Infrastructure Risk in Baxter Springs, KS: High
Decay risk 55% · high · 2 water systems · Updated 2026-05-03
Baxter Springs's infrastructure has high decay risk. Aging pipes and systems may be prone to failures.
Data: EPA ECHO, Census ACS, NTSB Last verified: 2026-05-03
What is infrastructure decay probability?
Infrastructure decay probability estimates the likelihood of water pipe deterioration based on pipe age, material type, violation history, and environmental conditions. Higher probability means greater risk of water main breaks, pressure drops, and contamination from aging pipes. The national average hovers around 30-40%. Baxter Springs's average is 55%.
Infrastructure Risk Distribution
How Baxter Springs's {totalZips} ZIP codes are distributed by infrastructure risk level:
Infrastructure Risk Overview
Baxter Springs, Kansas has high infrastructure risk with an average decay probability of 55%. Significant portions of the water system are aging and may be at risk of failure.
Infrastructure decay probability measures the likelihood of pipe failure, water main breaks, and system degradation based on pipe age, material, violation history, and environmental factors.
Key Infrastructure Metrics
| Metric | Value |
|---|---|
| Decay probability | 55% |
| Risk level | high |
| Water systems | 2 |
| Median build year | 1950 |
| Pre-1986 housing | 76% |
| CO/gas incidents | 0 |
| ZIP codes | 1 |
| Population | 5,752 |
Infrastructure Risk Distribution
How Baxter Springs's 1 ZIP codes are distributed by infrastructure risk level:
| Risk Level | ZIP Codes | Percentage |
|---|---|---|
| Low | 0 | 0% |
| Moderate | 0 | 0% |
| High | 1 | 100% |
| Very High | 0 | 0% |
100% of Baxter Springs's ZIP codes are in the high or very-high risk category. This indicates widespread aging infrastructure that may be prone to failures.
Water System Age and Pipe Materials
The median home in Baxter Springs was built in 1950 (approximately 76 years old). Housing age is one of the strongest proxies for water infrastructure age, as service lines and interior plumbing were typically installed during construction.
Pipe material risks by era:
| Era | Common Pipe Material | Expected Lifespan | Key Risk |
|---|---|---|---|
| Pre-1940 | Lead, cast iron | 50-75 years | Lead contamination, corrosion |
| 1940-1960 | Galvanized steel, cast iron | 40-60 years | Rust, lead solder, reduced flow |
| 1960-1980 | Copper, galvanized steel | 50-70 years | Lead solder (pre-1986), pinhole leaks |
| 1980-2000 | Copper, PVC, CPVC | 25-50 years | Chlorine degradation of plastics |
| 2000+ | PEX, copper, CPVC | 25-50+ years | Generally low risk |
With 76% of Baxter Springs's homes built before 1986, a significant portion of residential plumbing may contain lead solder or aging pipe materials.
Carbon Monoxide & Gas Safety
No CO/gas incidents have been recorded in the county covering Baxter Springs. The average CO risk score is 0 out of 100.
Carbon monoxide is odorless and colorless — it is the leading cause of poisoning deaths in the U.S. Risk factors include:
- Gas furnaces, water heaters, and stoves
- Attached garages
- Blocked chimneys or vents
- Portable generators used indoors
Prevention:
- Install CO detectors on every level, especially near bedrooms
- Have gas appliances inspected annually
- Never run generators, grills, or cars in enclosed spaces
- Replace CO detectors every 5-7 years
What Homeowners Can Do
Pipe Inspection
- Hire a licensed plumber to inspect your service line and interior plumbing
- Check for discolored water (brown/orange = rust; white/cloudy = air or sediment)
- Test water pressure — low pressure may indicate buildup in aging pipes
- Look for visible corrosion on exposed pipes in basement or utility areas
Water Heater Maintenance
- Flush your water heater annually to remove sediment
- Check the anode rod every 2-3 years (prevents tank corrosion)
- Set temperature to 120F to prevent scalding and reduce energy use
- Replace water heaters older than 10-15 years proactively
CO Detector Placement
- One detector per floor, minimum
- Within 10 feet of each bedroom door
- Near attached garage and utility room
- 5 feet above the floor (CO rises with warm air) or on the ceiling
- Not near windows, doors, or HVAC vents (air movement causes false readings)
Baxter Springs vs. Nearby Kansas Cities
How Baxter Springs's infrastructure compares to nearby cities:
| City | Water Systems | Violations | Population |
|---|---|---|---|
| Baxter Springs | 2 | 13 | 5,752 |
| Beloit | 3 | 55 | 5,800 |
| Bucyrus | 1 | 0 | 5,694 |
| Spring Hill | 1 | 3 | 5,694 |
ZIP Codes in Baxter Springs
Baxter Springs covers 1 ZIP code served by 2 water systems. Infrastructure condition varies by ZIP code based on housing age, pipe material, and water system maintenance. Check your specific ZIP code for localized data.
Data Sources
- Water systems: EPA ECHO — Enforcement and Compliance History Online
- Infrastructure risk: Derived model (housing age, violation history, system assessments)
- Housing age: U.S. Census Bureau American Community Survey (ACS)
- CO/gas incidents: NTSB, PHMSA pipeline incident reports
Updated daily.
Infrastructure Risk by ZIP Code in Baxter Springs
Infrastructure risk varies across Baxter Springs's 1 ZIP codes based on system age, pipe materials, and violation history.
| ZIP Code | Grade | Score | Violations | |
|---|---|---|---|---|
| 66713 | C | 68/100 | 13 | View report → |
Check your water system's infrastructure
Infrastructure risk varies by ZIP code and water system. Enter your ZIP for a personalized infrastructure assessment.
Check Your Infrastructure Risk