Water Quality in Danvers, MA: 1 Violation — Grade C
Grade C · Score 63/100 · 1 water system · Updated 2026-05-03
Danvers's water has moderate compliance issues. Residents in affected areas should consider filtration.
Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03
On record with EPA: Danvers, MA has 1 water violation.
Water Quality by ZIP Code in Danvers
Water quality varies across Danvers's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | Grade | Score | Violations | Health | |
|---|---|---|---|---|---|
| 01923 | C | 63 | 1 | 0 | View report → |
Water Quality Overview
Danvers, Massachusetts receives a water quality grade of C with an overall score of 63 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).
The 1 water system serving Danvers have accumulated 1 EPA violations (all monitoring/reporting type). These violations are tracked across 1 ZIP codes serving approximately 28,087 people.
What Grade C Means
A grade of C indicates moderate compliance issues. Danvers's water systems have some violations that warrant attention. While the water may still be safe for most people, residents in affected ZIP codes should consider additional testing or filtration.
Lead Levels
The average 90th percentile lead level across Danvers water systems is 0.0047 mg/L — within EPA limits. No ZIP codes exceed the EPA lead action level.
With 78% of homes built before 1986, Danvers has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.
Radon Risk
Danvers is in EPA Radon Zone 1 (High risk). The EPA recommends all homes in Zone 1 areas be tested for radon. Radon is the second leading cause of lung cancer after smoking.
Water Systems Serving Danvers
Danvers is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 28,087 people across 1 ZIP codes.
Each water system is identified by a Public Water System ID (PWSID) and is required to:
- Test for over 90 regulated contaminants on a regular schedule
- Report results to the EPA and state regulators
- Issue an annual Consumer Confidence Report (CCR) to all customers
- Take corrective action when violations occur
The EPA has taken 1 enforcement action against water systems serving Danvers. Enforcement actions range from informal compliance assistance to formal orders and penalties.
How to Check Your Water in Danvers
Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores
Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants
Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel
Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics
Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts
Contaminants Detected in Danvers Water Systems
The following contaminants have been detected or caused violations across Danvers's water systems:
| Contaminant | Category | MCL | Violations | ZIPs Affected | Health-Based |
|---|---|---|---|---|---|
| Stage 1 DBP Rule | Treatment Technique | N/A | 1 | 1 | No |
MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.
EPA Enforcement History
The EPA and state regulators have taken 1 enforcement action against water systems serving Danvers. Recent actions:
| Date | Action Type |
|---|---|
| 2025-11-26 | State Filed Suit |
Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2025-11-26.
Danvers vs. Nearby Massachusetts Cities
How Danvers's water quality compares to similar cities in Massachusetts:
| City | Grade | Violations | Systems | Population |
|---|---|---|---|---|
| Danvers | C | 1 | 1 | 28,087 |
| Hathorne | D | 0 | 1 | 28,087 |
| Buzzards Bay | D | 0 | 2 | 27,892 |
| Siasconset | D | 0 | 1 | 27,703 |
Common Questions About Danvers Water
These are the most common questions residents search for about water quality in Danvers, Massachusetts:
Is Danvers water hard or soft? Water hardness varies by source. Danvers's 1 water system uses a single source. Check your ZIP code report for specific hardness data.
Can I drink Danvers tap water? Danvers's water receives a grade of C (63/100). No health-based violations have been recorded, but home testing is always recommended.
What is the best water filter for Danvers? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.
Danvers vs. Massachusetts Average
Understanding how Danvers compares to the broader Massachusetts average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.
To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Danvers.
ZIP Codes in Danvers
Danvers spans 1 ZIP code. The ZIP with the lowest water quality score is 01923. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
- Enforcement: EPA ECHO database
- Filter recommendations: NSF/ANSI certified products
Updated daily.