Danville, IN: 1 Violation — 67/100 (2026)
1 ZIP code · 5 water systems · Updated 2026-06-03
Although much of Danville meets baseline drinking water standards, some IN-tracked service areas show violations that merit a closer look — particularly for older housing stock.
How Danville Compares
Data: EPA SDWIS Last verified: 2026-06-03
Key Facts for Danville Residents
- Your city's water systems recorded 1 violation in the past 5 years.
- Average lead level: 0.0055 mg/L.
- Homes built before 1986: 49% — older plumbing may contain lead solder.
- Estimated remediation: $2,900 per household.
- CDC health risk index: 12.39 — above typical levels.
Danville's Water Providers
Residential water service in Danville, IN is divided among 3 separate utilities, drawn from 5 systems on file with federal regulators.
Overview
We track water quality and home safety data for 1 ZIP code in Danville, Indiana (population ~16,343), covering 5 community water systems serving approximately 953,185 people region-wide.
1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.
Home Safety Score
Average Home Safety Score for Danville: C (67/100)
The score combines three factors:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| Lead Levels | 90th percentile lead concentration vs EPA action level |
| Radon Risk | EPA radon zone classification |
Water Sources
Danville water systems draw from: Surface water.
Lead & Copper
- Average lead level (90th percentile): 0.0055 mg/L (EPA action level: 0.015 mg/L)
- 0 ZIP codes exceed the EPA lead action level
Radon Risk
Dominant radon zone: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Top Contaminants
| Contaminant | Category | Violations | ZIPs Affected |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Technique | 2 | 1 |
Areas with Most Violations
| ZIP Code | Safety Score | Violations | Health-Based | System |
|---|---|---|---|---|
| 46122 | C | 1 | 0 | Danville Water Works |
All ZIP Codes in Danville
- 46122 [C] — 1 violation
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Updated daily.
Danville Community Health Snapshot
Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.
Compared to National Average
Vertical line = national average. ■ Above national · ■ Below national
What's in Danville's Water?
Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.
Danville Infrastructure Age
With 49% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
What does a median build year of 1983 mean for water safety in Danville? It means the housing stock straddles two key plumbing thresholds: the 1986 federal ban on lead solder in copper plumbing, and the pre-1970 era when lead pipes were commonly installed for service lines. A meaningful share of homes predates one or both of those cutoffs, creating varied risk levels across the city's housing inventory.
Most homes in Danville were built after 1986, reducing the risk of lead contamination from plumbing. Older homes should still be tested.
Source: U.S. Census Bureau ACS B25034.
How Remediation Costs Compare in Danville
For most Danville homeowners, estimated remediation represents a moderate equity share — manageable with planning.
Remediation costs are moderate relative to home values in Danville. The estimated $1,900–$4,100 range is manageable for most homeowners but still worth budgeting for. Home values are 55% above the Indiana average.
Danville: Lead Risk & Vulnerable Populations
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Reading the local data together points toward a structural gap that matters more here than in low-exposure communities. 49% of Danville stock comes from the pre-rule era, and citywide monitoring either approaches or sits beyond the federal benchmark under Lead and Copper Rule sampling. A baseline kit fits the routine-diligence category, with certified filtration available via retailer networks where confirmed faucet results warrant additional measures.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Danville: Flood History & Water Damage Risk
Taken together, Danville's 10 NFIP flood insurance claims and 100% FEMA flood zone coverage place it in the moderate range of exposure. That middle position has specific implications for water quality. The contamination pathways that flooding can open — surface water overwhelming treatment facility intake, floodwaters infiltrating private wells, distribution pressure changes creating backflow — are not constant risks in a moderate-exposure community. But they do become active during significant flood events, and the claim record here indicates enough of those events to make flood timing an occasional factor in local water quality conversations.
Danville has a moderate flood history with 10 FEMA claims averaging $11,835 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$2,900</strong> remediation cost per household.
Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.
Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.
What You Can Do in Danville
- Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
- Install a certified water filter. Filters rated for Surface Water Treatment Rule can reduce the most common contaminant found in Danville's water.
- Check your home's plumbing. With 49% of homes built before 1986, lead solder is a real possibility.
Deep Dive Reports
Detailed analysis for Danville, IN