD