Water Quality in Mark, IL: 3 Violations — Grade D
Grade D · Score 54/100 · 1 water system · Updated 2026-05-03
Mark's water has significant violations. Water testing and filtration are recommended.
Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03
Local water systems serving Mark, IL carry 3 EPA violations on record in the federal compliance database — documented events spanning categories from maximum contaminant level exceedances to monitoring requirements tracked by the national Safe Drinking Water program.
Water Quality by ZIP Code in Mark
Water quality varies across Mark's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | Grade | Score | Violations | Health | |
|---|---|---|---|---|---|
| 61340 | D | 54 | 3 | 1 | View report → |
Water Quality Overview
Mark, Illinois receives a water quality grade of D with an overall score of 54 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).
The 1 water system serving Mark have accumulated 3 EPA violations, including 1 health-based violation. These violations are tracked across 1 ZIP codes serving approximately 555 people.
What Grade D Means
A grade of D indicates significant compliance issues. Mark's water systems have accumulated violations that suggest ongoing water quality challenges. Residents should check their specific ZIP code report and consider water testing or filtration.
Lead Levels
Lead testing data for Mark is currently being collected. The EPA requires all community water systems to test for lead under the Lead and Copper Rule.
With 61% of homes built before 1986, Mark has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.
Radon Risk
Mark is in EPA Radon Zone 1 (High risk). The EPA recommends all homes in Zone 1 areas be tested for radon. Radon is the second leading cause of lung cancer after smoking.
Water Systems Serving Mark
Mark is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 555 people across 1 ZIP codes.
Each water system is identified by a Public Water System ID (PWSID) and is required to:
- Test for over 90 regulated contaminants on a regular schedule
- Report results to the EPA and state regulators
- Issue an annual Consumer Confidence Report (CCR) to all customers
- Take corrective action when violations occur
The EPA has taken 10 enforcement actions against water systems serving Mark. Enforcement actions range from informal compliance assistance to formal orders and penalties.
How to Check Your Water in Mark
Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores
Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants
Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel
Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics
Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts
Contaminants Detected in Mark Water Systems
The following contaminants have been detected or caused violations across Mark's water systems:
| Contaminant | Category | MCL | Violations | ZIPs Affected | Health-Based |
|---|---|---|---|---|---|
| Haloacetic Acids (HAA5) | Disinfection Byproducts | 0.06 mg/L | 1 | 1 | Yes |
| Lead and Copper Rule | Treatment Technique | N/A | 1 | 1 | No |
| Stage 1 DBP Rule | Treatment Technique | N/A | 1 | 1 | No |
MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.
EPA Enforcement History
The EPA and state regulators have taken 10 enforcement actions against water systems serving Mark. Recent actions:
| Date | Action Type |
|---|---|
| 2024-03-07 | State Order Extension |
| 2023-06-02 | State Informal Action |
| 2022-10-17 | State Informal Action |
| 2022-10-17 | State Informal Enforcement |
| 2022-09-09 | State Order Extension |
| 2022-08-26 | State Formal Action |
| 2022-08-26 | State Filed Suit |
| 2022-07-13 | State Informal Action |
| 2022-07-12 | State Informal Action |
| 2022-07-12 | State Order Extension |
Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2024-03-07.
Mark vs. Nearby Illinois Cities
How Mark's water quality compares to similar cities in Illinois:
| City | Grade | Violations | Systems | Population |
|---|---|---|---|---|
| Mark | D | 3 | 1 | 555 |
| Augusta | C | 0 | 1 | 553 |
| Sidell | C | 1 | 1 | 557 |
| Grand Tower | B | 0 | 1 | 559 |
Common Questions About Mark Water
These are the most common questions residents search for about water quality in Mark, Illinois:
Is Mark water hard or soft? Water hardness varies by source. Mark's 1 water system uses a single source. Check your ZIP code report for specific hardness data.
Can I drink Mark tap water? Mark's water receives a grade of D (54/100). There are 1 health-based violations — consider filtration.
What is the best water filter for Mark? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.
Mark vs. Illinois Average
Understanding how Mark compares to the broader Illinois average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.
To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Mark.
ZIP Codes in Mark
Mark spans 1 ZIP code. The ZIP with the lowest water quality score is 61340. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
- Enforcement: EPA ECHO database
- Filter recommendations: NSF/ANSI certified products
Updated daily.