Marysville, KS: 2 Violations — 63/100 (2026)
1 ZIP code · 3 water systems · Updated 2026-06-04
In recent monitoring cycles, Marysville tap water shows a mixed record for KS — several systems have documented violations alongside areas with clean compliance histories.
How Marysville Compares
Data: EPA SDWIS Last verified: 2026-06-04
Key Facts for Marysville Residents
- Your city's water systems recorded 2 violations in the past 5 years.
- Average lead level: 0.0025 mg/L.
- Homes built before 1986: 79% — older plumbing may contain lead solder.
- Estimated remediation: $2,400 per household.
- CDC health risk index: 14.71 — above typical levels.
Marysville's Water Providers
Residential water in Marysville, KS is supplied by 3 separate utilities — not one centralized authority. Each of those providers operates under its own service territory boundary, maintains its own distribution infrastructure, and files compliance documentation with the EPA on its own timeline. Federal data counts 3 water systems in the area, with these providers collectively accounting for the dominant share of household connections.
Overview
We track water quality and home safety data for 1 ZIP code in Marysville, Kansas, covering 3 community water systems serving approximately 4,020 people.
1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.
Home Safety Score
Average Home Safety Score for Marysville: C (63/100)
The score combines three factors:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| Lead Levels | 90th percentile lead concentration vs EPA action level |
| Radon Risk | EPA radon zone classification |
Water Sources
Marysville water systems draw from: Groundwater.
Lead & Copper
- Average lead level (90th percentile): 0.0025 mg/L (EPA action level: 0.015 mg/L)
- 0 ZIP codes exceed the EPA lead action level
Radon Risk
Dominant radon zone: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Top Contaminants
| Contaminant | Category | Violations | ZIPs Affected |
|---|---|---|---|
| Stage 2 DBP Rule | Treatment Technique | 4 | 1 |
Areas with Most Violations
| ZIP Code | Safety Score | Violations | Health-Based | System |
|---|---|---|---|---|
| 66508 | C | 2 | 0 | City of Marysville, |
All ZIP Codes in Marysville
- 66508 [C] — 2 violations
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Updated daily.
Marysville Community Health Snapshot
Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.
Compared to National Average
Vertical line = national average. ■ Above national · ■ Below national
What's in Marysville's Water?
Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.
Marysville Infrastructure Age
With 79% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
While newer cities carry lower aggregate plumbing risk from lead-era construction, Marysville sits firmly in the older category. The median build year of 1952 indicates that more than half the housing stock was built before 1986, when lead solder was still legally used in residential copper plumbing — and a substantial portion likely predates 1970, when lead pipes were still commonly installed for service lines. These two thresholds together define the elevated plumbing risk environment that older housing cities carry, independent of what the municipal water supply delivers to the meter.
Over half of homes in Marysville were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.
Source: U.S. Census Bureau ACS B25034.
How Remediation Costs Compare in Marysville
The Marysville equity share sits above the low tier but short of the range where remediation becomes a heavy financial burden — the cost-to-value ratio is moderate, and deliberate planning is the key practical lever for most homeowners.
Remediation costs are moderate relative to home values in Marysville. The estimated $1,600–$3,300 range is manageable for most homeowners but still worth budgeting for. Home values are 15% below the Kansas average.
Marysville: Lead Risk & Vulnerable Populations
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Although utility-side compliance with federal Lead and Copper requirements remains the system reference, that compliance does not extend down into interior plumbing. With 79% of Marysville stock built before the solder ban and aggregate readings at or beyond the action mark, a household-level sample becomes the practical way to close that information gap.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Marysville: Flood History & Water Damage Risk
Marysville's flood exposure sits in the moderate range: 27 NFIP claims on record and 100% of ZIP codes within FEMA-designated flood zones. Residents with private wells or older infrastructure have reasonable grounds to factor flood timing into their water quality awareness.
Marysville has a moderate flood history with 27 FEMA claims averaging $3,766 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$2,400</strong> remediation cost per household.
Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.
Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.
What You Can Do in Marysville
- Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
- Install a certified water filter. Filters rated for Stage 2 DBP Rule can reduce the most common contaminant found in Marysville's water.
- Check your home's plumbing. With 79% of homes built before 1986, lead solder is a real possibility.
Deep Dive Reports
Detailed analysis for Marysville, KS