WATER QUALITY KS

Water Quality in Belpre, KS: 4 Violations — Grade D

Grade D · Score 49/100 · 1 water system · Updated 2026-05-03

Belpre's water has significant violations. Water testing and filtration are recommended.

Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03

Reviewing EPA compliance files for Belpre, KS surfaces 4 documented water violations — each categorized by violation type and linked to the utility that drew the federal citation.

D
Water Grade
4
Total Violations
1
Water Systems
1
ZIPs with Violations
1
ZIP Codes Monitored
6
Enforcement Actions

Water Quality by ZIP Code in Belpre

Water quality varies across Belpre's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.

ZIP Code Grade Score Violations Health
67519 D 49 4 0 View report →

Water Quality Overview

Belpre, Kansas receives a water quality grade of D with an overall score of 49 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).

The 1 water system serving Belpre have accumulated 4 EPA violations (all monitoring/reporting type). These violations are tracked across 1 ZIP codes serving approximately 98 people.

What Grade D Means

A grade of D indicates significant compliance issues. Belpre's water systems have accumulated violations that suggest ongoing water quality challenges. Residents should check their specific ZIP code report and consider water testing or filtration.

Lead Levels

The average 90th percentile lead level across Belpre water systems is 0.0134 mg/L — within EPA limits. No ZIP codes exceed the EPA lead action level.

With 100% of homes built before 1986, Belpre has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.

Radon Risk

Belpre is in EPA Radon Zone 2 (Moderate risk). Testing is recommended, especially for homes with basements or ground-level living spaces.

Water Systems Serving Belpre

Belpre is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 98 people across 1 ZIP codes.

Each water system is identified by a Public Water System ID (PWSID) and is required to:

  • Test for over 90 regulated contaminants on a regular schedule
  • Report results to the EPA and state regulators
  • Issue an annual Consumer Confidence Report (CCR) to all customers
  • Take corrective action when violations occur

The EPA has taken 6 enforcement actions against water systems serving Belpre. Enforcement actions range from informal compliance assistance to formal orders and penalties.

How to Check Your Water in Belpre

  1. Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores

  2. Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants

  3. Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel

  4. Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics

  5. Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts

Contaminants Detected in Belpre Water Systems

The following contaminants have been detected or caused violations across Belpre's water systems:

Contaminant Category MCL Violations ZIPs Affected Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 0.08 mg/L 2 1 No
Lead and Copper Rule Treatment Technique N/A 1 1 No
Stage 2 DBP Rule Treatment Technique N/A 1 1 No

MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.

EPA Enforcement History

The EPA and state regulators have taken 6 enforcement actions against water systems serving Belpre. Recent actions:

Date Action Type
2025-03-17 State Informal Action
2025-03-17 State Informal Enforcement
2024-11-18 State Informal Action
2024-11-18 State Informal Enforcement
2021-02-09 State Informal Action
2021-02-09 State Order Extension

Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2025-03-17.

Belpre vs. Nearby Kansas Cities

How Belpre's water quality compares to similar cities in Kansas:

City Grade Violations Systems Population
Belpre D 4 1 98
Rozel C 4 1 98
Green C 1 1 97
Munden C 2 1 99

Common Questions About Belpre Water

These are the most common questions residents search for about water quality in Belpre, Kansas:

Is Belpre water hard or soft? Water hardness varies by source. Belpre's 1 water system uses a single source. Check your ZIP code report for specific hardness data.

Can I drink Belpre tap water? Belpre's water receives a grade of D (49/100). No health-based violations have been recorded, but home testing is always recommended.

What is the best water filter for Belpre? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.

Belpre vs. Kansas Average

Understanding how Belpre compares to the broader Kansas average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.

To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Belpre.

ZIP Codes in Belpre

Belpre spans 1 ZIP code. The ZIP with the lowest water quality score is 67519. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.

Data Sources

Updated daily.

Frequently Asked Questions

Is Belpre tap water safe to drink?
Belpre's water receives a grade of D (49/100). 0 health-based violations have been recorded. Independent water testing and filtration are recommended.
What contaminants are found in Belpre water?
Belpre water systems have recorded 4 total violations, including 0 health-based violations. Specific contaminants vary by ZIP code — check your ZIP report for details on detected substances.
How many water violations does Belpre have?
Belpre has 4 total EPA violations across 1 water system. 1 of 1 ZIP codes have at least one violation.
How many water systems serve Belpre?
Belpre is served by 1 public water system supplying drinking water across 1 ZIP codes. Water quality can vary between systems — check your specific ZIP code for localized data.
HomeCitiesKansasBelpre, KS → Water Quality

Get safety alerts for Belpre, Kansas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.