WATER QUALITY KY

Water Quality in Russellville, KY: 2 Violations — Grade C

Grade C · Score 69/100 · 2 water systems · Updated 2026-05-03

Russellville's water has moderate compliance issues. Residents in affected areas should consider filtration.

Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03

Federal EPA data for Russellville, KY shows 2 water compliance events in the record — the table below identifies system names and violation types.

C
Water Grade
2
Total Violations
2
Water Systems
1
ZIPs with Violations
1
ZIP Codes Monitored
8
Enforcement Actions

Water Quality by ZIP Code in Russellville

Water quality varies across Russellville's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.

ZIP Code Grade Score Violations Health
42276 C 69 2 0 View report →

Water Quality Overview

Russellville, Kentucky receives a water quality grade of C with an overall score of 69 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).

The 2 water systems serving Russellville have accumulated 2 EPA violations (all monitoring/reporting type). These violations are tracked across 1 ZIP codes serving approximately 10,262 people.

What Grade C Means

A grade of C indicates moderate compliance issues. Russellville's water systems have some violations that warrant attention. While the water may still be safe for most people, residents in affected ZIP codes should consider additional testing or filtration.

Lead Levels

Lead testing data for Russellville is currently being collected. The EPA requires all community water systems to test for lead under the Lead and Copper Rule.

With 68% of homes built before 1986, Russellville has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.

Radon Risk

Russellville is in EPA Radon Zone 2 (Moderate risk). Testing is recommended, especially for homes with basements or ground-level living spaces.

Water Systems Serving Russellville

Russellville is served by 2 community water systems regulated under the Safe Drinking Water Act. These systems collectively serve approximately 10,262 people across 1 ZIP codes.

Each water system is identified by a Public Water System ID (PWSID) and is required to:

  • Test for over 90 regulated contaminants on a regular schedule
  • Report results to the EPA and state regulators
  • Issue an annual Consumer Confidence Report (CCR) to all customers
  • Take corrective action when violations occur

The EPA has taken 8 enforcement actions against water systems serving Russellville. Enforcement actions range from informal compliance assistance to formal orders and penalties.

How to Check Your Water in Russellville

  1. Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores

  2. Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants

  3. Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel

  4. Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics

  5. Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts

Contaminants Detected in Russellville Water Systems

The following contaminants have been detected or caused violations across Russellville's water systems:

Contaminant Category MCL Violations ZIPs Affected Health-Based
Surface Water Treatment Rule Treatment Technique N/A 1 1 No
Total Trihalomethanes (TTHM) Disinfection Byproducts 0.08 mg/L 1 1 No

MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.

EPA Enforcement History

The EPA and state regulators have taken 8 enforcement actions against water systems serving Russellville. Recent actions:

Date Action Type
2023-05-11 State Informal Action
2022-12-30 State Order Extension
2022-11-10 State Filed Judgment
2022-11-10 State Informal Enforcement
2022-06-24 State Order Extension
2021-10-28 State Filed Judgment
2021-04-28 State Filed Judgment
2021-03-23 State Order Extension

Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2023-05-11.

Russellville vs. Nearby Kentucky Cities

How Russellville's water quality compares to similar cities in Kentucky:

City Grade Violations Systems Population
Russellville C 2 2 10,262
Farmers C 0 1 10,083
Olympia D 0 1 10,083
Salt Lick B 2 1 10,083

Common Questions About Russellville Water

These are the most common questions residents search for about water quality in Russellville, Kentucky:

Is Russellville water hard or soft? Water hardness varies by source. Russellville's 2 water systems use multiple sources. Check your ZIP code report for specific hardness data.

Can I drink Russellville tap water? Russellville's water receives a grade of C (69/100). No health-based violations have been recorded, but home testing is always recommended.

What is the best water filter for Russellville? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.

Russellville vs. Kentucky Average

Understanding how Russellville compares to the broader Kentucky average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.

To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Russellville.

ZIP Codes in Russellville

Russellville spans 1 ZIP code. The ZIP with the lowest water quality score is 42276. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.

Data Sources

Updated daily.

Frequently Asked Questions

Is Russellville tap water safe to drink?
Russellville's water receives a grade of C (69/100). Some areas have recorded violations — residents in affected ZIP codes may want to consider water testing.
What contaminants are found in Russellville water?
Russellville water systems have recorded 2 total violations, including 0 health-based violations. Specific contaminants vary by ZIP code — check your ZIP report for details on detected substances.
How many water violations does Russellville have?
Russellville has 2 total EPA violations across 2 water systems. 1 of 1 ZIP codes have at least one violation.
How many water systems serve Russellville?
Russellville is served by 2 public water systems supplying drinking water across 1 ZIP codes. Water quality can vary between systems — check your specific ZIP code for localized data.
HomeCitiesKentuckyRussellville, KY → Water Quality

Get safety alerts for Russellville, Kentucky

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.