CITY REPORT IN

Culver, IN: 1 Violation — 65/100 (2026)

1 ZIP code · 2 water systems · Updated 2026-06-03

Drilling into federal monitoring figures for Culver in IN, the pattern is middle-of-the-road — some utilities have documented MCL exceedances or treatment technique violations in recent years, while others have operated without a single flag, making the city's grade a genuine average rather than a rounded-down high.

How Culver Compares

Culver65/100
Indiana avg60/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
2
Water Systems
1
ZIPs with Violations
C · 65
Avg Safety Score
Zone 1
Radon Risk (High)
$219K
Median Home Value
$2,400
Est. Remediation (1.1% of home value)

What You Should Know About Culver Water

  • Your city's water systems recorded 1 violation in the past 5 years.
  • Average lead level: 0.0017 mg/L.
  • Homes built before 1986: 62% — older plumbing may contain lead solder.
  • Estimated remediation: $2,400 per household.
  • CDC health risk index: 15.67 — above typical levels.

Who Supplies Your Water in Culver

Culver, IN draws its residential water from 2 separate providers among the 2 federally tracked systems. Each operates independently, with its own infrastructure, rate structure, and compliance record.

Culver Educational Foundation
Serves ~1,940 people · 1 violation
65
/100
Culver Water Department
Serves ~1,391 people · 1 violation
65
/100

Overview

We track water quality and home safety data for 1 ZIP code in Culver, Indiana, covering 2 community water systems serving approximately 4,019 people.

1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.

Home Safety Score

Average Home Safety Score for Culver: C (65/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Culver water systems draw from: Groundwater.

Lead & Copper

  • Average lead level (90th percentile): 0.0017 mg/L (EPA action level: 0.015 mg/L)
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Top Contaminants

Contaminant Category Violations ZIPs Affected
Consumer Confidence Report Rule Reporting 2 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
46511 C 1 0 Culver Water Department

All ZIP Codes in Culver

  • 46511 [C] — 1 violation

Data Sources

Updated daily.

Health Outcomes in Culver

11.4%
Asthma (US: 9.8%)
14.6%
Diabetes (US: 10.4%)
18%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 11.4% ↑
Diabetes 14.6% ↑
Mental Health 18% ↑

Vertical line = national average. Above national · Below national

Top Contaminants in Culver Water

Consumer Confidence Report Rule 2 violations
Reporting

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

Housing & Infrastructure in Culver

1973
Median Build Year
62%
Built Before 1986
36%
Built Before 1970
Copper
Likely Pipe Material

With 62% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

Culver's housing stock is predominantly older, with a median build year of 1973 that reflects decades of construction before federal plumbing standards were tightened. The 1986 ban on lead solder and the pre-1970 era of lead service lines are both relevant benchmarks here — a significant share of the residential inventory predates one or both of those cutoffs, creating an elevated baseline for plumbing-related lead risk that aggregate water quality data may not fully reflect at the household level.

1973
Median Year Built
62%
Pre-1986 (Lead Paint Risk)
36%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (36%) 1970–1986 (26%) Post-1986 (38%)

Over half of homes in Culver were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.

Source: U.S. Census Bureau ACS B25034.

Cost Context: What Remediation Means for Culver Homeowners

Although the Culver remediation share is moderate, it remains reachable for most homeowners who plan for the expense in advance.

Median Home Value
$218,900
Est. Remediation
$2,400
Remediation as % of home value 1.1%

Remediation costs are moderate relative to home values in Culver. The estimated $1,600–$3,300 range is manageable for most homeowners but still worth budgeting for. Home values are 23% above the Indiana average.

Lead Exposure Risk for Children in Culver

62%
Homes Built Before 1986
0.0017
mg/L Avg Lead (Limit: 0.015)

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

Pulling a tap sample fills the gap that utility data cannot close, particularly here where 62% of housing dates from the pre-rule era and citywide monitoring sits at or above the regulatory mark in Culver.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Flood & Climate Risk in Culver

Multiple flood events have been recorded for Culver through the NFIP — 14 claims in total, with 100% of ZIP codes in FEMA-designated zones — pointing to a flood exposure profile that merits inclusion in a water quality assessment without reaching high-severity planning territory.

14
Total FEMA Flood Claims
$12,561
Avg Claim Payout
100%
ZIPs in FEMA Flood Zones
~1
Est. Claims/Year

Culver has a moderate flood history with 14 FEMA claims averaging $12,561 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$2,400</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

What You Can Do in Culver

  1. Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
  2. Install a certified water filter. Filters rated for Consumer Confidence Report Rule can reduce the most common contaminant found in Culver's water.
  3. Check your home's plumbing. With 62% of homes built before 1986, lead solder is a real possibility.

Frequently Asked Questions

Is the water safe to drink in Culver, IN?
Culver has an average water safety score of 65/100 (Grade C). 1 EPA violation has been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does Culver have?
Culver water systems have a total of 1 EPA violation. Violations are tracked across 1 ZIP code.
Does Culver water have lead?
The average 90th-percentile lead level in Culver is 0.0017 mg/L. This is below the EPA action level of 0.015 mg/L. Lead levels can vary by home — testing is recommended especially in older properties.
How does Culver compare to Indiana average?
Culver has an average water safety score of 65/100, which is above the Indiana state average of 60/100.
How many water systems serve Culver?
Culver is served by 2 public water systems across 1 ZIP code, serving approximately 4,019 people.
How much does it cost to fix water issues in Culver?
Estimated remediation costs in Culver average $2,400 per household, ranging from $1,600 to $3,300. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesIndiana → Culver, IN

Get safety alerts for Culver, Indiana

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.